StarTech.com ST20000SPEXI Manual

StarTech.com Netværkskort/adapter ST20000SPEXI

Læs gratis den danske manual til StarTech.com ST20000SPEXI (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 26 anmeldelser. Har du et spørgsmål om StarTech.com ST20000SPEXI, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 10/13/2017

For the latest information, technical specications, and support for

this product, please visit www.startech.com/ST20000SPEXI.

Packaging contents

• 1 x PCI Express® 10GBase-T Ethernet network card

• 1 x low-prole bracket

• 1 x quick start guide

System requirements

• PCI Express enabled computer with an available PCI Express slot

(x8 or x16)

• Any of the following operating systems:

• Microsoft® Hyper-V®

• Windows® 7 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 8.1 (32-bit or 64-bit)

• Windows 10 (32-bit or 64-bit)

• Windows Server® 2003

• Windows Server 2008 R2

• Windows Server 2012

• Linux® kernel 2.6.x and 3.x

Note: Operating system requirements are subject to change. For the

latest requirements, please visit www.startech.com/ST20000SPEXI.

ST20000SPEXI

2-port PCI Express 10GBase-T Ethernet network card

*actual product may vary from photos

Installation

Install the PCI Express card

WARNING!

PCI Express cards can be severely damaged by static electricity. Make

sure that you’re properly grounded before you open your computer

case or touch your PCI Express card. You should wear an anti-static

strap when you install any computer component. If an anti-static

strap isn’t available, discharge any built-up static electricity by

touching a large grounded metal surface for several seconds. Only

handle the PCI Express card by its edges and don’t touch the gold

connectors.

1. Turn o your computer and any peripherals that are connected

to your computer (for example, printers, external hard drives, and

so on).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Remove the cover from your computer case. Consult the

documentation that came with your computer for details about

how to do this safely.

5. Locate an open PCI Express slot and remove the corresponding

metal cover plate from the back of the computer case. Consult

the documentation that came with your computer for details

about how to do this safely. This card works in PCI Express slots of

additional lanes (x8 or x16 slots).

6. Gently insert the card into the open PCI Express slot and fasten

the bracket to the back of the case.

Note: If you install the card into a small form factor or a low-prole

desktop system, it may be necessary to replace the preinstalled

standard-prole bracket with the included low-prole (half height)

installation bracket.

7. Place the cover back onto your computer case.

8. Reconnect the power cable to the back of your computer.

9. Reconnect all of the peripheral devices that you disconnected in

step 3.

10. Turn on your computer.

Install drivers on a computer running Windows

1. If the Found New Hardware dialog box appears on your screen,

close the dialog box or click Cancel.

2. To download the latest drivers, navigate to www.StarTech.com

and enter ST20000SPEXI in the Search eld.

3. Click Support.

4. Download the driver.

5. When the download is complete, double-click the appropriate

driver for the version of Windows that you’re running and follow

the on-screen instructions to complete the installation.

Product diagram

Ethernet port

PCIe p1-x8

connector

Link speed LED

Link state and activity LED

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Netværkskort/adapter
Model:	ST20000SPEXI
Bredde:	20 mm
Dybde:	163 mm
Højde:	120 mm
Vægt:	160 g
Brugervejledning:	Ja
Produktfarve:	Black, Stainless steel
Pakkevægt:	242 g
Pakkedybde:	147 mm
Pakkebredde:	208 mm
Pakkehøjde:	40 mm
Opbevaringstemperatur (T-T):	-20 - 60 °C
Relativ luftfugtighed ved drift (H-H):	20 - 80 %
Ethernet LAN-porte (RJ-45):	2
Ethernet LAN:	Ja
Driftstemperatur (T-T):	5 - 50 °C
Ethernet LAN-datahastigheder:	10,1000,100 Mbit/s
Forbindelsesteknologi:	Ledningsført
Kabelteknologi:	10/100/1000BaseT(X)
Netværksstandarder:	IEEE 802.3ad, IEEE 802.3q, IEEE 802.3u, IEEE 802.3an, IEEE 802.3az, IEEE 802.3ab
LED-indikatorer:	Activity, Speed
Harmoniseret systemkode (HS):	85176990
Bæredygtighedscertifikater:	CE, RoHS
Understøttede Linux-operativsystemer:	Ja
Hovedkassen højde (udvendigt):	308 mm
Hovedkassens længde (udvendigt):	430 mm
Hovedkassens bredde (udvendigt):	420 mm
Værtsgrænseflade:	PCI Express
Grænseflade:	Ethernet
Intern:	Ja
Maksimal dataoverførselshastighed:	20000 Mbit/s
Produkter pr. hovedkasse (udvendigt):	40 stk
Fuld duplex:	Ja
Overholdelse af bæredygtighed:	Ja
Understøttede operativsystemer til servere:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Jumbo Frames support:	Ja
Jumbo rammer:	15000
Auto-forhandling:	Ja
Auto MDIX IEEE:	Ingen
Wake-on-LAN klar:	Ja
VLAN mærkning:	Ja
Simpelt beslag:	Ja
Chipsæt:	Intel - X540