Smart-AVI SM-UHO-16P Manual

Smart-AVI Skifte SM-UHO-16P

Læs gratis den danske manual til Smart-AVI SM-UHO-16P (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Smart-AVI SM-UHO-16P, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX

VIDEO

Fornat HDMI2.0

Input Interface (16) HDMI 19-pin

Output Interface (1) HDMI 19-pin

Resolution

Up to 4K (3840 x 2160 @ 30 Hz);

Up to 1920 x 1080 @ 60Hz (DVI-D)

DDC 5 volts p-p (TTL)

Input Equalization Automatic

Input Cable Length Up to 20 ft

Output Cable Length Up to 20 ft

USB

Signal Type USB 2.0, 1.1, and 1.0 w/ internal hub

Input Interface (16) USB Type B

Output Interface

(2) USB 1.1 Type A for KVM Devices;

(2) USB 2.0 Type A Transparent

CONTROL

Front Panel Push Buttons with LED Indicators

RS-232 Via Control @ 115200 bps

Hot Keys Via Keyboard

OSD Via KM arrow keys

OTHER

Power

External 100-240 VAC/ 12VDC3A

@ 24W

Dimensions 17.0” W x 2.7” H x 8.69” D

Weight 6.9 lbs

Approvals UL, CE, ROHS Compliant

Operating Temp. 32 to +104°F (0 to +40°C)

Storage Temp. -4 to 140°F (-20 to +60°C)

Humidity Up to 80% (no condensation)

Emulation Keyboard and Mouse

PART NO. QTY DESCRIPTION

SM-UHO-16P 1

SH 16-Port HDMI KVM Switch with

USB 2.0 Support and OSD

PS12VDC3A 1

12-VDC, 3-A power adapter with

center-pin positive polarity.

1 Quick Start Guide

DESIGNED

AND MADE

IN THE USA

NOTICE

The information contained in this document

is subject to change without notice. iPGARD

makes no warranty of any kind with regard

to this material, including but not limited to,

implied warranties of merchantability and

tness for a particular purpose. iPGARD

will not be liable for errors contained

herein, or for incidental or consequential

damages in connection with the furnishing,

performance, or use of this material. No

part of this document may be photocopied,

reproduced, or translated into another

language without the prior written consent

from iPGARD, Inc.

20170518

Toll Free: (888)-994-7427

Phone: (702) 800-0005

Fax: (702)-441-5590

WWW.iPGARD.COM

A full manual can be downloaded from

www.ipgard.com/documentation/

SM-UHO-16P

16-Port HDMI KVM Switch

with USB 2.0 Sharing and OSD

Quick Start Guide

HARDWARE INSTALLATION

1. Ensure that power is turned off or disconnected from the unit and the computers.

2. Use HDMI cables to connect the HDMI output ports from each computer to the

corresponding HDMI IN ports of the unit.

3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the

respective USB ports of the unit.

4. Optionally, connect a stereo audio cable (3.5 mm to 3.5 mm) to connect the audio output of

the computer(s) to the audio in ports of the unit.

5. Connect monitor(s) to the HDMI out console ports of the unit using HDMI cable(s).

6. Connect a USB keyboard and mouse in the two USB console ports.

7. Optionally, connect stereo speakers to the audio out port of the unit.

8. Optionally use included 3.5mm to DB9 Cable and connect with a standard RS-232 Cable

(not included) to connect to a PC for Serial Control

9. Finally, power on the secure KVM switch by connecting a 12-VDC power supply to the power

connector, and then turn on all the computers.

Note: You can connect one monitor to the single-head KVM switch. The computer connected to

port 1 will always be selected by default after power up.

There are three ways to control

the KVM Switch: Keyboard HotKeys, RS-232

Serial Commands, and Front Panel Buttons.

The settings for the serial connection are as

follows: Baud rate: ; Data Bits: ; 115200 8

Parity: ; Stop Bits: ; Flow Control: .None 1 None

The following commands can be used:

Users are able to customize the keys that

trigger Hotkeys. The following keys are

allowed: CT (Left/Right), Alt, Shift (Left/

Right), Caps Lock, Scroll Lock, F1-F12

Change HK Trigger

HK + HK + X + desired hotkey

View Current HK Trigger

Use the RS-232 command: //??<CR>

Reset HK Trigger

Run “Restore Factory Defaults” command.

Default HotKey Trigger

CT (Left)

Chart Key

[CT] = Ctrl

<CR> = Carriage Return (Enter Key)

[HK] = Current Hot Key Trigger

SYSTEM CONTROL

CUSTOM HOTKEY TRIGGERS

Command Hotkey RS-232

Switch KVM

[CT][CT][#]<CR> // [#]<CR> m

Audio Only

[CT][CT] [#]<CR> // [#]<CR>a a

KM Only

[CT][CT] [#]<CR> // [#]<CR>c c

USB Only

[CT][CT] [#]<CR> // [#]<CR>u u

Learn EDID

[CT][CT] [#]<CR> // [#]<CR>e e

Trigger Hotplug

[CT][CT] <CR> // <CR>h h

Restore Factory Defaults

[CT][CT] <CR> // <CR>f f

Reset Software

[CT][CT] // <CR>r r

Get Port Status

N/A // <CR>??

HDMI IN

HDMI OUT

USB IN

USB K/M OUT

USB 2.0 OUT

Keyboard hotkeys for OSD:

Command Hotkey

OSD ON/OFF

[CT][CT] <CR>o

OSD Up

↑ (UP arrow)

OSD Down

↓ (DOWN arrow)

OSD Left

← (LEFT arrow)

OSD Right

→ (RIGHT arrow)

OSD Enter

[ENTER]

OSD Esc

[ESC]

OSD Menu

Important: when in OSD menu, all

keyboard and mouse functionality

will be blocked from the computer

and only used for the OSD

commands. After exiting the OSD

menu, all keyboard and mouse

functionality will be restored.

Produkt Specifikationer

Mærke:	Smart-AVI
Kategori:	Skifte
Model:	SM-UHO-16P

Har du brug for hjælp?

Hvis du har brug for hjælp til Smart-AVI SM-UHO-16P stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Smart-AVI Manualer

Smart-AVI SM-MST-2D Manual

7 Januar 2025

Smart-AVI SM-DVN-84X Manual

7 Januar 2025

Smart-AVI HDN-4PLUS-S Manual

28 December 2024

Smart-AVI SX-RX200S Manual

28 December 2024

Smart-AVI RK-DVX2U-A-RX8S Manual

28 December 2024

Smart-AVI RK-DVX2U-A-RX4S Manual

28 December 2024

Smart-AVI SX-RX500S Manual

28 December 2024

Smart-AVI SDX-PLUS-RX Manual

28 December 2024

Smart-AVI HDN-8P Manual

28 December 2024

Smart-AVI HDMV-PLUS Manual

25 December 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025