Smart-AVI DVS-400 Manual

Smart-AVI Splitter DVS-400

Læs gratis den danske manual til Smart-AVI DVS-400 (2 sider) i kategorien Splitter. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Smart-AVI DVS-400, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

4-Port DVI-D CAT6 STP Extender

4-PORT DVI-D CAT6 STP

EXTENDER

Quick Start Guide

VIDEO

Format DVI (Single Link)

Input Interface (1) DVI, (1) DVI (local monitor)

Resolution Up to 1920 x 1200 @ 60 Hz

OTHER

Power PS5VDC2A

Dimensions 3.75” W x 5” L x .875” H

Operating Temp. +32 to +104°F (0 to +40°C)

Storage Temp. -4 to 140°F (-20 to +60°C)

Humidity Up to 95% (non-condencing)

NOTICE

The information contained in this document is

subject to change without notice. SmartAVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and tness for particular purpose.

SmartAVI will not be liable for errors contained

herein or for incidental or consequential damages in

connection with the furnishing, performance or use of

this material.

No part of this document may be photocopied,

reproduced, or translated into another language

without prior written consent from SmartAVI

Technologies, Inc.

800.AVI.2131, 702.800.0005

2455 W Cheyenne Ave, Suite 112

North Las Vegas, NV 89032

SmartAVI.com

TECHNICAL SPECIFICATION

DVS-400

WHAT’S IN THE BOX

PART NO. DESCRIPTIONQ-TY

DVS-400 1 4-Port DVI-D CAT6 STP

Extender Transmitter

DVX-RX200 1 DVI-D/PC CAT6 STP Receiver

Power Supply 2 PS5VDC2A

Quick Start Guide 1

OVEVIEW

DVS-400 extends any DVI-D signal up to 220 feet to four

displays and one local screen using Cat6 cabling while

retaining perfect image quality at resolutions up to

1920 x 1200. SmartAVI, Inc.’s DVS-400 allows you to

extend a DVI-D signal to up to four remote displays via one

small unit that also loops a signal back to your computer so

local monitoring is possible and simple.

A great example would be a retail shop running its digital

signage from a computer in its back ofce; using the

DVS-400, a media le or group of les could be broadcast

to up to four screens situated around the store while also

being viewed locally on that computer’s monitor.

Quite simply, the outgoing DVI-D signal from your computer

is plugged into the DVS-400. This box has one input and

four outputs, so that your signal can be sent up to 220 feet

over inexpensive CAT6 cables to display screens anywhere

in your retail shop, lounge, etc. In addition to the four

outgoing signal ports, the unit also has a loop-back port

that goes back to your computer, so that you may monitor

exactly what is being broadcast to the remote screens. This

is all done from a single unit with one power supply.

On power-up, the DVS-400 reads and stores the EDID of

the DVI monitor connected to the local loop-back port. From

that point on, even if the local monitor is not attached to

the unit, its DDC is retained in the ash memory of the

DVS-400 unit and it will operate as if the monitor were

connected, offering unhindered use and simple exibility.

FEATURES

• Local DVI output.

• Perfect Image Quality at all Resoluons

• Video Resoluons up to 1920 x 1200 @ 60Hz

(1280 x 1024 @ 75Hz) on all distances to the

maximum limit

• Automac DDC Learning From Local Monitor

• DDC Tables Stored in Flash Memory for Future Use

• Unit Operates Regardless of Local Monitor

Connecvity

• Distances: up to 220 Feet via STP CAT5e or STP

CAT6 Cable(Best Quality/Distance)

• Compable With all Operang Systems

• Rack Mount Opons(19”): Mount up to Four

DVS400 Units in a 19”/1U Rack Mount Kit, Saving

Expensive Rack Space

• MAC or PC Versions Available

1. Turn off computer and monitor.

2. Connect DVI male to male cable between the computer and the transmitter.

3. Connect monitor or projector to the local loopback DVI port on the transmitter.

4. Turn on the monitor.

5. Plug in one of the power transformers and connect it to the transmitter.

6. Remove the monitor from the local loopback DVI port on the transmitter and connect it to the DVI port on the receiver.

7. Connect a shielded CAT6 cable between port 1 on the transmitter and port 1 on the receiver.

8. Plug in the other power transformer and connect it to the receiver.

9. Turn on the computer.

HARDWARE INSTALLATION

DVS-400 FRONT DVS-400 BACK

DVI IN

DVI OUT

CAT6

220 ft

DVS-400-TX

DVX200-RX DVX200-RX DVX200-RX DVX200-RX

Produkt Specifikationer

Mærke:	Smart-AVI
Kategori:	Splitter
Model:	DVS-400
Vekselstrømsindgangsspænding:	100-240 V
Produktfarve:	Sort
Ethernet LAN-porte (RJ-45):	4
Ethernet LAN:	Ja
Dimensioner (BxDxH):	95 x 127 x 22225 mm
Understøttede grafikopløsninger:	1280 x 1024 (SXGA), 1920 x 1200 (WUXGA)
DC-in-stik:	Ja
Kabellængde:	67 m
Full HD:	Ja
Video porttype:	DVI
Antal videoporte:	2