
S- Installation, Operation & Maintenance Instructions3011
Polished chrome plated ANYSTREAM
S-3011 Showerhead with a 4-1/2” outer spray adjustment ring. 5 self-
cleaning plunger nozzles resist scale bui - spray streams for a full body coverage pattern. The ld up and provide 45
center core nozzle delivers twelve massaging jets and a combination spray is included. Water conserving pressure
compensating AUTOFLO® device reduces ow to 2.5 GPM/9.46LPM maximum, to meet existing ANSI A112.18.1
FLOW RATE: 2.5 GPM/9.46LPM MAXIMUM
SHIPPING WEIGHT: 1.0 LBS.
Remove the old shower head from the shower arm. Clean o any debris on the threads of the shower arm. Wrap
Teon tape around the shower arm threads in a clockwise direction. Turning in a clockwise direction, screw the new
Speakman shower head onto the shower arm. Tighten with a wrench. Turn the water supply on and check for leaks.
To adjust the spray pattern of the shower head, simply rotate the outer ring to the desired spray (Full-Body, Dual
action or Massage). The outer ring can rotate 360°.
The gleaming nish of your SPEAKMAN ANYSTREAM
shower head can be cleaned by using mild soap and warm
water. Dry immediately with a soft, clean cloth for best results. The ow control device limits water ow to 2.5 gallons
per minute. The small orices may become clogged with scale and other minerals found in potable water. To clean
the flow regulator, simply remove the shower head from the bent arm, dislodge the flow regulator which is located in
the inlet and clean as necessary.
S- -E2 3011 –Low Flow Showerhead
S- - -E2 3011 BN –Low Flow Brushed
dimensional changes without
S
S
S
SSP
P
P
PPE
E
E
EEA
A
A
AAK
K
K
KKM
M
M
MMA
A
A
AAN
N
N
NN
PO Box 191 Wilmington, DE 19899 Phone: 800- -2107 Fax: 800- - 537 977 2747
Visit us on the web at www.speakmancompany.com