StarTech.com P041GI-NETWORK-CARD Manual

StarTech.com Netværkskort/adapter P041GI-NETWORK-CARD

Læs gratis den danske manual til StarTech.com P041GI-NETWORK-CARD (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om StarTech.com P041GI-NETWORK-CARD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: June 1, 2023

Product Diagram

P041GI-NETWORK-CARD

Port/LED/Connector Function

1 Bracket

• Secures the card to the Host Computer Case

• The Full Prole Bracket comes pre-installed

2 Open SFP Slot x 4

• Add a MSA-Compliant SFP Transceiver Module

• Supports Fiber or Ethernet 1 Gbps SFPs

3 LED Indicators

• Left LED Indicator is Link Speed

• Solid Green: 1 Gbps

• Right LED Indicator is Link Status

• Solid Green: Active link

• Flashing Green: Activity

4 PCIe 2.0 p1-x2 Connector • Insert into a PCI Express Slot on the Host Computer

Package Contents

• Open SFP Network Card x 1

• Quick-Start Guide x 1

4-Port Open SFP Gigabit Network Card

Requirements

For the latest requirements, please visit www.startech.com/P041GI-NETWORK-CARD

• Host computer with an available PCI Express 2.0 or greater slot (x2, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

Static Electricity can severely damage PCI Express Cards. Ensure that you are

adequately Grounded before you open your Host Computer Case or touch the PCI

Express Card. You should wear an Anti-Static Strap or use an Anti-Static Mat when

installing any Host Computer component. If an Anti-Static Strap isn’t available,

discharge any built-up static electricity by touching a large Grounded Metal Surface

for several seconds. Only handle the PCI Express Card by its edges and don’t touch

the gold connectors.

1. Turn o the Host Computer and any Peripheral Devices that are connected to it

(e.g. printers, external hard drives, etc.).

2. Unplug the Power Cable from the back of the Host Computer.

3. Disconnect any Peripheral Devices that are connected to the Host Computer.

4. Remove the Cover from the Host Computer Case. Consult the documentation that

came with the Host Computer for details about doing this safely.

5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate

from the back of the Host Computer Case.

Note: Consult the documentation that came with the Host Computer for details

about doing this safely. This card works in PCI Express x2, x4, x8, or x16 Slots.

6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the

Bracket to the back of the Host Computer Case.

7. Return the Cover onto the Host Computer Case.

8. Insert a compatible 1G SFP Transceiver Module, into the SFP Slot onto the PCI

Express Card.

9. Reconnect the Power Cable to the back of the Host Computer.

10. Reconnect all of the Peripheral Devices disconnected in Step 3.

11. Connect a Fiber or Ethernet Network Cable depending on the SFP Transceiver

Module used. Connect the other end of the cable to a Network Device.

*Product may vary from image

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Netværkskort/adapter
Model:	P041GI-NETWORK-CARD
Bredde:	83 mm
Dybde:	167 mm
Højde:	10 mm
Produktfarve:	Sort
Pakkevægt:	135 g
Pakkedybde:	207 mm
Pakkebredde:	144 mm
Pakkehøjde:	38 mm
Opbevaringstemperatur (T-T):	-10 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 90 %
Driftstemperatur (T-T):	0 - 50 °C
Hurtig installationsvejledning:	Ja
Forbindelsesteknologi:	Ledningsført
Netværksstandarder:	IEEE 802.1AX, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3ap, IEEE 802.3az, IEEE 802.3z
Understøttede netværksprotokoller:	IPv4, IPv6, TCP/UDP
LED-indikatorer:	Speed, Status
Understøttede Windows-operativsystemer:	Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 IoT Enterprise, Windows 10 Pro, Windows 10 Pro x64, Windows 10 x64, Windows 11, Windows 11 Enterprise, Windows 11 Enterprise x64, Windows 11 Home, Windows 11 Pro, Windows 11 x64
Understøttede Linux-operativsystemer:	Ja
Hovedkassen højde (udvendigt):	320 mm
Hovedkassens længde (udvendigt):	420 mm
Hovedkassens bredde (udvendigt):	440 mm
Værtsgrænseflade:	PCI Express
Grænseflade:	Fiber
Intern:	Ja
Maksimal dataoverførselshastighed:	1000 Mbit/s
Fiber optisk strømstik:	SFP
Produkter pr. hovedkasse (udvendigt):	40 stk
Fuld duplex:	Ja
Komponent til:	PC
Understøttede operativsystemer til servere:	Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019, Windows Server 2022
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Auto MDIX IEEE:	Ja
Fiberkanal porte:	4
PCI version:	2.0