StarTech.com 424DUK-USB-C-CHARGER Manual

StarTech.com Batterioplader 424DUK-USB-C-CHARGER

Læs gratis den danske manual til StarTech.com 424DUK-USB-C-CHARGER (3 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om StarTech.com 424DUK-USB-C-CHARGER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

For additional self-service support options and community forums, please visit: www.StarTech.com/support

Revision: October 8, 2024

Quick-Start Guide

Product ID

424Dxx-USB-C-CHARGER

Rear View

Bottom View (Mounting Plate Removed)

4-Port 240W GaN USB-C Laptop Charger, Desktop/Under Desk Mount

*Product may vary from image

140W 140W

240W

Quick-Start Guide

Feature Function

1USB Type-C Charging Ports x 4

• supports up to 140WLocking USB Type-C Ports

• Supported power proles: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A, 28V 5A

(140W Max)

• (PPS) Mode: 5 - 11V 5A (45W Max)Programmable Power Supply

Note: Refer to the Power Behavior table for power allocation among ports.

2Mounting Plate • Enables fastening of the onto the Mounting Plate 4-Port Charger

3Mounting Plate, Desk Mounting Holes x 4

• Enables fastening of the under a desk or onto a wallMounting Plate

• compatible 100x100mmVESA

4Security Slots

• Enables securing of the with a 4-Port Charger Laptop Cable Lock

• Compatible with ano, Noble edge®, and -slot security slotsN W K

5AC Power Input • Use to provide power with the included IEC-C5 Power Cord

6Anti-Slip Rubber Pads • Help prevent the from sliding when placed on a surface4-Port Charger

7Mounting Plate, Mounting Holes x 4

• Enables fastening of the onto the with Mounting Plate 4-Port Charger

the included M3 Phillips Countersunk Machine Screws

• are spaced 40mmMounting Holes

• The mounting pattern is compatible with StarTech.com’s Docking

Station VESA Mount Plates

Package Contents

• Charger ( ) x1A

• Mounting Plate (Installed) ( ) x 1B

• M3x4mm (5/32”) Phillips Countersunk Machine Screws (Installed) ( ) x 4C

• M4x12mm (1/2”) Phillips Countersunk Wood Screws ( ) x 4D

• M4x20mm (3/4”) Phillips Countersunk Wood Screws ( ) x 4E

• ( ) S2CEPR3M-USBSL-CABLE ( ) x 2Only for 424D3x-USB-C-CHARGER F

• 6ft IEC-C5 Power Cord ( ) x 1 G

Requirements

For the latest manuals, product information, technical specications, and declarations of conformance, please visit:

www.StarTech.com/support

• Phillips head screwdriver

• (Optional) Appropriate mounting hardware and tools for the wall type

• (Optional) Power drill with an appropriate drill bit according to the wall type

• (Optional) Pencil or marker

• (Optional) Bubble level

• (Optional) Laptop Cable Lock

Warnings!

• StarTech.com Ltd. is not responsible for any property damage and/or personal injury resulting from the installation procedures

outlined in this technical document.

• The mounting instructions and/or hardware included with this product may not be suitable for the specic wall structure used.

If you lack the necessary expertise required to attach this product to the wall structure or to assess the suitability of the hardware

provided, please contact a professional installer.

• Read the entire Quick-Start Guide and ensure the instructions are fully understood before using this product.

• Never operate this product if parts are missing or damaged.

• Do not touch the product under power if the product has an exposed printed circuit board or electrical wire.

Over Temperature Protection

Over Temperature Protection (OTP) has been implemented to prevent the unit from overheating in abnormal scenarios.

OTP activation is based on the transformer temperature and will reduce the aggregate power from 240W to a lower level to

ensure that the device stays within safe operating limits. Following an OTP trigger and sucient cooling time, the connected

device(s) should be hot-plugged to reset the power prole allocation.

Operational Notes

• It is recommended to keep the bracket always installed to ensure optimal thermal performance of the unit via the

additional clearance and airow that the bracket provides.

• It is recommended to install the unit in a well-ventilated area, away from other sources of signicant heat.

• If there are multiple units, they should NEVER be stacked on top of each other.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Batterioplader
Model:	424DUK-USB-C-CHARGER

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com 424DUK-USB-C-CHARGER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Batterioplader StarTech.com Manualer

StarTech.com 424DUK-USB-C-CHARGER Manual

14 Juli 2025

StarTech.com 424DAU-USB-C-CHARGER Manual

20 Februar 2025

StarTech.com 424DEU-USB-C-CHARGER Manual

20 Februar 2025

StarTech.com 160W-POWER-ADAPTER Manual

15 December 2024

StarTech.com WCH1C Manual

21 September 2024

Batterioplader Manualer

Nyeste Batterioplader Manualer

Alogic PAW8PM067 Manual

14 Juli 2025

Alogic QC10RCMBK Manual

14 Juli 2025

Alogic Magspeed MSP31CS15WAU Manual

14 Juli 2025

Recom T12 Power Tester Manual

10 Juli 2025

Xiaomi Mi 65W Fast Charger with GaN Tech Manual

9 Juli 2025

Dedra DED7038V Manual

9 Juli 2025

Kenwood KSC-25S Manual

9 Juli 2025

Dometic SinePower DPSI412 Manual

9 Juli 2025

Kenwood KSC-48CR Manual

8 Juli 2025

Sony BC-ZD1 Manual

8 Juli 2025