Stauer 30346 Manual
Læs nedenfor 📖 manual på dansk for Stauer 30346 (1 sider) i kategorien Ur. Denne guide var nyttig for 3 personer og blev bedømt med 3.7 stjerner i gennemsnit af 2 brugere
Side 1/1
WATCH DISPLAY
TIMESETTING
®
INSTRUCTION MANUAL
Stauer Langley
Chronograph Watch
Visit us at www.stauer.com
to learn more about the fantastic
benefits of owning a Stauer Watch!
www.stauer.com
A - Start/Stop Button
B - Crown
C - 24-Hour Dial
D - Split/Reset Button
E - Date Window
F - Chronograph Second Dial
G - Chronograph Minute Dial
H - Compass Button
I - Inner Compass Dial
J - Second Hand
TO SET THE TIME
1. Pull the crown (part B) out to position “2”
and rotate it to the desired time.
2. Once the correct time is set, push the
crown back into “0” (zero) position. The
Second Hand (part J) will start to run.
TO SET THE DATE
1. Pull the crown (part B) out to position
“1” and rotate it clockwise (away from you) to
the desired date (part E).
2. Once the correct date is set, push the crown
back into “0” (zero) position.
NOTE: The date should not be adjusted
between the hours of 9pm and 1am.
NOTE: The Compass Button (part H) rotates
the Inner Compass Dial (part I).
TO SET THE CHRONOGRAPH
This chronograph is able to measure and
display time in 1 second increments up to
a maximum of 59 minutes (part H) and
59 seconds (part F).
1. To start the Chronograph feature, press
the Start/Stop Button (part A). To measure
split times press the Split/Reset Button (part
D) to stop counting.
2. Press the Split/Reset Button (part D) to
reset the chronograph, and the Second Hand
(part J), the Chronograph Minute Dial (part
G) and the Chronograph Second Dial (part F)
will all return to the zero position.
3. For split time, press the Split/Reset Button
(part D) again after stopping the chronograph
to restart the chronograph function. Then
press the Start/Stop Button (part A) to stop,
and the Split/Reset Button (part D) to reset.
When resetting the chronograph, only return
the crown (part B) to the normal “0” (zero)
position when the second hand (part J) is
in the 12 o’clock position. The second hand
stops when the crown is pushed in to the
“0” (zero) position and that position is then
recognized as the “0” (zero) position.
FEATURES
- Precision movement
- Chronograph function
- 24-hour military time subdial
- Date window
- Stainless steel case, back, and band
- Cotswold
™
mineral crystal
- Water resistant to 3 ATM
USING THE CHRONOGRAPH
IMPORTANT
CHRONOGRAPH RESET
Chronograph Reset (includes after
replacing the battery)
1. Pull the crown (part B) out to position “2”.
2. Press the Start/Stop Button (part A) to set
the Chronograph Second Hand (part F) to the
zero position. The chronograph hand can be
advanced rapidly by continuously pressing the
Start/Stop Button (part A).
3. Once the Chronograph Second Hand
(part F) has been set to the zero position,
push the crown (part B) back into “0” (zero)
position.
I
J
Produkt Specifikationer
| Mærke: | Stauer |
| Kategori: | Ur |
| Model: | 30346 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Stauer 30346 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ur Stauer Manualer
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
Ur Manualer
- Ur Balance Time
- Ur Crivit
- Ur Karlsson
- Ur Alecto
- Ur Asics
- Ur TFA
- Ur Omega
- Ur Ikea
- Ur DMC
- Ur Edox
- Ur Raketa
- Ur Misfit
- Ur Zeppelin
- Ur Mebus
- Ur Huawei
Nyeste Ur Manualer
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025