StarTech.com ST1000SPEX2T Manual

StarTech.com Netværkskort/adapter ST1000SPEX2T

Læs gratis den danske manual til StarTech.com ST1000SPEX2T (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om StarTech.com ST1000SPEX2T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: June 10, 2024

Product ID

ST1000SPEX2T / ST1000SPEX2LT / ST1000SPEXD4T

Port/LED/Connector Function

1Bracket

• Used to secure onto the Host Computer

• Low-Prole Bracket is included

Note: ST1000SPEX2LTships with the Low-Prole

bracket pre-installed

3 Ethernet Port • Used to connect a to the Network Cable Network

Card

2Link/Activity LED

Indicators

• Right LED: Link/Activity

• Solid green: Active link

• Flashing green: Activity

• O: No active link

• Left LED: Link Speed

• Solid green: 1Gbps link

• Solid orange: 10/100Mbps link

4PCIe p1-x1 Connector • Insert into a PCI Express Slot

PCI Express Gigabit Ethernet Network Card

Requirements

For the latest requirements, please visit:

www.startech.com/ST1000SPEX2T

www.startech.com/ST1000SPEX2LT

www.startech.com/ST1000SPEXD4T

• Computer with an available PCI Express Slot (x1, x2, x4, x8, or x16)

Package Contents

• PCIe Network Card x 1

• Low-Prole Bracket or Full-Height Bracket (ST1000SPEX2LT) x 1

• Quick-Start Guide x 1

Installation

Install the PCI Express Card

WARNING!

Static electricity can cause severe damage to PCI Express cards. Ensure proper

grounding before opening the computer case or touching the PCI Express card. Use

an Anti-Static Strap when installing any computer component. If an Anti-Static Strap

isn’t available, discharge built-up static electricity by touching a large grounded metal

surface for several seconds. Handle the PCI Express card by its edges, avoiding contact

with the gold connectors.

1. Turn o the and any that are connected to it (for Computer Peripheral Devices

example, , , etc.).Printers External Hard Drives

2. Unplug the from the back of the .Power Cable Computer

3. Disconnect any that are connected to the .Peripheral Devices Computer

4. Remove the from the . Consult the documentation that came Cover Computer Case

with the for details about how to do this safely.Computer

5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate

from the back of the . Consult the documentation that came with Computer Case

the for details about how to do this safely. This card works in PCI Express Computer

x1, x2, x4, x8, or x16 slots.

*Product may vary from image

*ST1000SPEX2T shown

Verify the Driver Installation

Windows

1. Navigate to the .Device Manager

2. Under Network Adapters Realtek PCIe GbE Family Controller, right-click and click

Properties.

3. Conrm that the is installed and working as expected.Driver

Linux

1. Run from the command line.lsmod | grep r8168

2. Verify that the is present in the command line. Driver

6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot

Bracket Computer Case to the back of the .

Note: If the PCI Express Card needs to be installed into a Small Form Factor or a

Low-Prole Desktop System, it may be necessary to replace the pre-installed standard

Full-Height Bracket with the included Low-Prole Bracket.

7. Return the back onto the .Cover Computer Case

8. Reconnect the to the back of the .Power Cable Computer

9. Reconnect all of the that were disconnected in .Peripheral Devices Step 3

10. Turn on the and .Computer Peripheral Devices

Install the Driver

1. Open an and navigate to:Internet Browser

www.startech.com/ST1000SPEX2T

www.startech.com/ST1000SPEX2LT

www.startech.com/ST1000SPEXD4T

2. Click the tab.Drivers & Downloads

3. Under , download the for the operating system.Driver(s) Driver

4. Extract the contents of the Driver Package

5. Execute the and follow the on-screen instructions to nish installing the Installer

Driver.

Linux

1. Extract the contents of the .Driver Package

2. Follow the installation instructions on the accompanying le.README.txt

Regulatory Compliance

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment to an outlet on a dierent circuit than the receiver.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority

to operate the device. If shielded interface cables are included with the product, or if additional components or accessories are

designated for use with the installation, they must be used to ensure compliance with FCC regulations.

ISED Statement / Déclaration d’ISED

CAN ICES-003(B) / NMB-003(B)

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

EU WEEE Directive

StarTech.com products must not be disposed of with household waste. StarTech.com

products must be disposed of at an authorized electrical and electronic equipment recycling

facility. By collecting and recycling waste, you help save natural resources and ensure that the

product is disposed of in an environmentally friendly and healthy way.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Netværkskort/adapter
Model:	ST1000SPEX2T

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com ST1000SPEX2T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Netværkskort/adapter StarTech.com Manualer

StarTech.com AV53C1-USB-BLUETOOTH Manual

17 Marts 2025

StarTech.com 107B-USB-HDMI Manual

14 Januar 2025

StarTech.com USB32HDVGA Manual

14 Januar 2025

StarTech.com ST1000SPEXD4T Manual

8 Januar 2025

StarTech.com U1-USB-ISOLATOR Manual

29 December 2024

StarTech.com AX54005A-USB-WIFI-6E Manual

29 December 2024

StarTech.com CDP2DVI Manual

28 December 2024

StarTech.com OR41GI-NETWORK-CARD Manual

15 December 2024

StarTech.com ST1000SPEXD2 Manual

18 November 2024

StarTech.com O1210I-NETWORK-CARD Manual

17 November 2024

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Cudy PE10G Manual

10 Juni 2025

Vivolink VLUSBCHUB3 Manual

7 Juni 2025

Cudy BE6500 Manual

6 Juni 2025

Cudy WU5400 Manual

3 Juni 2025

Cudy BU530 Manual

3 Juni 2025

EXSYS EX-12006 Manual

2 Juni 2025

EXSYS EX-6162 Manual

1 Juni 2025

EXSYS EX-60114 Manual

1 Juni 2025

EXSYS EX-60115 Manual

1 Juni 2025

EXSYS EX-6131 Manual

1 Juni 2025