Speco Technologies CVC-647TP Manual


Læs gratis den danske manual til Speco Technologies CVC-647TP (4 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Speco Technologies CVC-647TP, eller vil du spørge andre brugere om produktet?

Side 1/4
P. 1
CVC-647TP
Vandal Resistant Dome
Camera Instructions
CONTENTS
Page Page
1. DESCRIPTION…… ........ 1
2. INSTALLATION………… .... 2
3.WIRING INSTRUCTIONS ... 3
4. SPECIFICATIONS .............. 4
1. DESCRIPTION
Thank you very much for purchasing our product.
This Tamper Resistant Color Dome Camera uses a SONY Super-HAD
CCD Image Sensor and solid-state circuitry, which provides long life and
high reliability. This CVC-647TP offers excellent image quality with low
lag and high burn resistance, and is not subject to distortions from
magnetic fields. Highly resistant to shock and vibration, and easy to install,
this Camera is a very good choice for your CCTV system.
P. 2
2. INSTALLATION
STEP 1: Please select the most suitable position on the ceiling to install
the camera.
STEP 2: Remove the locking screw and rotate the dome housing
counterclockwise to remove it from the mounting base (as shown
by the figure below).
Mount i ng Bas e
DOME Hous i ng
OR
STEP 3: Hold the mounting base against the ceiling and center it over the
cable hole. Attach to the ceiling using the four screws supplied in
the accessory package (shown by the figure below).
Then allow the cable connectors to pass through the cable entry
hole made available for that purpose (shown by figure below).


Produkt Specifikationer

Mærke: Speco Technologies
Kategori: Overvågningskamera
Model: CVC-647TP

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies CVC-647TP stil et spørgsmål nedenfor, og andre brugere vil svare dig