Smart-AVI DVN-4PS Manual

Smart-AVI Skifte DVN-4PS

Læs gratis den danske manual til Smart-AVI DVN-4PS (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Smart-AVI DVN-4PS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Front

NOTICE

T h e i n f o r m a t i o n c o n t a i n e d i n t h i s d o c u m e nt

is subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and fitness for any particular purpose.

Smart-AVI will not be liable for errors contained herein or for

incidental or consequential damages in connection with the

furnishing, performance or use of this material.

No part of this document may be photocopied, reproduced or

translated into another language without prior written consent

from Smart-AVI.

For more information, visit www.smartavi.com.

SmartAVI, Inc. / Twitter: smartavi

11651 Vanowen St. North Hollywood, CA 91605

Tel: (818) 503-6200 Fax: (818) 503-6208

http://www.SmartAVI.com

Control 4 Computers, PC or Mac on

one Display Up To 20 Feet Away

with USB 2.0 Keyboard and Mouse,

Stereo Audio and IR Control

DVN- P4

4-Port Cross-platform DVI-D KVM

with USB 2.0, Stereo Audio,

RS-232 and IR Control

www.smartavi.com

Installation

Manual

Technical Specications

What’s in the Box?

PART NO. QTY DESCRIPTION

DVN-4PS 1 DVNET-4P, 4X1 DVI-D, USB2.0, Audio switch

Power Supply 1 PS5VDC2A

User Manual 1

Rear

VIDEO

Format DVI-D Single Line

Maximum Pixel Clock 165 MHz

Input Interface (4) DVI-D 29-pin female

Output Interface (1) DVI-D 29-pin female

Resolution Up to 1920 x 1200 @60Hz

DDC 5 volts p-p(TTL)

Input Equalization Automatic

Input Cable Length Up to 20 ft.

Output Cable Length Up to 20 ft.

AUDIO

Frequency Response 20 Hz to 20 KHz

Impedance 600 ohm

Nominal Level 0-1.0 V

Common Mode Rejection at 60dB

Input Interface (4) 3.5 mm Stereo Audio

Output Interface (1) 3.5 mm Stereo Audio

USB

Signaling USB 2.0, 1.1 and 1.0 w/ Internal Hub

Input Interface (4) USB Type B

Output Interface (2) USB Type A

CONTROL

Front Panel Tact Switch

RS232 Via Software @ 9600 bps

IR Via Remote Control with IR-EYE Type 3

OTHER

Power External 100-240 VAC/5VDC2A

Dimensions 10.5”W x 1.875”H x 6”D

Weight 6 lbs.

Approvals UL, CE, ROHS Compliant

Operating Temp. 32-131°F (0-55 °C)

Storage Temp. -4-185 °F (-20-85 °C)

Humidity Up to 95%

Emulation NO KEYBOARD OR MOUSE EMULATION

Introduction

The DVN-4P is a cross-platform DVI-D switch capable of

sharing one DVI-D Monitor between four computers,

PC or Mac. View four computers equipped with DVI-D

on a single screen, saving money and desktop space.

Features

• Supports Mac, PC, Linux and Sun DVI-D

• Supports High Resolution1920x1200 60 Hz WUXGA

• Uses universal DVI Single Link connectors

• Zero pixel loss with TMDS signal correction

• Output DVI up to 20 feet

• Front panel switch with LED indicator

• Saves space on your desktop

Applications

• Home Theater Integration

• Digital Signage Deployment

• Information Kiosks/Displays

• Film/Recording Studios

In the medical or industrial eld, where it may not be

practical (or safe) to have one or more CPUs in the

general vicinity, SmartAVI’s DVI Switch Series is the

perfect solution, allowing for either PC or Mac signals

to be extended from computer to monitor (20 feet from

computer to DVI Switch, and then 20 feet from DVI

Switch to remote monitor/display point).

Another practical use for one of our DVI Switch would

be for media recording studios, where soundproong

and space issues come into play. Using a DVI Switch

eliminates the inherent “hum” of a powered CPU and

gives you the freedom of using your keyboard, mouse

and monitor without having to nd room for the

computer itself in the same workspace.

Product - Installation Diagram

Installation

1. Turn o all computers and the display.

2. Connect the DVI extension cables, USB cables, and audio cables (not included) to the computers and to the “IN”

ports on the DVN-4P.

3. Connect the display to the “OUT” DVI connector on the DVN-4P.

4. Connect USB devices, including mouse and keyboard, to the “OUT” USB connector on the DVN-4P.

5. Connect speakers to the “OUT” audio connector on the DVN-4P.

6. Connect the power cord and power on the DVN-4P.

7. Power on the computers and the display.

8. Use the front panel buttons, an RS-232 connection or infrared remote control to select the desired input port.

DVN-4P

Mac

Switching Between Ports

There are three ways to switch between inputs on the DVN-4P: via the

front panel buttons, RS-232 connection or IR remote control.

Front Panel Control

To switch ports using the front panel, press either the up or down

button to cycle through the available ports. The selected port number

will be indicated on the LED display.

RS-232 Control

To switch ports using an RS-232 connection, use a male-to-female

serial cable to connect a computer to the DVN-4P’s RS-232 port. Use

Hyperterminal to connect to the DVN-4P, making sure to use the

standard communication mode of 9600bps, 8, N, 1.

To switch ports, use the standard “//M” command prompt.

To select the “IN 1” port, send “//M01 [ENTER]”

To select the “IN 2” port, send “//M02 [ENTER]” etc.

IR Control

To switch ports using an infrared remote control (optional accessory),

connect an IR-EYE (optional accessory) to the DVN-4P box and the

unit will auto-detect the infrared connection. Once the connection is

made, you may use the IR remote to cycle through the available ports.

DDC Learning

The DVN-4P is fully capable of “learning” and remembering what

type of display monitor is connected to the unit. Programming the

DDC (Display Data Channel) is accomplished using the two buttons

located on the front panel.

To enter Learning Mode, simply depress both buttons at once until

the display reads . By then pressing the Down/Left button, you “L”

may cycle through the following DDC learning modes:

“P” indicates Personal Computer Mode and automatically selects the

standard display characteristics of a PC display, which typically works

for any PC/Display combination.

“A” indicates Apple Mode and selects the best display mode to

accommodate a Mac.

“S” indicates Screen Mode, which replicates the type of device

connected to the “IN 1” port.

NOTE: THE USB OPERATION OF THE DVN-4P IS FULLY TRANSPARENT.

TO ATTACH ADDITIONAL USB DEVICES A USB HUB MAY BE USED.

Produkt Specifikationer

Mærke:	Smart-AVI
Kategori:	Skifte
Model:	DVN-4PS

Har du brug for hjælp?

Hvis du har brug for hjælp til Smart-AVI DVN-4PS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Smart-AVI Manualer

Smart-AVI SM-MST-2D Manual

7 Januar 2025

Smart-AVI SM-DVN-84X Manual

7 Januar 2025

Smart-AVI HDN-4PLUS-S Manual

28 December 2024

Smart-AVI SX-RX200S Manual

28 December 2024

Smart-AVI RK-DVX2U-A-RX8S Manual

28 December 2024

Smart-AVI RK-DVX2U-A-RX4S Manual

28 December 2024

Smart-AVI SX-RX500S Manual

28 December 2024

Smart-AVI SDX-PLUS-RX Manual

28 December 2024

Smart-AVI HDN-8P Manual

28 December 2024

Smart-AVI HDMV-PLUS Manual

25 December 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025