SIIG CE-MT0612-S1 Manual

SIIG Flad panel støtte CE-MT0612-S1

Læs gratis den danske manual til SIIG CE-MT0612-S1 (8 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om SIIG CE-MT0612-S1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
04-0528A
Low Profile Universal Mount - 32" to 60"
IMPORTANT: If you don't understand the installation instructions, please consult an installation
specialist
Fixed LCD/TFT TV Wall Mount
Material: 2.0mm Cold Rolled Steel Plate
TV Size: 32-60"
Max load capacity:165 lbs/75 kgs
Installation Instructions
Wall distance: 30mm/1.2"
Bubble level system included
Universal Mounting Pattern
A G
B H
C I
D J
E K
F L
M
(×4) M8 concrete anchor
(×4) M4×35 screw (×6) M8 Washer
(×4) M8 Spacer
(×4) M8×35 screw
The wall structure must be capable of supporting at least the maximum load capacity as indicated. If not, the wall must be
reinforced. Proper installation procedure by yourself or a qualified service technician, as outlined in the installation
instructions, must be adhered to. Failure to do so could result in serious personal injury.
Do not install near heater, fireplace, air conditioning, in direct sunlight, or any other heat producing source. Failure to do so
may result in damage to the display and could increase the risk of fire.
(×4) M4×12 screw
When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it is
recommended that the wood studs be a minimum of 16" apart.
(×4) M6×16 screw (×6) Bolt
(×4) M8×16 screw
INSTALLATION AND OPERATING INSTRUCTIONS
(×4) M6×35 screw
Caution
Hardware kit:
It is recommended that two people perform the installation. Injury and/or damage can result from dropping or mishandling
the display.
CAUTION: The maximum load capacity is 165 lbs. Use with products exceeding the maximum load capacity may cause
serious injury. See apparatus instructions.
(×4) M8/M6/M5 Washer
(×4) M4×16 screw
(×4) M5×16 screw
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in
damage to the display and/or damage to the mounting surface.
Recommended mounting surfaces: wood stud and solid-flat concrete. If the mount is to be installed on any surface other
than wood studs, use suitable hardware (not included but commercially available).
Prior to the installation of this product, the installation instructions should be read and completely understood. The
installation instructions must be read to prevent personal injury and property damage. Keep these installation instructions
in an easily accessible location for future reference.

Produkt Specifikationer

Mærke: SIIG
Kategori: Flad panel støtte
Model: CE-MT0612-S1
Bredde: 494 mm
Dybde: 820 mm
Højde: 300 mm
Vægt: 3000 g
Produktfarve: Sort
Monteringstype: Væg

Har du brug for hjælp?

Hvis du har brug for hjælp til SIIG CE-MT0612-S1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Flad panel støtte SIIG Manualer

SIIG

SIIG CE-MT0612-S1 Manual

31 August 2024

Flad panel støtte Manualer

Nyeste Flad panel støtte Manualer

Ateca

Ateca VARIATION00376 Manual

26 Februar 2025
Ateca

Ateca SILHOUETTE00383 Manual

26 Februar 2025
Ateca

Ateca ELLIPSE00381 Manual

26 Februar 2025
Ateca

Ateca SILHOUETTE00384 Manual

26 Februar 2025
Ateca

Ateca CRESCENDO00388 Manual

26 Februar 2025
Ateca

Ateca AT247BA Manual

26 Februar 2025
Ateca

Ateca LEDE00224 Manual

26 Februar 2025
Ateca

Ateca UNIQUE00335 Manual

26 Februar 2025
Ateca

Ateca LEGEND00176 Manual

26 Februar 2025
Ateca

Ateca LUXE00281 Manual

26 Februar 2025