SoundTube RF31-EZ-T Manual

SoundTube Højttaler RF31-EZ-T

Læs gratis den danske manual til SoundTube RF31-EZ-T (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 2 anmeldelser. Har du et spørgsmål om SoundTube RF31-EZ-T, eller vil du spørge andre brugere om produktet?

Side 1/2
Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Warning Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Grille
Grille safety clip
Screws
Speaker
Two-gang junction box (installer supplied)
NOTE: the RF31-EZ-T is designed to install
into a standard 2-gang junction box.
before installing the junction box.
Paint mask
Box contents
1 Speaker
1 Grille
1 Paint mask
4 Mounting screws
© 2010 SoundTube Entertainment, Inc. All rights reserved. PN INS-RF-31-T Rev 09.7.10
Optional Accessories
Theft-resistant, stainless steel
grille (AC-RF31-TRG)
Install Instructions For:
RF31-EZ-T speaker
RF31-EZ-T
1. Unpack speaker.
RF31-EZ-T
Installation Instructions For:
RF31-EZ-T speaker
1.435.647.9555
| | 800.647.TUBE
www.soundtube.com
1.
2.
5. Attach grille safety clip
by placing the large end of
the clip over snap-fit post
(1), then sliding clip until
small end snaps into place
around post (2).
2. Connect signal wires to
speaker using terminal
block. Connect - wire to "C".
Connect + wire according
to step 2a.
3. Install the RF31-EZ into
the installer-supplied
junction box using included
fasteners. Note: for best
performance, make sure
that junction box is well
sealed.
7. Done!
2a. Terminal Settings
Terminal
Ground
Ground
Ground
C
1
2
3
4
100v
70.7v
25v
X
10w
5w
2.5w
10w
5w
2.5w
1.3w
1.3w
0.7w
0.4w
0.2w
6. Align tabs on snap-fit
grille with slots in baffle,
gently press grille into place.
4. If space isn't yet finished,
apply paint mask to protect
RF31. Remove when finish
work is complete.


Produkt Specifikationer

Mærke: SoundTube
Kategori: Højttaler
Model: RF31-EZ-T

Har du brug for hjælp?

Hvis du har brug for hjælp til SoundTube RF31-EZ-T stil et spørgsmål nedenfor, og andre brugere vil svare dig