Soundcore P25i Manual

Soundcore Hovedtelefon P25i

Læs gratis den danske manual til Soundcore P25i (3 sider) i kategorien Hovedtelefon. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Soundcore P25i, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

APP

Download the soundcore app to experience the full range of features such as gaming mode, Find Device, EQ tuning, ﬁrmware updates, and more.

If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.

Click this link to download: http://dl-soundcore.soundcore.com/qcdl?ﬂow=soundcore

WEARING

Choose the ear tips that ﬁt your ears best.

CHARGING

• Fully dry off the earbuds and the USB-C charging port before charging.

• Fully charge both the earbuds and the charging case before the ﬁrst use.

1. Tear off the insulation sticker on the earbuds before ﬁrst use.

2. Place the earbuds in the charging case and close it.

3. Connect the charging case to the power supply by using a certiﬁed USB-C charging cable.

POWERING ON & PAIRING

Open the charging case and take the earbuds out of the case. They will automatically power on and enter Bluetooth pairing mode.

Select soundcore R50i / P20i / P25i * on your device's Bluetooth list when connecting for the ﬁrst time soundcore.

*The device name may vary depending on the region.

MANUAL PAIRING

To manually enter Bluetooth pairing mode, take the earbuds out of the case, then tap and hold the touchpads on both earbuds for 3 seconds.

CONTROLS

*You can also customize controls in the soundcore app.

TWS mode Mono mode

Play / Pause Tap twice (R) Tap twice

Previous track Tap and hold for 2 seconds (L) /

Next track Tap and hold for 2 seconds (R) /

Answer / End a call Tap twice (L/R) Tap twice

Reject a call Tap and hold for 2 seconds (L/R) Tap and hold for 2 seconds

Activate voice assistant software Tap twice (L) /

POWERING OFF

To power off, return the earbuds to the charging case and close it.

The earbuds will automatically power off after 30 minutes if they are not connected.

RESET

Reset if the earbuds have issues pairing with each other or with other devices.

Delete the pairing history from your Bluetooth device ﬁrst. Take the earbuds out of the case. Within one minute of the earbuds powering on, tap and hold the

touchpads on both earbuds for 10 seconds until you hear a notiﬁcation sound.

LED LIGHT GUIDE

Flashing white

Steady white

FIRMWARE UPDATE