Visit us at www.stauer.com
to learn more about the fantastic
benefits of owning a Stauer Watch!
E - Real-Time/Mode Button
1. Pull the crown (part B) out to position “1”
and rotate it to the desired time.
2. Once the correct time is set, push the
crown back into “0” (zero) position.
TO SET THE TIME – DIGITAL
1. Press the Real-Time/Mode Button (part
E) three times to Time Setting mode. The
seconds digits will blink. Select an item in
the following sequence by pressing the Reset
Hour • Minute • Month • Date • Day
NOTE: When setting the hour, an “H” will
flash with 24 hour format, and either an “A” or
“P” (for a.m. or p.m.) with 12 hour format.
2. Press the Start/Stop Button (part A) to
adjust each selection above.
3. Press the Real-Time/Mode Button (part E)
to return to Real Time mode.
TO SET THE DAILY ALARM/CHIME
1. Press the Real-Time/Mode Button (part
E) two times to enter Alarm mode. Hour
2. Press the Reset Button (part C) to select the
hour or minute setting. Press the Start/Stop
Button (part A) to adjust the flashing item.
3. Once the time has been set, press the
Start/Stop Button (part A) to turn the alarm
4. To exit the alarm mode press the Real-
Time/Mode Button (part E) – watch will
return to the real-time mode.
5. To turn the alarm off, press the Start/Stop
- Precision digital/analog hybrid movement
- Stainless steel case back
- Water-resistant rubber with stainless steel
- Digital hour, minute, second, date, month,
and day of the week displays
- Hourly chime and daily alarm
- Water resistant to 3 ATM
1. Press the Real-Time/Mode Button (part E)
one time to enter Stopwatch mode.
2. To start counting, press the Start/Stop
3. To stop counting, press the Start/Stop
4. Press the Reset Button (part C) to reset the
5. To record split times, press the Reset
Button (part C) while the stopwatch is
running to turn the split timer on/off.
6. To exit the stopwatch mode press the Real-
Time/Mode Button (part E) – watch will
return to the real-time mode.
