Siglent SDS1204X-E Manual

Siglent Måling SDS1204X-E

Læs gratis den danske manual til Siglent SDS1204X-E (17 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Siglent SDS1204X-E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/17

Table of Contents

1. Important Safety Instructions 2

2. Overview 3

3. Feature Identication 4

4. Setup 5

4.1 Powering the USB Charger/Hub Unit 5

4.2 Door Locks 5

5. 32-Port USB Charger/Hub 6

5.1 USB Charger/Hub Features 6

5.2 Connecting Smartphones 6

to the USB Charger/Hub

5.3 Connecting a Computer to the 6

USB Charger/Hub

6. Wall Mounting 7

7. Desktop Placement 8

8. Specications 9

9. Storage, Service and Cleaning 10

10. Warranty and Product Registration 10

Español 11

Français

Русский

Deutsch 41

32-Port USB Charging Station

for Smartphones

Models: CSD32USB, CSDXB32USB, CSDXS32USB

(Series number: AG-0737)

Owner’s Manual

TrippLite.Eaton.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

1. Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described

in this manual. Failure to comply may invalidate the warranty and cause property damage or personal injury.

USB Charger/Hub Unit:

• Connect the unit to an outlet that is in accordance with your local building codes and adequately protected against excess current,

short-circuits and earthly faults.

• The electrical outlet supplying power to the equipment should be installed near the unit and be easily accessible.

• The AC plug on the power supply cord serves as the disconnect device.

• Connect the unit directly to a properly grounded AC power outlet.

• Do not modify the plug, and do not use an adapter that would eliminate the ground connection.

• If any of the following situations arise, schedule an appointment with a service technician to have your equipment inspected:

• The equipment has been exposed to moisture

• The equipment has been dropped and damaged

• The equipment shows obvious signs of breakage

• The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of

the life support equipment or to significantly affect its safety or effectiveness is not recommended.

Charging Station Cabinet:

• Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and

gasses, conductive contaminants, dust and direct sunlight.

• Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging

station’s external ventilation openings.

• For best performance, keep indoor temperature between 32°F and 86°F (0°C and 30°C).

• Do not remove any warnings, cautions or descriptive labels from the charging cart.

• The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack or mount it

unassisted. Use a mechanical device such as a forklift or pallet jack to move the charging station in the shipping container.

• Do not place containers of liquid or stack items on the cabinet.

• Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.

• Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original

packing materials may cause product damage that will void the warranty.

For Wall-Mount and Desktop Installations:

• The charging station must be installed by a qualified technician.

• Before mounting, first make sure that the wall surface can safely support the combined load of the charging station, equipment

stored and all attached hardware and components.

• The charging station can support equipment up to its maximum load capacity of 180 lb. (81.6 kg).

• Always use suitable mounting means when installing to cinder blocks, concrete, drywall or wood studs. Install securely to the wall

using proper hardware (not provided).

WARNING: The supporting surface must be able to safely support the combined load of the charging station, equipment stored and all

attached hardware and components (see 8. Specifications for more information on your model’s weight and dimensions).

Produkt Specifikationer

Mærke:	Siglent
Kategori:	Måling
Model:	SDS1204X-E

Har du brug for hjælp?

Hvis du har brug for hjælp til Siglent SDS1204X-E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Siglent Manualer

Siglent SDS1204X-E Manual

15 Juni 2024

Måling Manualer

Nyeste Måling Manualer

Sauermann TH 300 Manual

13 August 2025

Sauermann GP 500 Manual

13 August 2025

Sauermann Si-CA 230 Manual

13 August 2025

Sauermann TK 62 Manual

13 August 2025

Sauermann KIRAY 200 Manual

13 August 2025

Sauermann CT 50 Manual

13 August 2025

Sauermann LV 110 Manual

13 August 2025

Sauermann TM 210 Manual

13 August 2025

Sauermann CO 50 Manual

13 August 2025

Crowcon Xgard XGB Manual

12 August 2025