StarTech.com OR41GI-NETWORK-CARD Manual

StarTech.com Netværkskort/adapter OR41GI-NETWORK-CARD

Læs gratis den danske manual til StarTech.com OR41GI-NETWORK-CARD (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15 anmeldelser. Har du et spørgsmål om StarTech.com OR41GI-NETWORK-CARD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: May 9, 2024

Product Diagram

OR41GI-NETWORK-CARD

Port/LED/Connector Function

1Pull Tab

• Pull to remove the from the Server Network Card

OCP NIC 3.0 Slot

2RJ45 Port x 4

• Connect a to theNetwork Cable Server Network

Card

• Supports 1 Gbps, 100 Mbps, and 10 Mbps

3LED Indicators

• Left LED Indicator Link Speed is

• Solid Green: 1 Gbps

• Solid Amber: 10/100 Mbps

• Right LED Indicator Link Status is

• Solid Green: Active link

• Flashing Green: Activity

4C+ Connector

(OCP NIC 3.0)

• Insert into an on the OCP NIC 3.0 Slot Host Server

5Locking Screw • Secure the card to the Host Server Case

4-Port RJ45 Gigabit OCP 3.0 Server Network Card

Package Contents

• OCP NIC 3.0 Network Card x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/OR41GI-NETWORK-CARD

• Host server with an available OCP NIC 3.0 slot

Installation

Install the Server Network Card

WARNING!

Static Electricity can severely damage . Ensure that you are adequately Network Cards

grounded Host Server Case Server Network Card before you open your or touch the .

You should wear an or use an when installing any Anti-Static Strap Anti-Static Mat

computer component. If an isn’t available, discharge any built-up Anti-Static Strap

static electricity by touching a large for several seconds. Only Grounded Metal Surface

handle the by its edges and do not touch the gold connectors.Server Network Card

1. Turn o the and any that are connected to it (e.g. Host Server Peripheral Devices

printers, external hard drives, etc.).

2. Unplug the from the back of the , and disconnect any Power Cable Host Server

Peripheral Devices that are connected.

3. Remove the from the . Consult the documentation that came with Cover Server Case

the for details about doing this safely.Host Server

4. Locate an open and remove the corresponding OCP NIC 3.0 Slot Slot Cover Plate

from the back of the .Host Server

5. Gently insert the into the . Turn the Server Network Card OCP NIC 3.0 Slot Locking

Screw Server Network Card Server Case/Chassisto attach the to the back of the .

6. Return the onto the .Cover Host Server

7. Connect one or more to the on the Network Cable/s RJ45 Ports Server Network

Card.

8. Reconnect all of the disconnected in .Peripheral Devices Step 2

9. Reconnect the to the back of the .Power Cable Host Server

10. Turn on the and .Host Server Peripheral Devices

*Product may vary from image

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com

could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of

prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price

paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such

laws apply, the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.

Mesures de Sécurité

• Lisez tout le manuel et assurez-vous que vous comprenez les instructions avant de commencer à assembler et utiliser

ce produit.

安全対策

• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。

Misure di Sicurezza

• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare

questo prodotto.

Säkerhetsåtgärder

• Läs hela manualen och se till att du förstår instruktionerna innan du börjar montera och använda produkten.

Medidas de Seguridad

• Lea todo el manual y asegúrese de haber comprendido bien las instrucciones antes de proceder con el ensamblaje y el

uso de este producto.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

À DÉPOSER

EN MAGASIN

À DÉPOSER

EN DÉCHÈTERIE

Cet appareil,

ses accessoires

et piles

se recyclent

Download the Driver

1. Navigate to www.startech.com/OR41GI-NETWORK-CARD

2. Click the tab.Drivers & Downloads

3. Under , download the .Driver(s) Driver Package

Install the Driver

Windows

1. Right-click the zipped that was downloaded. Click Follow Driver Package Extract All.

the on-screen instructions to extract the les.

Note: Windows usually saves the les to the Downloads folder associated with the user

account (e.g. C:\Users\useraccount\Downloads)

2. Follow the instructions on the accompanying le for further Intel_Windows_DIG

Installation Instructions.

Linux

1. Extract the contents of the . Driver Package

2. Follow the instructions on the accompanying le for further README Installation

Instructions.

Quick-Start Guide

Verify the Driver Installation

Windows

1. Navigate to the .Device Manager

2. Under , right-click Network Adapters Intel(R) I350 Gigabit Network Connection

and click the option.Properties

3. Conrm that the is installed and working as expected.Driver

Linux

Note: Ensure Linux kernel 2.4 (LTS) or higher is being used. Execute the following

command from the terminal prompt to check the kernel version, uname -r.

1. Open a and type the command to Terminal Window sudo dmesg | grep Intel

check the Intel Driver Integration.

2. You should see the following response if the drivers are present, Intel(R) Gigabit

Network Driver.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Netværkskort/adapter
Model:	OR41GI-NETWORK-CARD
Bredde:	132 mm
Dybde:	85 mm
Højde:	15 mm
Vægt:	100 g
Produktfarve:	Black, Green
Pakkevægt:	110 g
Pakkedybde:	207 mm
Pakkebredde:	144 mm
Pakkehøjde:	38 mm
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 90 %
Ethernet LAN-porte (RJ-45):	4
Ethernet LAN:	Ja
Strømforbrug (typisk):	4.65 W
Driftstemperatur (T-T):	5 - 50 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Hurtig installationsvejledning:	Ja
Forbindelsesteknologi:	Ledningsført
Kabelteknologi:	10/100/1000BaseT(X)
Netværksstandarder:	IEEE 802.1AX, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
Servicekvalitet support (QoS):	Ja
LED-indikatorer:	Aktivitet
Bæredygtighedscertifikater:	RoHS
Understøttede Windows-operativsystemer:	Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 IoT Enterprise, Windows 10 Pro, Windows 10 Pro x64, Windows 10 x64, Windows 11, Windows 11 Enterprise, Windows 11 Enterprise x64, Windows 11 Home, Windows 11 Pro, Windows 11 x64
Understøttede Linux-operativsystemer:	Ja
Hovedkassen højde (udvendigt):	320 mm
Hovedkassens længde (udvendigt):	440 mm
Hovedkassens bredde (udvendigt):	420 mm
Værtsgrænseflade:	OCP 3.0
Grænseflade:	Ethernet
Intern:	Ja
Maksimal dataoverførselshastighed:	1000 Mbit/s
Produkter pr. hovedkasse (udvendigt):	40 stk
Fuld duplex:	Ja
Overholdelse af bæredygtighed:	Ja
Ethernet-grænsefladetype:	Fast Ethernet, Gigabit Ethernet
Komponent til:	Server
Understøttede operativsystemer til servere:	Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019, Windows Server 2022
VLAN understøttelse:	Ja
Flowkontrol support:	Ja
Link aggregering:	Ja
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Auto MDIX IEEE:	Ja
Wake-on-LAN klar:	Ja
Chipsæt:	Intel® I350-AM4
PCI version:	3.0