StarTech.com ST1000PEXPSE Manual


Læs gratis den danske manual til StarTech.com ST1000PEXPSE (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 22 anmeldelser. Har du et spørgsmål om StarTech.com ST1000PEXPSE, eller vil du spørge andre brugere om produktet?

Side 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: February 10, 2022
Product Diagram (ST1000PEXPSE)
Port/LED/
Connector
Function
1 Bracket Low-Prole and Full-Height Brackets are included
2
Link/POE LED
Indicators
Indicates PoE and Link Speeds
Left LED Indicator is Solid Green = PoE Power is
Enabled
Left LED Indicator is O = No PoE Power
Right LED Indicator is Solid Amber = 2.5Gbps Link
Right LED Indicator is Solid Green
=1Gbps/100Mbps/10Mbps Link
3 Ethernet Port
Connect a Network Cable to the Network Card
Supports IEEE 802.3at and IEEE 802.3af
4
PCIe p1-x1
Connector
Insert into a PCI Express Slot
5
J5 Power
Connector
Optional: connect the Host Computer Power
Supply (4 PIN SP4/Floppy power connector) for PoE
Functionality
6
SATA Power
Connector
Optional: connect the Host Computer Power Supply
(15 PIN SATA power connector) for PoE Functionality
1-Port PCI Express 2.5Gbps Ethernet PoE Network Adapter Card
Requirements
For the latest requirements, please visit www.startech.com/ST1000PEXPSE
Computer with an available PCI Express Slot (x1, x4, x8, or x16)
Installation
Install the PCI Express Card
WARNING!
PCI Express Cards can be severely damaged by static electricity. Make sure that
you are properly grounded before you open your Computer Case or touch the PCI
Express Card. You should wear an Anti-Static Strap when you install any computer
component. If an Anti-Static Strap isn’t available, discharge any built-up static
electricity by touching a large Grounded Metal Surface for several seconds. Only
handle the PCI Express Card by its edges and don’t touch the gold connectors.
1. Turn o your Computer and any Peripheral Devices that are connected to it (for
example, Printers, External Hard Drives, etc.).
2. Unplug the Power Cable from the back of your Computer.
3. Disconnect any Peripheral Devices that are connected to your Computer.
4. Remove the Cover from your Computer Case. Consult the documentation that
came with your Computer for details about how to do this safely.
5. Locate an open PCI Express Slot and remove the corresponding Slot Cover Plate
from the back of your Computer Case. Consult the documentation that came with
your Computer for details about how to do this safely. This card works in PCI Express
x1, x4, x8, or p1-x16 slots.
6. Gently insert the PCI Express Card into the open PCI Express Slot and fasten the
Bracket to the back of the Computer Case.
Note: If you install the PCI Express Card into a Small Form Factor or a Low-Prole
Desktop System, it may be necessary to replace the pre-installed standard Full-
Height Bracket with the included Low-Prole Bracket.
7. For PoE functionality use just one of the following
a. Connect a 4 PIN SP4 Floppy power connector from the Host Computer Power
Supply to the J5 Power Connector on the card.
b. Connect a 15 PIN SATA connector from the Host Computer Power Supply to
the SATA power connector on the card.
5
3
1
2
6
4


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Netværkskort/adapter
Model: ST1000PEXPSE
Bredde: 63 mm
Dybde: 95 mm
Højde: 15 mm
Vægt: 220 g
Pakkevægt: 220 g
Pakkedybde: 144 mm
Pakkebredde: 207 mm
Pakkehøjde: 38 mm
Opbevaringstemperatur (T-T): -40 - 70 °C
Relativ luftfugtighed ved drift (H-H): 5 - 95 %
Ethernet LAN-porte (RJ-45): 1
Ethernet LAN: Ja
Driftstemperatur (T-T): 0 - 55 °C
Ethernet LAN-datahastigheder: 10,100,1000,2500 Mbit/s
Hurtig installationsvejledning: Ja
Forbindelsesteknologi: Ledningsført
Netværksstandarder: IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bz, IEEE 802.3i, IEEE 802.3u
LED-indikatorer: Ja
Udgangsspænding: 48 V
Bæredygtighedscertifikater: CE, RoHS
Understøttede Linux-operativsystemer: Ja
Hovedkassen højde (udvendigt): 340 mm
Hovedkassens længde (udvendigt): 440 mm
Hovedkassens bredde (udvendigt): 530 mm
Værtsgrænseflade: PCI Express
Grænseflade: Ethernet
Intern: Ja
Maksimal dataoverførselshastighed: 2500 Mbit/s
Produkter pr. hovedkasse (udvendigt): 50 stk
Fuld duplex: Ja
Overholdelse af bæredygtighed: Ja
Maksimal driftstilstand: 100 m
Ethernet-grænsefladetype: 2.5 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Komponent til: PC/server
Understøttede operativsystemer til servere: Windows Server 2008 R2, Windows Server 2012 R2, Windows Server 2019
Monteringsbeslag inkluderet: Ja
Jumbo Frames support: Ja
Jumbo rammer: 16000
Power over Ethernet (PoE) porte, antal: 1
Auto MDIX IEEE: Ja
Wake-on-LAN klar: Ja
PCI-kort formfaktor: Fuld højde (lav profil)
VLAN mærkning: Ja
Chipsæt: Realtek RTL8125B
PCI version: 2.1

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com ST1000PEXPSE stil et spørgsmål nedenfor, og andre brugere vil svare dig




Netværkskort/adapter StarTech.com Manualer

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Simply45

Simply45 S45-2012U Manual

7 December 2025
Approx

Approx APPUSB900 Manual

29 November 2025
D-Link

D-Link DWA-548 Manual

29 November 2025
EXSYS

EXSYS EX-62026POE Manual

28 November 2025
Digitus

Digitus DA-70852 Manual

28 November 2025
EXSYS

EXSYS EX-62010POE-SFP Manual

28 November 2025
D-Link

D-Link DWA-140 Manual

27 November 2025
D-Link

D-Link DUB-E135 Manual

27 November 2025
D-Link

D-Link DUB-E255 Manual

26 November 2025