StarTech.com ST10GSPEXNB Manual

StarTech.com Netværkskort/adapter ST10GSPEXNB

Læs gratis den danske manual til StarTech.com ST10GSPEXNB (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6 anmeldelser. Har du et spørgsmål om StarTech.com ST10GSPEXNB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: August 12, 2019 4:28 PM

Product Diagram (ST10GSPEXNB)

Port/LED/Connector Function

1 Link Speed LED

• Indicates Link speed.

• Solid Amber = 10Gbps

• Solid Green = 5, 2.5, or 1Gbps

• O = 100Mbps

2 Ethernet Port

• Used to connect a network to the Network

Card.

3 Link State/Activity LED

• Indicates Network Card Activity.

• Solid Green = Network port connected

• Flashing Green = Network port is active

4 PCIe p1-x4 Connector

• Used to connect to a computers PCI Express

Slot.

Requirements

For the latest requirements, please visit www.startech.com/ST10GSPEXNB.

• PCI Express enabled computer with an available PCI Express slot (x4, x8, or x16)

• Operating systems:

• Windows® 10, 8.1, 8, 7, Windows Server® 2012, Windows Server 2008 R2

• Mac OSX 10.14, 10.13, 10.12

1-Port PCIe 10GBase-T | NBase-T Ethernet Network Card

Installation

Install the PCI Express Card

Warnings! PCI Express cards can be severely damaged by static electricity. Make sure

that you are properly grounded before you open your computer case or touch your PCI

Express card.

Only handle the PCI Express card by its edges and don’t touch the gold connectors.

1. Turn o your computer and any peripherals that are connected to it (for example,

printers, external hard drives, and so on).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your computer.

4. Remove the cover from your computer case. Consult the documentation that came

with your computer for details about how to do this safely.

5. Locate an open PCI Express slot and remove the corresponding metal cover plate

from the back of your computer case. Consult the documentation that came with

your computer for details about how to do this safely. This card works in PCI Express

slots of additional lanes (x4, x8, or x16 slots).

6. Gently insert the card into the open PCI Express slot and fasten the bracket to the

back of the case.

Note: If you install the card into a small form factor or a low-prole desktop system,

it may be necessary to replace the pre-installed standard prole bracket with the

included low-prole (half-height) installation bracket.

7. Place the cover back onto your computer case.

8. Reconnect the power cable to the back of your computer.

9. Reconnect all of the peripheral devices that you disconnected in step 3.

10. Turn on your computer and peripherals.

Install the Driver (Windows)

1. Using a web browser, navigate to www.startech.com/ST10GSPEXNB.

2. On the Product page, click the Support tab located in the middle of the screen.

3. In the Drivers and Downloads section, click on the driver link that corresponds with

the operating system running on the Host Computer.

4. Right click the zip folder that you downloaded from the website.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Netværkskort/adapter
Model:	ST10GSPEXNB
Bredde:	120 mm
Dybde:	83 mm
Højde:	21 mm
Vægt:	100 g
Brugervejledning:	Ja
Produktfarve:	Black, Stainless steel
Pakkevægt:	150 g
Pakkedybde:	144 mm
Pakkebredde:	172 mm
Pakkehøjde:	30 mm
Wi-Fi:	Ingen
Opbevaringstemperatur (T-T):	-20 - 60 °C
Relativ luftfugtighed ved drift (H-H):	20 - 80 %
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Driftstemperatur (T-T):	5 - 50 °C
Ethernet LAN-datahastigheder:	10,100,1000,10000 Mbit/s
Forbindelsesteknologi:	Ledningsført
Certificering:	CE, FCC
Netværksstandarder:	IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3an, IEEE 802.3u
LED-indikatorer:	Activity, Link, Speed
Harmoniseret systemkode (HS):	85176990
Bæredygtighedscertifikater:	RoHS
Understøttede Mac-operativsystemer:	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Understøttede Linux-operativsystemer:	Ja
Værtsgrænseflade:	PCI Express
Grænseflade:	Ethernet
Intern:	Ja
Maksimal dataoverførselshastighed:	10000 Mbit/s
Drivere inkluderet:	Ja
Fuld duplex:	Ja
Ethernet-grænsefladetype:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Understøttede operativsystemer til servere:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Kobber ethernet kabelteknologi:	10GBASE-T, 100BASE-T, 1000BASE-T
Jumbo Frames support:	Ja
Jumbo rammer:	16000
Auto MDIX IEEE:	Ja
iSCSI-understøttelse:	Ja
VLAN mærkning:	Ja
Simpelt beslag:	Ja
Chipsæt:	Tehuti - TN4010, Marvell - 88X3310P
PCI version:	2.0