Smart-AVI RK-DVS4P-8S Manual

Smart-AVI Splitter RK-DVS4P-8S

Læs gratis den danske manual til Smart-AVI RK-DVS4P-8S (2 sider) i kategorien Splitter. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Smart-AVI RK-DVS4P-8S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Notice

The information contained in this document is

subject to change without notice. Smart-AVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties

of merchantability and fitness for any particular

purpose.

Smart-AVI will not be liable for errors contained

herein or for incidental or consequential damages

in connection with the furnishing, performance or

use of this material.

No part of this document may be photocopied,

reproduced or translated into another language

with

out prior written consent from Smart-AVI.

The DVI-I 4 port splitter allows you to use

a single PC/MAC to display

identical images on multiple monitors.

DVS4P

www.smartavi.com

User Manual

2840 N. Naomi Ave.

Burbank, California 91504

Phone: (818) 565-0011

Facsimile: (818) 565-0020

Technical Specifications

Input/Output Signal

Pin # Signal SignalPin #

1 T.M.D.S Data 2- 16 Hot Plug Detect

2 T.M.D.S Data 2+ T.M.D.S Data 0-17

3 T.M.D.S Data 2/4 Shield T.M.D.S Data 0+18

4 T.M.D.S Data 4- T.M.D.S Data 0/5 Shield19

5 T.M.D.S Data 4+ T.M.D.S Data 5-20

6 DDC Clock 21 T.M.D.S Data 5+

7 DDC Data 22 T.M.D.S Clock Shield

8 Analog Vert. Sync 23 T.M.D.S Clock+

9 T.M.D.S Data 1- T.M.D.S Clock -24

10 T.M.D.S Data 1+

11 T.M.D.S Data 1/3 Shield C1 Analog Red

12 T.M.D.S Data 3- C2 Analog Green

13 T.M.D.S Data 3+ C3 Analog Blue

14 +5V Power C4 Analog Horz Sync

15 GND C5 Analog Ground

Video Input 1 DVI Female

Video Output 4 DVI Female

Max. Resolution 1920 x 1200 60 @ Hz

Cable Distance to Monitor 10 m (max)

Signal Type Standard DVI Signal

Power Adapter (min) 5VDC 1A

Housing Metal

Weight .65lb (.29kg)

Dimensions (LxWxH) 7.93” x 3.56” x 1.56”

m_DVS4P-012709

Specifications

Introduction

The DVS4P splitter allows you to use a single PC to

display identical images on multiple monitors.

DVI Splitter is ideal for:

 Test bench facilities

 Data Center

 Help Desks

Features

 Use PanelLink digital technology

 Supports high-resolution dislplay up to UXGA

(25-165MHz)

 Can be cascaded

 Compliant with the specification of DVI 1.0

 Resolution up to 1920 x 1080

No degradation of video quality

External pwer supply

Automatic EDID learning fo the support of

any DVI monitor.

DVI and VGA

Package Contents

 1 DVS4P 4Port DVI splitter

 1 User Manual

 1 Power Adapter 5VDC 1A

Installation

1. Turn off computer and monitor.

2. Connect DVI male extension cable between the

PC and the “video in” port of splitter.

3. Connect the DVI male/female extension cables

between the monitors and the “DVI out” ports

of splitter.

4. Connect the power cord and turn on the

splitter.

5. Turn on PC and monitors.

Operation for Cascade

1. The function to display identical images on

more monitors, is an attachment of another

splitter.

2. Connect the DVI male/female extendion cable

between the former splitter of the “DVI out 1”

port and the latter splitter of the “video in” port.

Note:

Even though you are allowed to cascade the splitter

with varied ports, the image might become unstable

if you cascade too many tiers of splitters.

Installation Diagram

EDID Learning

The Display Data Channel (DDC) is a digital

connection between a computer display and

a graphics adapter that allows the display to

communicate its specifications to the adapter.

The Extended Display Identification Data (EDID) is a

data structure provided by a computer display over

the DDC to describe its capabilities to a graphics

card.

The DVS4P does not continue the DDC across the

CAT6 STP links and contains its own EDID at the

video source input. Therefore, the EDID on the

DVS4P is used in place of the actual monitors EDID.

In order for the computer to output at the correct

resolution and refresh rates for a specific monitor,

the DVS4P must be loaded with the monitors EDID.

On power-up the DVS4P reads and stores the EDID

of the DVI monitor connected to the local loopback

port. IF the local loopback port is disconnected

during power-up, the stored EDID will not be

modified.

Produkt Specifikationer

Mærke:	Smart-AVI
Kategori:	Splitter
Model:	RK-DVS4P-8S

Har du brug for hjælp?

Hvis du har brug for hjælp til Smart-AVI RK-DVS4P-8S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Splitter Smart-AVI Manualer

Smart-AVI HDS-2P Manual

9 April 2025

Smart-AVI HDS-8P Manual

8 Januar 2025

Smart-AVI AVS-2P Manual

28 December 2024

Smart-AVI HDS2PS Manual

28 December 2024

Smart-AVI VS4PS Manual

25 December 2024

Smart-AVI RK-DVS4P-8S Manual

25 December 2024

Smart-AVI HDS16P Manual

25 December 2024

Smart-AVI VS8PS Manual

25 December 2024

Smart-AVI VS4P Manual

21 December 2024

Smart-AVI VS2P Manual

21 December 2024

Splitter Manualer

Nyeste Splitter Manualer

AMX FG1052-16 Manual

14 September 2025

AMX FG1052-13 Manual

14 September 2025

AMX AVB-DA-RGBHV-HD15-0106 Manual

14 September 2025

Sonifex Redbox RB-AES4B3 Manual

11 September 2025

Speaka SP-HDS-220 Manual

7 September 2025

Speaka SP-HDS-240 Manual

6 September 2025

Gefen GTB-HD4K2K-144 Manual

4 September 2025

Gefen GTB-HD4K2K-148 Manual

4 September 2025

Edision 4K HDMI Splitter 1x4 Manual

26 August 2025

Samsung AM048FNMDCH Manual

24 August 2025