Silicon Power Ace A55 Manual

Silicon Power Solid State-drev (ssd) Ace A55

Læs gratis den danske manual til Silicon Power Ace A55 (13 sider) i kategorien Solid State-drev (ssd). Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Silicon Power Ace A55, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

SSD Firmware Update Software

Supported Operating Systems

Supported on 32 and 64-bit. XP SP3 Vista SP2 Win 7/8/8.1/10、、

Note:

1. Microsoft AHCI driver is required and Microsoft AHCI mode must be enabled on your computer.

2. You must have Administrator privileges on your computer to run this utility.

3. If update failed, please help try to demount the IRST mode.

Before Use

1. Updating your device may result in data loss. Therefore, we strongly recommend you back up your

data before proceeding.

2. Please DO NOT unplug the device or the power source during firmware update. This may cause

unpredictable damage.

3. Use only native SATA ports to perform upgrade. Do NOT use third party controllers.

Getting Started

1. Connect the Silicon-Power SSD to your PC or laptop . (To be used SATA interface directly. Do not used

USB HUB)

2. Unzip the

SSD Update Tool.rar

file that is downloaded from SP website.

3. Double click icon and open “SSD firmware update software”.

4. SSD firmware update software will automatically scan and pop up all drives as below:

Please select the drive that you want to update the firmware.

5. After drive selection, the SSD firmware update software will automatically download the

corresponding firmware update program.

Produkt Specifikationer

Mærke:	Silicon Power
Kategori:	Solid State-drev (ssd)
Model:	Ace A55
Bredde:	100 mm
Dybde:	69.85 mm
Højde:	7 mm
Produktfarve:	Sort
Beskyttelsesfunktioner:	Shock resistant, Vibration proof
Harmoniseret systemkode (HS):	84717070
Skrivehastighed:	- MB/s
Grænseflade:	Serial ATA III
SDD-kapacitet:	128 GB
SSD-formfaktor:	2.5"
Hukommelsestype:	SLC
Komponent til:	Laptop
Gennemsnitstid mellem fejl (MTBF):	1500000 t
Understøtter S.M.A.R.T.:	Ja
Understøttelse af TRIM:	Ja
Dataoverførselshastighed:	6 Gbit/sek.
Understøtter RAID:	Ja
Fejlkorrigerende kode:	Ja
Sekventiel skrivehastighed (ATTO):	420 MB/s
Sekventiel læsehastighed (ATTO ):	550 MB/s
Native Command Queuing (NCQ):	Ja
Sekventiel læsehastighed (CDM):	460 MB/s
Sekventiel skrivehastighed (CDM):	370 MB/s
NAND flash type:	SLC (Single Level Cell)