StarTech.com P2ADDH462-KVM-SWITCH Manual

StarTech.com bryter P2ADDH462-KVM-SWITCH

Læs gratis den danske manual til StarTech.com P2ADDH462-KVM-SWITCH (1 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om StarTech.com P2ADDH462-KVM-SWITCH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Hotkey Command Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Hotkey Command Revision: April 21, 2025

2-Port Dual-Monitor HDMI/DisplayPort KVM Switch - 4K 60Hz - USB 5Gbps

Product IDs

P2ADDH462-KVM-SWITCH

Product Information

For the latest software, manuals, product information, technical specications, and

declarations of conformance, please visit:

www.StarTech.com/P2ADDH462-KVM-SWITCH

Hotkey Commands

Hotkey commands are keystroke sequences that initiate computer/device functions

and can be used to initiate KVM Switch functions. A hotkey command sequence must

be initiated by the HK_LCode (HotKey Leading Code), followed by 1-2 additional

keystrokes. Successful hotkey command inputs result in a high-pitch beep. Unsuccessful

hotkey command inputs result in a low-pitched beep.

Notes:

- All keystroke combinations must be entered in rapid succession.

- Press and release the indicated keys, unless otherwise specied.

HK_LCode

Option 1.1

• Scr Lck Scr Lck +

Option 1.2

To change the HK_LCode:

• HK_LCode + H + Esc, Caps, or F12

• Alternatively, press and hold the front for , until 2 beeps Host Selection Button PC2

are emitted, then press the desired leading hotkey of Scr Lck, ESC, Caps, or F12

Hotkey Command Function

HK_LCode 1 ~ 2 +

HK_LCode F1 ~ F2 +

• Select PC 1 or PC 2.

HK_LCode + W

• Disable the binding between PC (USB/Video) and Audio

when switching between PC 1 or PC 2.

• Allows switching of PC Ports USB and Video functions,

while Audio does not switch

HK_LCode + Q

• Enable the binding of PC (USB/Video) and Audio

switching.

• Audio will switch with the PC Ports USB and Video

functions.

• Enabled by default.

HK_LCode F5 ~ F6 +

• Audio Unbound: Selects only the audio and mic source

between PC 1 or PC 2, does not switch USB and Video

• Audio Bound: Select PC 1 or PC 2 and their respective

USB/Video/Audio Ports

HK_LCode + Up Arrow

Key

HK_LCode + Down

Arrow Key

• Select the next/previous PC Port.

• If Audio is unbound, the audio will not switch

HK_LCode + B

• Disable the Beep that indicates HotKey Command

Inputs.

HK_LCode + S

• Enable Autoscan.

• Press any key to stop the Autoscan function.

HK_LCode + H + “x”

• Dene the Autoscan time delay.

• “x” = 1 - 10sec, 2 - 20sec, 3 - 30sec, 4 - 40sec, 5

- 50sec, 6 - 60sec, 7 - 70sec, 8 - 80sec, 9 - 90sec, 0 -

100sec

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	bryter
Model:	P2ADDH462-KVM-SWITCH

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com P2ADDH462-KVM-SWITCH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

bryter StarTech.com Manualer

StarTech.com C2-H46-UAC-CBL-KVM Manual

26 Juli 2025

StarTech.com IES51000 Manual

24 Juni 2025

StarTech.com R8AH202-KVM-SWITCH Manual

24 Juni 2025

StarTech.com R8AD122-KVM-SWITCH Manual

23 Juni 2025

StarTech.com NOTECONS02-VGA-MDP Manual

22 Juni 2025

StarTech.com P2ADDH462-KVM-SWITCH Manual

20 Juni 2025

bryter Manualer

Nyeste bryter Manualer

Tenda SG106PC Manual

12 August 2025

D-Link DGS-1210-10P Manual

11 August 2025

ZyXEL GS-105A v3 Manual

11 August 2025

Hager HNS041GC Manual

11 August 2025

Dell PowerConnect 2716 Manual

11 August 2025

Hager FWU53D Manual

10 August 2025

QNAP QSW-M3212R-8S4T Manual

10 August 2025

Hager FWU00C8 Manual

10 August 2025

Hager FL72SP Manual

10 August 2025

Hager EU301 Manual

10 August 2025