Speco Technologies O2T7 Manual

Speco Technologies Overvågningskamera O2T7

Læs gratis den danske manual til Speco Technologies O2T7 (21 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Speco Technologies O2T7, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/21

O2T7 User’s Manual

Network Camera Manual

(O2T7)

O2T7 User’s Manual

Rev 1.0 (May. 2017)

Note

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into and outlet on a circuit different from that to which the receiver is

connected

 Consult the dealer or an experienced radio/TV technician for help.

Be careful not to cause any physical damage by dropping or throwing the camera. Especially keep the

device out of reach from children.

Do not disassemble the camera. No after service is assumed when disassembled.

Use only the power adapter provided with the camera.

Be careful to prevent moisture or water penetration into the unit. Attention is needed when installing the

camera. The screw holes for the installation screws and pipe should be maintained water tight during the

whole life time of the product.

All of the electrical connection wires running into the unit should be prepared so that water from the outside

cannot flow into the unit through the surface of the wires. Penetration of moisture through the wire for an

extended period can cause malfunction of the unit or deteriorated image.

Produkt Specifikationer

Mærke:	Speco Technologies
Kategori:	Overvågningskamera
Model:	O2T7

Har du brug for hjælp?

Hvis du har brug for hjælp til Speco Technologies O2T7 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Speco Technologies Manualer

Speco Technologies O5LB1 Manual

12 Januar 2025

Speco Technologies O8B7M Manual

11 Januar 2025

Speco Technologies O2VLB7 Manual

3 September 2024

Speco Technologies VLDT3GM Manual

20 August 2024

Speco Technologies CVC624WDR Manual

19 August 2024

Speco Technologies O4iB2M Manual

18 August 2024

Speco Technologies ZIPTW4B1 Manual

18 August 2024

Speco Technologies O2ID21M Manual

17 August 2024

Speco Technologies Intensifier 2 CVC6246iHR Manual

17 August 2024

Speco Technologies O4DT1 Manual

17 August 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

I-PRO WV-X67301-Z4L3 Manual

17 Juni 2025

I-PRO WV-X15501-Z1LN Manual

17 Juni 2025

Hama 176613 Manual

17 Juni 2025

Kogan KAODPNTSP2D Manual

17 Juni 2025

I-PRO WV-X15501-Z3LN Manual

17 Juni 2025

I-PRO WV-X15302-Z1LN Manual

17 Juni 2025

I-PRO WV-X15302-Z1L Manual

17 Juni 2025

I-PRO WV-X15301-Z1LN Manual

17 Juni 2025

I-PRO WV-S15501-Z1LN Manual

17 Juni 2025

Hama 176576 Manual

17 Juni 2025