SoundTube SM890i-WX Manual

SoundTube Højttaler SM890i-WX

Læs gratis den danske manual til SoundTube SM890i-WX (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om SoundTube SM890i-WX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Box contents

1 Speaker

1 Terminal weather boot

1 Mounting bracket

1 Safety cable

1 Euroblock connector

1 5 mm Allen hex key

1 Paint mask

SM890i and SM890i-WX UL listed 1480 UEAY

Install Instructions For:

SM890i and SM890i-WX

1.435.647.9555

| | 800.647.TUBE

www.soundtube.com

Clamp knob

Mounting bracket

Tap switch

Do not spec or install speaker near support beam, ventilation duct

or other structure that may interfere with speaker function or

dispersion.

Warning Warning

SoundTube speakers must be installed by a professional audio installer/contractor. For safety

and for optimum audio performance, installer must follow all directions issued by SoundTube

Entertainment.

Grille

Grille retention knob

Terminal weather boot

Euro block

Signal wire

SM890i

Rotatable horn

3. To replace horn assembly,

insert horn 1/8 turn from nal

position and rotate clockwise to

tighten. Horn is fully engaged

when horn bae throat is aligned

with speaker.

4. Attach grille by pressing down

gently and rotating the retention

knob clockwise to vertical postion.

Grille retention knob will snap into

the matching recess in the grille

when fully engaged.

2. To release the horn, insert

hand into horn throat and twist

horn assembly counter-clockwise.

1. To remove the grille, rotate

the grille retention knob

counter-clockwise while gently

pushing down on the grille.

Remove the grille from the

speaker by pulling gently on the

grille retention knob.

The SM890i has a rotatable horn for 85° or 110° coverage.

Speaker ships in the 110º vertical (85º horizontal) position. To change to

85º vertical (110º horizontal), follow these directions:

110º

100v 70v 25v

6 Direct Direct Direct

5 X 150 19

4 150 75 10

3 75 38 5

2 38 19 2.5

1 19 10 1.3

Tap Setttings

85º 110º

85º

1. Unpack speaker and

mounting hardware.

5. Slip terminal weather boot

over signal wire. For environ-

mental applications, put

sealant around nipple and base

when installation is complete.

2. Choose a secure mounting

surface with sucient strength

to reliably hold the speaker.

Mounting bracket accom-

modates screwing, through-

bolting and strapping

installation options.

4. Thread safety cable

(included) through mounting

screw and securely fasten

mounting plate to surface

(user must supply fasteners).

Mounting bracket may also

be strap-mounted to pole or

appropriate anchor point.

The max. strap width is

0.5 in / 12.7 mm.

7. Insert four-pin Euroblock

connector into jack on rear of

speaker. Connectors are keyed

for polarity.

9. Select the desired setting

on the rear-mounted tap switch.

Use table on page 1 to choose

appropriate tap number based on

system voltage, and desired power

draw.

6. Connect signal wire to

four-pin Euroblock plug. Use

inside positive and negative

inputs for signal wire input.

For daisy chaining, use outside

positive and negative terminals

to connect additional speakers.

Tighten unused terminal screws.

10a. When mounting the

speaker, ensure that the

mounting rod in the speaker

securely engages with the

mounting prongs on the bracket

arm.

8. Clip snap-link safety cable to

eyebolt on back of cabinet.

Install Instructions For:

SM890i and SM890i-WX

1.435.647.9555

| | 800.647.TUBE

www.soundtube.com

11. Position speaker at the

desired angle and secure with

the clamp knob. As a security

feature, an included 5 mm

Allen hex key is required for

loosening the clamp knob and

readjusting the speaker position

angle.

12. Done!

3. For proper bracket and

plate orientation, pay special

attention to the prongs on the

bracket arm and ensure that

they point toward the direction

of the desired speaker position.

Vertical

Speaker

Horizontal

Speaker

10b. When properly inserted,

bracket arm prongs will be fully

engaged with the mounting rod

in the speaker cabinet.

Strap mount

location x4

SM890i

Produkt Specifikationer

Mærke:	SoundTube
Kategori:	Højttaler
Model:	SM890i-WX

Har du brug for hjælp?

Hvis du har brug for hjælp til SoundTube SM890i-WX stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler SoundTube Manualer

SoundTube FP6030-II Manual

20 Februar 2025

SoundTube SM890i-WX Manual

28 Januar 2025

SoundTube XT850-SUB Manual

28 Januar 2025

SoundTube XT850-LED Manual

28 Januar 2025

SoundTube SM82-EZ-II-WX Manual

28 Januar 2025

SoundTube SS30 Manual

24 Januar 2025

SoundTube SM590i-II Manual

24 Januar 2025

SoundTube RS82-EZ Manual

24 Januar 2025

SoundTube RS400i Manual

24 Januar 2025

SoundTube SM400i Manual

24 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer

MB Quart NF1-116SB Manual

18 Juni 2025

Sogo SS-8586 Manual

17 Juni 2025

MB Quart NK2-116W Manual

17 Juni 2025

MB Quart NF1-116SW Manual

17 Juni 2025

Sogo SS-8585 Manual

17 Juni 2025

MB Quart NHT1-120BPR Manual

17 Juni 2025

DS18 PRO-X8.4RGBCAP Manual

17 Juni 2025

Sogo SS-8590 Manual

17 Juni 2025

Sogo SS-8790 Manual

17 Juni 2025

DS18 Hydro NXL-8M Manual

17 Juni 2025