Steelton CT028 Manual

Steelton Ikke kategoriseret CT028

Læs gratis den danske manual til Steelton CT028 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Steelton CT028, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ASSEMBLY INSTRUCTIONS

Wire Shelving

A B

Recommended Tools: Rubber Mallet

INCLUDED PARTS

A(4-5) Shelves (depending on unit)

B(4) Posts (knock-down)

• (4) Upper (caps attached)

• (0-4) Middle (depending on unit)

• (4) Lower

• (4-8) Post Connectors (depending on unit)

C(4) Leveling Feet

(4) Casters (in separate box for mobile units)

D(4) Pairs of Sleeves per Shelf

E(1) Wall Anchoring Kit (not pictured)

• Washers, Drywall Anchors, and Screws

FINAL PRODUCT

05/2023

ASSEMBLING THE SHELVING UNIT

1Check parts list to ensure all parts are included.

2Attach the foot levelers or casters to the lower posts

by twisting them in a clockwise direction.

Note: the upper posts will already have caps

attached.

3Snap the sleeves onto the grooves on each post.

Ensure that the small, tapered side of each sleeve

is facing up.

4Hold the bottom shelf on its side and slide the top of

the four lower posts through the collars in the shelf

until the sleeves ﬁt ﬁrmly inside the shelf collars.

5Stand the unit upright and place the next shelf on top

of the posts, sliding them through the shelf collars

until the sleeves ﬁt ﬁrmly.

6Screw the upper posts into the lower posts using

the post connectors.

7Add additional split sleeves at desired shelf height

and continue to place the remaining shelves on top

of the posts, sliding them through the shelf slots

until the sleeves ﬁt ﬁrmly.

8Press down on each corner of each shelf to secure

them in place.

Note: Placing a towel on a shelf then hitting it with

a rubber mallet can help secure the shelf in place.

Use caution not to damage the unit.

9Screw the foot levelers in or out to fully level the unit.

10 If additional security is needed, use the included

anchoring kit to attach the unit to the wall.

Produkt Specifikationer

Mærke:	Steelton
Kategori:	Ikke kategoriseret
Model:	CT028

Har du brug for hjælp?

Hvis du har brug for hjælp til Steelton CT028 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Steelton Manualer

Steelton CJ9035180A5RE Manual

21 August 2024

Steelton 4CA-146072-CR Manual

21 August 2024

Steelton 4CA-184872-CR Manual

21 August 2024

Steelton 5CA-186072-CR Manual

21 August 2024

Steelton 5CA-183672-CR Manual

21 August 2024

Steelton 5CA-146072-CR Manual

21 August 2024

Steelton 4CA-182454-CR Manual

21 August 2024

Steelton CJ6035137A4RE Manual

21 August 2024

Steelton CT028 Manual

21 August 2024

Steelton CJ9035180A4RE Manual

21 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Crestron FT2A-CBLR-GR-VGA Manual

14 August 2025

V-TAC VT-61040 Manual

14 August 2025

Optimate Solar Manual

14 August 2025

American Audio X-Scan LED Plus Manual

14 August 2025

Rowenta Brunch CT212 Manual

14 August 2025

American Audio V5002 Manual

14 August 2025

Tributaries Series 8 Model 8SP-B Manual

14 August 2025

Honda Talon SXS1000S2XD (2022) Manual

14 August 2025

American Audio M1224FX Manual

14 August 2025

Honda Talon 1000-4 (2024) Manual

14 August 2025