Sonneman Stix 2789.16 Manual

Sonneman lampe Stix 2789.16

Læs gratis den danske manual til Sonneman Stix 2789.16 (2 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Sonneman Stix 2789.16, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1 of 2

February 13, 2017

LED Product Information and Warnings

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

• Please read all included assembly instructions and warnings carefully before installation. Contact

Customer Service if you have any questions or concerns. Before installation, please conrm that the xture

is compatible with your supply voltage and dimming system, if present.

• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory

sealed compartments, and avoid touching the LEDs with your hands or any object.

• Although all our xtures are equipped with protective devices, LED xtures are vulnerable to power surges

and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC

systems.

• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not

replace or substitute with another power supply.

• Remote LED Driver or Transformer installation must be done by a licensed electrician and in accordance

with local codes. Remote installations should be in an accessible location, as close to the xture as possible.

• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or

wire them in series.

• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built,

and improper connections may damage the xture.

• The ends of coaxial pendant cords have been precisely stripped and split at the factory and must not be

eld cut. Excess cord or cable should be neatly coiled and reserved in the xture canopy.

• Any mounting hardware is provided for your convenience and should be used with discretion. Always use

the appropriate hardware for the mounting surface.

2 of 2

February 13, 2017

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Stix Series - 19" Square LED Pendant, 24" Square LED Pendant,

30"x6" Rectangle LED Pendant, 47"x9" Rectangle LED Pendant

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Determine the height at which the xture is to be hung. Use the

screwdriver (B) to loosen the set screw (C). Adjust the power cord (D) to the

desired length. Tighten the set screw to set.

3. Adjust the steel cables (E) to the desired length. To shorten the cable, push the

cable up and it will be locked automatically. To lengthen the cable, lift up

on the cable and push up on the lock (F). While keeping the lock depressed,

lower the cable to the desired length. Release the lock to set (Fig. 1).

4. Reserve extra power cord (D) and steel cables (E) in the canopy (G),

and adjust the cable stops (H) so they are 12" from the canopy by

loosening the screws and sliding the stops along the cable.

Tighten the screws to secure safety cable (Fig. 2).

5. Attach mounting plate (J) to the outlet box (A). Secure with

outlet box screws (K).

6. Make appropriate electrical connections using wire nuts:

a. Connect the LED driver’s (L) live wire (black) to the live outlet box wire.

b. Connect the LED driver’s (L) neutral wire (white) to the neutral

outlet box wire.

c. Connect the xture’s ground wire (green or uncoated) to the

ground outlet box wire. If not ground is present in outlet box,

connect xture’s ground wire to the mounting plate (J) using

the green screw (included).

d. Carefully place connections in outlet box (A).

7. Install the canopy (G) to mounting plate (J) by inserting the pins (M) on

the canopy into slots (N) on the mounting plate. Slide the canopy to

the side to lock.

8. Slide the cable guide (P) to desired position by using screw driver or Allen

key to loosen the set screw and tighten it to set.

NOTE: Angle of cables and cords should not exceed 45° from the vertical.

9. Restore power to the xture.

Note

• This xture is dimmable with Electronic Low Voltage (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type

dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

2786, 2787, 2788, 2789

2786

2787 2788

2789

Fig. 2

Fig. 1

Produkt Specifikationer

Mærke:	Sonneman
Kategori:	lampe
Model:	Stix 2789.16

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonneman Stix 2789.16 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

lampe Sonneman Manualer

Sonneman Ray 2036 Manual

2 April 2025

Sonneman Nebula 2067.25 Manual

12 September 2024

Sonneman Stix 2789.16 Manual

12 September 2024

lampe Manualer

Nyeste lampe Manualer

NUVO Arabel 60/6967 Manual

4 April 2025

NUVO Gotham 60/191 Manual

4 April 2025

NUVO Cordello 60/7884 Manual

4 April 2025

NUVO Clarksville 60/8061 Manual

4 April 2025

NUVO Gotham 60/190 Manual

4 April 2025

Integral LED ILSTRGBWB028E Manual

4 April 2025

Trust Shyne 25483 Manual

3 April 2025

Trust Vybz GXT 904 Manual

3 April 2025

Schonbek Priscilla BC7106N-48PBZ Manual

2 April 2025

Bresser BR-7RGB Mini Tube Manual

2 April 2025