Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support
Manual Revision: September 5, 2024
Product Diagram
O1210I-NETWORK-CARD
Component Function
1Pull Tab • Pull to remove the from the Network Card
OCP NIC 3.0 Slot
2SFP+ Slot x 2
• Connect a orSFP+ Module, Active Optical Cable,
Direct Attach Copper Cable Network Card to the
• Supports 1Gbps and 10Gbps
3Locking Screw • Secure the card to the Host Server Case
44C+ Connector
(OCP NIC 3.0) • Insert into an on the OCP NIC 3.0 Slot Host Server
2-Port OCP 3.0 10G Open SFP+ Network Card - Intel
Package Contents
• Network Card x 1
• Quick-Start Guide x 1
Requirements
For the latest requirements, please visit: www.StarTech.com/O1210I-NETWORK-CARD
• Host server with an available OCP NIC 3.0 Slot
Installation
Install the Server Network Card
WARNING!
Static Electricity can severely damage . Ensure that you are adequately Network Cards
grounded Host Server Case Server Network Card before you open your or touch the .
You should wear an or use an when installing any Anti-Static Strap Anti-Static Mat
computer component. If an isn’t available, discharge any built-up Anti-Static Strap
static electricity by touching a large for several seconds. Only Grounded Metal Surface
handle the by its edges and do not touch the gold connectors.Server Network Card
1. Turn o the and any that are connected to it (e.g. Host Server Peripheral Devices
printers, external hard drives, etc.).
2. Unplug the from the back of the , and disconnect any Power Cable Host Server
Peripheral Devices that are connected.
3. Remove the from the . Consult the documentation that came with Cover Server Case
the for details about doing this safely.Host Server
4. Locate an open and remove the corresponding OCP NIC 3.0 Slot Slot Cover Plate
from the back of the .Host Server
5. Gently insert the into the . Turn the Server Network Card OCP NIC 3.0 Slot Locking
Screw Server Network Card Server Case/Chassisto attach the to the back of the .
6. Return the onto the .Cover Host Server
7. Install one or more , , or SFP/SFP+ Modules Active Optical Cables Direct Attach
Copper Cables SFP+ Slots into the available .
8. Reconnect all of the disconnected in .Peripheral Devices Step 2
9. Reconnect the to the back of the .Power Cable Host Server
10. Turn on the and .Host Server Peripheral Devices
*Product may vary from image
1
3
2
2
4
