SKS Airstep Digi Manual

SKS Pumpe Airstep Digi

Læs gratis den danske manual til SKS Airstep Digi (2 sider) i kategorien Pumpe. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om SKS Airstep Digi, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

MAX

BAR

MAX

PSI

102

GERMANY

● AIRSTEP

100

200

300

400

500

600

700

21 3 4 5 6 7

MANUAL AIRSTEP DIGI 11650¬ ¬ ALLROAD MOUNTAIN

EN . AIRSTEP – the perfect foot pump

AIR-GONOMY meets evolution: the new AIRSTEP combines the virtues of a classic foot pump with the high technology by MADE IN GERMANY. Perfect materials of

the highest quality, a well thought-out construction and userfriendly features such as the large pressure gauge and the integrated storage space for the hose give the

pump a completely new pump experience. The MulitValve head serves all valve types. Due to the ergonomic operating of the robust aluminum foot step the AIRSTEP.

is able to reach the highest possible effective pumping pressure up to 7 bar effortlessly. Fast, comfortable and easy. Inating has been never simpler and easier for

the backbone: truly »air-gonomic«!

Professionally developed and scientifically confirmed: a unique foot pump is the result of support provided by the ergonomics experts at SQlab, this requiring a consi-

derably reduced effort when pumping up tyres when compared with conventional floor pumps (tested by the Department of Sport Science at the University of Bayreuth).

THE EFFORT REQUIRED WHEN PUMPING DEPENDS ON THE AIR PRESSURE

TYRE PRESSURE (bar)

FORCE (N)

● conventional ﬂoorpump

Incl. wall bracket

GERMANY

6 .9 7

PSI

BAR

BAR/PSI

6 .9 7

PSI

BAR

BAR/PSI

MANUAL AIRSTEP DIGI 11650¬ ¬ ALLROAD MOUNTAIN

EN . AIRSTEP DIGI – CHANGING THE BATTERY

1. If the battery of the digital manometer is empty,

the following symbol appears in the lower right corner.

3. Lay the pump on its side. Now loosen the two screws on the back of the pressure

gauge using a Phillips screwdriver.

PLUS TERMINAL

TOP

MINUS TERMINAL

TOP

5. Now screw the battery compartment cover back on (caution: only tighten the screws so that they are hand tight.)

4. Lift the battery compartment cover off and replace the batteries (2 x 1.5 V AAA). It is imperative that you note the Plus and Minus symbols at the edge of the battery

compartment. Insert the batteries so that the plus terminal is placed on the positive side and the minus terminal of the battery is placed on the negative terminal so that

the symbols can be seen.

Please change the battery as follows:

2. Loosen the foot pedal by pushing the orange locking button

on the front to the right.