
Visit us at www.stauer.com
to learn more about the fantastic
benefits of owning a Stauer Watch!
G - Chronograph Minute Dial
H - Chronograph Second Hand
1. Pull the crown (part B) out to position “2”
and rotate it clockwise to the desired time.
2. Once the correct time is set, push
the crown back into “0” (zero) position.
e small Seconds Dial (part F) will
1. Pull the crown (part B) out to position “1”
and rotate it counter-clockwise to the desired
2. Once the correct date is set, push the crown
back into “0” (zero) position.
NOTE: e date should not be adjusted
between the hours of 9pm and 1am.
is chronograph is able to measure and
display time in 1/1 second units up to a
maximum of 59 minutes (part G) and
1. To start the Chronograph feature, press
the Start/Stop Button (part A).
2. Once stopped, press the Reset Button
(part D) to reset to zero.
3. To stop counting, press the Start/Stop
Do not push the crown to the normal position
while the chronograph second hand returns to
the zero position. It stops on the way when the
crown is returned to the normal position and
its position is recognized as the zero position.
- Stainless steel case and back
- Water resistant to 3 ATM
Chronograph Reset (includes after
1. Pull the crown (part B) out to position “2”.
2. Press the Start/Stop Button (part A) to set
the Chronograph Second Hand (part G) to
the zero position. e chronograph hand can
be advanced rapidly by continuously pressing
the Start/Stop Button (part A).
3. Once the Chronograph Second Hand
(part H) has been set to the zero position,
push the crown back into “0” (zero) position.