SSV Works BR-DS10U Manual


Læs gratis den danske manual til SSV Works BR-DS10U (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om SSV Works BR-DS10U, eller vil du spørge andre brugere om produktet?

Side 1/5
BR-DS10U
2021-Up Ford Bronco
Subwoofer Enclosure, 10” - Unloaded
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or
workmanship. All SSV Works Electronics are covered by a limited 1 year warranty against defects in
material or workmanship. All SSV Works Speakers are covered by a limited 1 year warranty against
defects in material or workmanship. Labor for replacement of defective components is not covered.
Contact SSV Works for further warranty information.
BRONCO SUB WOOFER ENCLOSURE PARTS LIST
PARTS LIST IMAGES
Body Bracket, 4-Door, Soft Top
[B-MB3145]
Bronco Sub Enclosure
Lower Housing Bracket
[B-MB3142]
Body Bracket, 4-Door, Hard
Top [B-MB3144]
Upper Housing Bracket
[B-MB3141]
TOOLS NEEDED FOR INSTALLATION - T30 Torx Wrench
BRONCO SUBWOOFER ENCLOSURE ASSEMBLY
A. Attach the upper and lower housing brackets to the subwoofer
enclosure using (10) M6x1x16mm screws and washers.
2
- Phillips Screw Driver
B. Install the subwoofer and grill using (18) #7x1.25” screws included
in the kit. Note that the subwoofer enclosure is mounted in the
vehicle vertically. Align the subwoofer and grill logo accordingly.
BA
Hardware Pack
[B-HP3146]
Spacer [B-MB3143]
Hardware Pack, #7x1.25(x8)
[B-HP#7-8]


Produkt Specifikationer

Mærke: SSV Works
Kategori: Ikke kategoriseret
Model: BR-DS10U

Har du brug for hjælp?

Hvis du har brug for hjælp til SSV Works BR-DS10U stil et spørgsmål nedenfor, og andre brugere vil svare dig