SIIG CE-WR0112-S1 Manual

SIIG Trådløs oplægsholder CE-WR0112-S1

Læs gratis den danske manual til SIIG CE-WR0112-S1 (1 sider) i kategorien Trådløs oplægsholder. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om SIIG CE-WR0112-S1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Using the Wireless Presnter

1. Open the cover of battery compartment and

insert two AAA batteries. Note: Make sure the

positive (+) and negative (-) ends of the battery

match indicators inside the battey

compartment.

2. Pull out the USB receiver from the storage

compartment at bottom of presenter unit,

reference to Figure 2. Then insert it into an

available USB port of your computer. Your

computer will identify the receiver

automatically.

* No software installation required

3. The Presenter is ready to use now.

Important: Never point a laser beam into a

person`s eyes or view directly.

Figure : USB receiver

2.4GHz RF Wireless

Presenter

User Reference Guide

Introduction

The 2.4GHz RF Wireless Presenter allows you to remote

control presentation effectively. The plug-and-play

design helps quick set up and concentrate on matter

most important. The 2.4GHz technology frees you

wireless up to 33 feet.

Technical Support and Warranty

QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at

www.siig.com and click Support. Our online support database is updated daily with new

drivers and solutions. Answers to your questions could be just a few clicks away. You can

also submit questions online and a technical support analyst will promptly respond.

SIIG offers a 2-year manufacturer warranty with this product. This warranty covers the

original purchaser and guarantees the product to be free of any defects in materials or

workmanship for two (2) years from the date of purchase of the product.

SIIG will, at our discretion, repair or replace (with an identical product or product having

similar features and functionality) the product if defective in materials or workmanship.

This warranty gives you specific legal rights, and you may also have other rights which vary

from state to state. Please see our web site for more warranty details.

If you encounter any problems with this product, please follow the procedures below.

A) If it is within the store's return policy period, please return the product to the store where

you purchased from.

B) If your purchase has passed the store's return policy period, please follow the steps below

to have the product repaired or replaced.

Step 1: Submit your RMA request.

Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT

to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request

will be processed, if the product is determined to be defective, an RMA number will

be issued.

Step 2: After obtaining an RMA number, ship the product.

• Properly pack the product for shipping. All accessories that came with the

original package must be included.

• Clearly write your RMA number on the top of the returned package. SIIG will

refuse to accept any shipping package, and will not be responsible for a product

returned without an RMA number posted on the outside of the shipping carton.

• You are responsible for the cost of shipping to SIIG. Ship the product to the

following address:

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

RMA #:

• SIIG will ship the repaired or replaced product via Ground in the U.S. and

International Economy outside of the U.S. at no cost to the customer.

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity

solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and

legacy I/O adapters) that bridge the connection between Desktop/Notebook

systems and external peripherals. SIIG continues to grow by adding A/V and

Digital Signage connectivity solutions to our extensive portfolio.

SIIG products offer comprehensive user manuals, many user-friendly features,

and are backed by an extensive manufacturer warranty. High quality control

standards are evident by the overall ease of installation and compatibility of our

products, as well as one of the lowest defective return rates in the industry. SIIG

products can be found in computer retail stores, mail order catalogs, through

major distributors, system integrators, and VARs in the Americas and the UK,

and through e-commerce sites.

PRODUCT NAME

2.4 GHz RF Wireless Presenter

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B

OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.

6078 Stewart Avenue

Fremont, CA 94538-3152, USA

Phone: 510-657-8688

2.4 GHz RF Wireless Presenter is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered

trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft

Corporation. All other names used in this publication are for identification only and may be

trademarks of their respective owners.

System Requirements

• Desktop, notebook PC or MAC with an

available USB port

• Windows

8 (32-/64-bit) / 7 (32-/64-bit) / Vista

(32-/64-bit) / XP (32-/64-bit)

•Mac OS 10.4 or later

Package Contents

•2.4GHz RF Wireless Presenter

• USB receiver

• Carrying pouch

• 2 x AAA Batteries

• User Reference Guide

Layout

Note: The actual remote distance may vary by

surrounding environment.

Key Features and Benefits

• 2.4GHz wireless technology supports Windows

and Mac OS based laptop and desktop computer

systems

• Ergonomic design with 4 easy-access function

buttons - page up, page down, start/exit

slideshow and black screen

• Receiver storage compartment with power

control feature, presenter unit will automatic

turn off when receiver is stored

• Integrated laser beam pointer

• Powered by 2 x AAA batteries, batteries

included

Specifications

04-0978A

Note: When plug the USB receiver back

into the storage compartment, the power of

presenter unit will automatic turn off to

prolong the battery life.

• Make sure the distance from the presenter to

the receiver is within 33 ft.

• Check whether the batteies match the

corresponding indicators.

• Check the remaining battery power.

• Unplug and plug the USB receiver into the USB

port of your computer. If still doesn`t work,

restart your computer.

Notice

•Never point the presenter`s laser beam at

people`s eyes or view directly.

• Avoid pointing the presenter`s laser beam at a

mirror or highly-reflective surface.

• Avoid serious impact or drop which may

physically damage to the unit.

•DO NOT attempt to disassemble and service

the presenter.

• Keep the presenter away from children.

Trouble Shooting

1. What do I do if the presenter doesn`t work

properly?

Laser Beam

Laser button

Start / Exit

Slideshow

Status

Indicating LED

Page Up

Page Down

Black Screen

Receiver Storage

Compartment

Figure 2: 2.4GHz RF Wireless Presenter

Remote Range Up to 33 ft

Power Source AAA battery x2

Size 5.19" (L) x 1.25" (W) x 1.10" (H)

Weight 0.07 lbs

Laser Beam Class II laser

1 2 3 4

5 6

Produkt Specifikationer

Mærke:	SIIG
Kategori:	Trådløs oplægsholder
Model:	CE-WR0112-S1
Bredde:	32 mm
Dybde:	28 mm
Højde:	132 mm
Vægt:	32 g
Brugervejledning:	Ja
Produktfarve:	Sort
Batterier inkluderet:	Ja
Certificering:	FCC, CE
LED-indikatorer:	Ja
Batteritype:	AAA
Mac kompabilitet:	Ja
Antal understøttede batterier:	2
Bæretaske:	Ja
Bæredygtighedscertifikater:	RoHS
Trådløs teknologi:	RF
Antal knapper:	5
Frekvensbånd:	2.4 GHz
Modtager inkluderet:	Ja
Brugergrænseflade med trådløs modtager:	USB
Trådløs rækkevidde:	10 m
Understøttede Windows-operativsystemer:	Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 8, Windows 8 x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows XP Home, Windows XP Home x64
Understøttede Mac-operativsystemer:	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Præsentationsfunktioner:	Laser pointer, Remote control