Stanley FatMax FMCL001B Manual

Stanley Lys FatMax FMCL001B

Læs gratis den danske manual til Stanley FatMax FMCL001B (31 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Stanley FatMax FMCL001B, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/31
www.stanley.eu
1
2
4
3
FMCL001B
3
ENGLISH
(Original instructions)
2
4
4a
4
4
5
5a
Intended use
Your Stanley FatMax™ FMCL001B work light has been
designed for providing illumination and should only be used
for emergency lighting purpose. This appliance is intended for
professional and private, non professional users.
Warning! This torch is not suitable for household room
illumination.
Safety instructions
General power tool safety warnings
@
Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery oper-
ated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust.
Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs
and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. The light source of this luminaire is not replaceable.
When the light source reaches its end of life the whole
luminaire shall be replaced.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the inuence
of drugs, alcohol or medication.
A moment of inattention while operating power tools may
result in serious personal injury.
b. Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
c. Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
A
B
C
D
3
E
F

Produkt Specifikationer

Mærke: Stanley
Kategori: Lys
Model: FatMax FMCL001B

Har du brug for hjælp?

Hvis du har brug for hjælp til Stanley FatMax FMCL001B stil et spørgsmål nedenfor, og andre brugere vil svare dig


Lys Stanley Manualer

Stanley

Stanley FatMax FMCL001B Manual

1 Oktober 2025
Stanley

Stanley Fatmax SFMCL020 Manual

6 Juli 2025
Stanley

Stanley 95-155 Manual

1 Oktober 2023

Lys Manualer

Nyeste Lys Manualer

BeamZ

BeamZ BMS24 Manual

2 Oktober 2025
Hedler

Hedler Profilux LED1400 Manual

2 Oktober 2025
BeamZ

BeamZ IGNITE740 Manual

2 Oktober 2025
BeamZ

BeamZ Cobra 160 Manual

2 Oktober 2025
Innr

Innr RB 250 C-2 Manual

2 Oktober 2025
BeamZ

BeamZ Cobra 720 Manual

2 Oktober 2025
BeamZ

BeamZ NUKE1 Manual

2 Oktober 2025
Hama

Hama 00021571 Manual

2 Oktober 2025
BeamZ

BeamZ Cobra 100R Manual

2 Oktober 2025
BeamZ

BeamZ Magic Jelly DJ Ball 153.219 Manual

2 Oktober 2025