StarTech.com ET1000S40LC2 Manual

StarTech.com Netværkskort/adapter ET1000S40LC2

Læs gratis den danske manual til StarTech.com ET1000S40LC2 (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om StarTech.com ET1000S40LC2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 03/03/2016

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x Fiber Media Converter

• 1 x Universal Power Adapter

• 3 x Power Adapter Plug (NA/ UK/ EU)

• 1 x Instruction Manual

System Requirements

• 1000BASE-T compatible Ethernet network equipment

• RJ45 terminated UTP Cat5e or better Ethernet cable

• 1000BASE-LX/SX compatible ber optic network equipment

• LC/SC terminated single mode 9/125 μm ber optic cable

• Available AC electrical outlet

ET1000S40LC2 / ET91000SM402

Gigabit Ethernet to Single Mode LC/SC Fiber Media Converter - 40 KM

Installation

1. Make sure the DIP switches are set appropriately for your

network conguration (see “DIP Switch Settings“ section

for details).

2. Connect the ber optic network cable from a computer/

switch/media converter to the LC connector on the

media converter.

NOTE: When connecting the ber cable, make sure to

connect the Tx (transmit) terminal on one end, with the Rx

(receive) terminal on the other end.

3. Connect a UTP Ethernet cable, from a computer/switch to

the RJ45 jack on the media converter.

4. Connect the power adapter to the media converter.

5. The following example illustrates the connection scheme

when connecting from a 1000BASE-T Ethernet port of a

hub/switch to a 1000BASE-SX/LX port of another hub/

switch, through the ber media converter:

6. The following example illustrates the connection scheme

when connecting from a 1000BASE-T Ethernet port on a

hub/switch to a 1000BASE-T Ethernet Network Interface

Card (NIC) in a computer through the ber media

converter:

Dip Switch

LED Indicators

Card Release

Thumbscrew

RJ45 Ethernet

connector

LC Duplex Fiber

connector

ET1000S40LC2 - Front View

ET91000SM402 - Front View

ET1000S40LC2 / ET91000SM402 - Rear View

DC Power connector

Ground point

(optional)

Dip Switch LED Indicators

Card Release

Thumbscrew

RJ45 Ethernet connector

SC Duplex Fiber

connector

DIP Switch Settings

Full/ Half:

Ethernet Duplex mode will be congured for Full or Half.

LFP:

Link Fault Pass-through will pass a link failure to the

Ethernet side, if a link failure is encountered on the ber

side and vice versa. Otherwise, the Ethernet side will

continue to show no link failures, even if the ber side has

no link.

(OFF = Not active, On = Active)

Auto/Force:

Auto negotiate duplex mode, or force Full/Half via DIP switches.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Netværkskort/adapter
Model:	ET1000S40LC2
Vægt:	620 g
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkevægt:	754 g
Pakkedybde:	138 mm
Pakkebredde:	205 mm
Pakkehøjde:	89 mm
Opbevaringstemperatur (T-T):	-10 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Ethernet LAN-porte (RJ-45):	1
Driftstemperatur (T-T):	0 - 60 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Dimensioner (BxDxH):	95 x 160 x 20 mm
Certificering:	CE, FCC
DC-in-stik:	Ja
Udgangsspænding:	12 V
Udgangsstrøm:	1 A
Harmoniseret systemkode (HS):	85176990
Bæredygtighedscertifikater:	RoHS
Intern:	Ingen
Maksimal dataoverførselshastighed:	2000 Mbit/s
Plug and play:	Ja
Fiber optisk strømstik:	LC
Maksimal overførselsafstand:	40000 m
Bølgelængde:	1310 nm
Ekstern strømadapter:	Ja
Fuld duplex:	Ja
Ethernet-grænsefladetype:	Gigabit Ethernet
Gennemsnitstid mellem fejl (MTBF):	65000 t
Auto MDI/MDI-X:	Ja
Fiberkanal porte:	1
Fibertilstandsstruktur:	Enkeltilstand
Duplex system:	Full, Half
Indgående omregner interface:	1000Base-T
Udgående omregner interface:	1000Base-LX, 1000Base-SX