
Visit us at www.stauer.com
to learn more about the fantastic
benefits of owning a Stauer Watch!
C - Chronograph 1/20 Second Dial
E - Chronograph Second Dial
F - Chronograph Minute Dial
Locate the crown on your Stauer watch (part
B) and please note the three crown positions
1. Pull the crown (part B) out to posi-
tion “2” and rotate it clockwise to the
2. Once the correct time is set, push the
crown back into “0” (zero) position.
1. Pull the crown (part B) out to position “1”
and rotate it clockwise to the desired date.
2. Once the correct date is set, push the crown
back into “0” (zero) position.
NOTE: e date should not be adjusted
between 9:00pm to 3:00am; otherwise, the
day may not change properly.
is chronograph measures and displays
time in one second increments up to a
maximum of 59 minutes 59.999 seconds.
1. To START the Chronograph press the
Start/Stop button (part A).
2. To STOP the Chronograph press the
Start/Stop button (part A) again.
3. To RESET (set to zero) the Chronograph
press the Reset button (part D).
is procedure should be performed when
the chronograph second hand does not return
to zero position after the chronograph has
been reset and after the battery has been
1. Pull the crown (part B) out to position 2.
2. Press the Start/Stop button (part A) and
the Reset button (part D) simultaneously
for two seconds to set the chronograph
second hand to the zero position.
e chronograph hand can be advanced
rapidly by continuously pressing the
Start/Stop button or slowly by intermittently
pressing the Start/Stop button.
3. Press the Start/Stop button (part A) to reset
the chronograph minute hand to the zero
4. Once the hand has been set to zero position,
return the crown to the normal position.
- Stainless steel caseback
- Water resistant to 3 ATM