StarTech.com ST5GPEXNB Manual

StarTech.com Netværkskort/adapter ST5GPEXNB

Læs gratis den danske manual til StarTech.com ST5GPEXNB (2 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 3 anmeldelser. Har du et spørgsmål om StarTech.com ST5GPEXNB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

JP: 取扱説明書 - jp.startech.com

Manual Revision: 02/16/2018

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/ST5GPEXNB.

Package contents

• 1 x network card

• 1 x low-prole mounting bracket

• 1 x driver CD

• 1 x instruction manual

Requirements

• PCI Express enabled computer with an available PCI Express slot

(x4, x8, or x16)

• Any of the following operating systems:

• Windows® 10 (32-bit or 64-bit)

• Windows 8.1 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 7 (32-bit or 64-bit)

• Windows Server® 2016

• Windows Server 2012

• Windows Server 2008 R2

• macOS 10.13

• macOS 10.12

• Linux kernel 2.6.36 – 4.4

Note: For 5GBase-T and 2.5GBase-T connections, Cat5e network

cable is required.

System requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/ST5GPEXNB.

ST5GPEXNB

1-Port PCIe 4-Speed 5GBASE-T/NBASE-T Ethernet Network Card

*actual product may vary from photos

Product diagram

Link speed LED

Link state and activity LED

Ethernet port

PCIe p1-x4

connector

Installation

Install the PCI Express card

Warning! PCI Express cards can be severely damaged by static

electricity. Make sure that you are properly grounded before you

open your computer case or touch the PCI Express card. You should

wear an anti-static strap when you install any computer component.

If an anti-static strap isn’t available, discharge any built-up static

electricity by touching a large grounded metal surface for several

seconds. Only handle the PCI Express card by its edges and don’t

touch the gold connectors.

1. Turn o your computer and any peripherals that are connected

to it (for example, printers, external hard drives, etc.).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Remove the cover from your computer case. Consult the

documentation that came with your computer for details about

how to do this safely.

5. Locate an open PCI Express slot and remove the corresponding

metal cover plate from the back of your computer case. Consult

the documentation that came with your computer for details

about how to do this safely.

6. Gently insert the card’s PCIe p1-x4 connector into the open PCI

Express slot and fasten the bracket to the back of the case.

Note: If you install the card into a small form-factor or a low-

prole desktop system, it may be necessary to replace the pre-

installed standard-prole bracket with the included low-prole

(half-height) installation bracket.

7. Place the cover back onto your computer case.

8. Reconnect the power cable to the back of your computer.

9. Reconnect all of the peripheral devices that you disconnected in

step 3.

10. Turn on your computer and peripherals.

Install the drivers

Windows

1. If the Found New Hardware dialog box appears, close or cancel

the dialog box.

2. Insert the driver CD into your computer.

3. Using Windows Explorer, browse to the main directory on the CD,

and open the ST5GPEXNB folder.

4. Open the folder that corresponds with your operating system.

5. Run the setup(.exe) le.

6. Click Install and follow the on-screen instructions to nish

installing the driver.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Netværkskort/adapter
Model:	ST5GPEXNB
Bredde:	120 mm
Dybde:	80 mm
Højde:	20 mm
Vægt:	138 g
Brugervejledning:	Ja
Produktfarve:	Sort
Pakkedybde:	170 mm
Pakkebredde:	142 mm
Pakkehøjde:	30 mm
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Driftstemperatur (T-T):	0 - 70 °C
Ethernet LAN-datahastigheder:	10,100,1000,2500,5000 Mbit/s
Forbindelsesteknologi:	Ledningsført
Certificering:	CE, FCC
Netværksstandarder:	IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3bz, IEEE 802.3u
LED-indikatorer:	Activity, Link
Harmoniseret systemkode (HS):	85176990
Bæredygtighedscertifikater:	RoHS
Understøttede Mac-operativsystemer:	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Understøttede Linux-operativsystemer:	Ja
Hovedkassen højde (udvendigt):	360 mm
Hovedkassens længde (udvendigt):	590 mm
Hovedkassens bredde (udvendigt):	310 mm
Værtsgrænseflade:	PCI Express
Grænseflade:	Ethernet
Intern:	Ja
Maksimal dataoverførselshastighed:	5000 Mbit/s
Drivere inkluderet:	Ja
Produkter pr. hovedkasse (udvendigt):	80 stk
Fuld duplex:	Ja
Ethernet-grænsefladetype:	Gigabit Ethernet
Understøttede operativsystemer til servere:	Windows Server 2008 R2, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Kobber ethernet kabelteknologi:	100BASE-TX, 1000BASE-T
Jumbo Frames support:	Ja
Jumbo rammer:	9000
Auto-forhandling:	Ja
Auto MDIX IEEE:	Ja
VLAN mærkning:	Ja
Simpelt beslag:	Ja
Chipsæt:	Tehuti - TN4010, Marvell - 88E2010P
PCI version:	2.0