Sonance SS4 Manual

Sonance Skifte SS4

Læs gratis den danske manual til Sonance SS4 (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 92 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 46.5 anmeldelser. Har du et spørgsmål om Sonance SS4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: Read all of these instructions before you operate and
save instructions for later use.
1. Read Instructions - all the safety and operating instructions should be read
before the appliance is operated.
2. Retain Instructions - The safety and operating instructions should be
retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
5.Water and Moisture- The appliance should not be used near water - for
example, near a bathtub,washbowl, kitchen sink, laundry tub,in a wet
basement,or near a swimming pool, and the like.
6. Carts and Stands - The appliance should be used only with a cart or stand
that is recommended by the manufacturer. An appliance and cart
combination should be moved with care. Quick stops, excessive force,and
uneven surfaces may cause the appliance and cart combination to overturn.
7.Ventilation - The appliance should be situated so that its location or position
does not interfere with its proper ventilation. For example,the appliance
should not be situated on a bed, sofa, rug, or similar surface that may block
the ventilation openings; or, placed in a built-in installation,such as a
bookcase or cabinet that may impede the flow of air through the ventilation
openings.
8. Heat - The appliance should be situated away from heat sources such as
radiators,heat registers,stoves,or other appliances (including amplifiers)
that produce heat.
9. Cleaning - The appliance should be cleaned only as recommended by
the manufacturer.
10. Object and Liquid Entry - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
11. Damage Requiring Service - The appliance should be serviced by qualified
service personnel when:
A. Objects have fallen or liquid has been spilled into the appliance; or
B. The appliance has been exposed to rain; or
C. The appliance does not appear to operate normally or exhibits a marked
change in performance; or
D. The appliance has been dropped or the enclosure damaged.
12. Servicing - The user should not attempt to service the appliance beyond
that described in the operating instructions. All other servicing should be
referred to qualified service personnel.
I N S T A L L A T I O N I N S T R U C T I O N S
S S 4 V C / S S 6 V C
PN.33-2900 11.02
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. THE APPARATUS SHALL NOT
BE EXPOSED TO DRIPPING OR SPLASHING. NO OBJECTS FILLED WITH
LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
INTRODUCTION
Thank you for purchasing the Sonance Speaker Selector System.You
have purchased one of the highest performance speaker switching
devices available, carefully designed to give you years of trouble-free
operation. Connection to your system is very simple. Please invest a
few minutes to read the complete instructions,before beginning your
wiring to assure the highest quality sound from your system.
UNPACKING
Save your carton and the styrofoam inserts for future safe transport
in case you move or the unit ever requires shipping for repair.
Before you proceed, find the serial number which is located on the
rear panel of the unit and note it here for future reference.
Serial # ________________________________________
SS4VC/SS6VC BASIC CONCEPT
The SS4VC and SS6VC are designed to connect four and six pairs of
loudspeakers, respectively, to one receiver or amplifier. Each pair of
speakers can be independently turned on/off. The volume control
knobs give you independent volume control in all speaker locations.
These systems provide impedance protection whenever its
protection circuit is manually engaged by the user. When engaged,
the SS4VC and SS6VC adjust the impedance load presented to the
receiver or amplifier. With most amplifiers, when multiple speakers
are engaged, the protection switch should be engaged. With high
amplifier volume, your SS4VC and SS6VC switcher may become
warm. Do not operate your system below the impedance rating of
the receiver, amplifier, or the switcher. Check the owner’s manual of
your receiver or amplifier. Do not exceed the 75Watt RMS rating of
the SS4VC/SS6VC.
USING THE PROTECTION SWITCH
As a general rule, the more speaker pairs you have on, the more the
protection circuitry will be needed. L
eavin h rotectio witchg t e P n s
alway ngages e d (“on” positio il rovid h fes pen) w l p e t e sa t o rating
condition for your receive mpli er.r or a fi For most receivers or
amplifiers, the Protection switch should be engaged when more
than one Speaker button is engaged on the SS4VC and SS6VC
switchers. Failure to engage the Protection switch when multiple
pairs of speakers are engaged may cause damage to your receiver or
amplifier.The protection switch is located on the back of the SS4VC
and SS6VC switchers.Slide the red switch towards the left to engage
the 3Ωprotection resistors. Slide the red switch towards the right to
disengage the resistors and turn off the protection circuit.
NOTE: When protection circuitry is engaged, there may be a slight,
but perceivable loss of volume in the speakers that are engaged.This
is simply the trade-off for using resistive protection instead of
individual amp channels for each speaker pair or an impedance
matching device such as the Sonance AF8. Use dedicated amplifiers
if you require more dynamic range.
CUSTOM BUTTON LABELS
Sonance makes multi-room sound distribution even more user-
friendly by including Custom Button Labels (Sonance PN.33-1468).
You can customize your SS4VC or SS6VC with a label for each button
that corresponds with the room or area in which you have a pair of
speakers playing. One sheet of button labels contains 120 pressure-
sensitive labels, each with a 3 to 7-letter abbreviation for nearly
every room or area likely to be encountered in your installation.
Each label fits the dimensions of the indentations under the buttons
on your SS4VC and SS6VC. A legend of the rooms or areas is
included in the package for easy reference.Consult your Authorized
Sonance Dealer for more information.
SS4VC/SS6VC

Produkt Specifikationer

Mærke: Sonance
Kategori: Skifte
Model: SS4

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonance SS4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skifte Sonance Manualer

Sonance

Sonance SS4 Manual

8 Januar 2025

Skifte Manualer

Nyeste Skifte Manualer

Lancom

Lancom GS-2412 Manual

4 April 2025
Lancom

Lancom GS-2412P Manual

4 April 2025
Lancom

Lancom GS-2426 Manual

4 April 2025
Hager

Hager ARF970D Manual

3 April 2025
Hager

Hager ARF920D Manual

3 April 2025
Roline

Roline 14.01.3579 Manual

2 April 2025
Fantini Cosmi

Fantini Cosmi B12BN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12DN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12GN Manual

1 April 2025
Fantini Cosmi

Fantini Cosmi B12HN Manual

1 April 2025