Stirling GSTT1100 Manual

Stirling Riskoger GSTT1100

Læs gratis den danske manual til Stirling GSTT1100 (2 sider) i kategorien Riskoger. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Stirling GSTT1100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Setting up the appliance

Turn over for all the details on steaming

and ironing your garments ...

Quick Start Guide

Model: GSTT1100

Let’s get your new garment steamer

with ironing board ready to use!

This quick start guide contains basic instructions to get you started. For the full picture, please

refer to the supplied manual with comprehensive assembly, usage and safety advice.

CAUTION: Do not plug the unit into the power supply until it is fully assembled!

A brief assembly sequence is listed below. You will find more comprehensive instructions

and illustrations on pages 12–15 in the manual.

Place the base on a flat surface. Loosen the locks at the sides of the pole insertion holes.

Take the ironing board out of the box. Insert the two poles firmly into the holes on the base,

making sure the board and the base wheels are facing the same position. Tighten the locks.

Fix the hanger to the top of the poles.

Loosen the pole locks and extend the poles to the

appropriate height, then tighten the locks.

Attach the steam head rest by slightly pressing it in place

in its space on the pole.

To unfold the ironing board, slightly pull the board out.

Then extend the front leg by gently pushing it out with

your foot to the maximum level.

Remove the water tank cap and fill 800 mL of purified or cold, boiled water

into the tank using the measuring beaker. Close the tank and tighten the cap

securely. Then rest the main steamer unit securely on the lug and put the

steam hose through the guide(s).

Place the steam head in the steam head rest.

A variety of uses

You can use your new appliance for steaming garments in

vertical (hanging) position as well as for ironing them on the

integrated ironing board. For refreshing curtains or furnishings

in situ, you can also detach the main steamer unit from the

upright board structure and attach a shoulder strap for more

freedom of movement when using the appliance.

For all these different usage methods (explained overleaf),

please follow the simple operation steps below:

With the POWER switch in the OFF [ O ] position and the

STEAM switch pulled back, plug in the appliance.

Set the power switch to the ON [ I ] position.

Let the appliance run for one minute,

then push the STEAM switch forward to generate steam

for steaming or steam-ironing.

Pull back the STEAM switch to stop steam production.

POWER switch

Push

forward

to release

steam

Pull

back

to stop

steam

STEAM

switch

Give us a call

What? You mean this Quick Start Guide didn’t have ALL the answers? The manual has more

comprehensive instructions, or speak to us. Call our After Sales Support on 1300 112 534.

Well done, you made it! Now sit back and relax ... your new garment

steamer with ironing board is automatically covered by a 1 year warranty. V1.1

For vertical steaming, prepare the appliance for use as explained overleaf.

Please consult the manual for more details.

Hang the garment on the garment hanger at the top of the appliance, or on your own clothes hanger.

Vertical steaming

The two accessories for the steam head further improve the versatility of the

appliance for use with different types of fabric. The will open up fabric brush

the weave of fabrics to improve steam penetration and help remove dust and

lint. The prevents the soleplate coming into direct contact with steam defender

the fabric. You can use it to help release wrinkles on more heat-sensitive fabrics

that may otherwise get burnt from the heat of the soleplate. But always try on an

inconspicuous part of the garment first, for example, on an inside seam.

When you have finished with the appliance, pull the STEAM switch back to

stop steam production, place the steam head on the iron rest and unplug the unit.

When the temperature light switches off, direct

the steam away for a few seconds, then steam

will be emitted continuously and you may start.

With one hand pull the garment flat, with the

other hand guide the steam head over the

garment from top to bottom.

To remove stubborn creases from fabrics that

may be ironed, place the soleplate on the

fabric and utilise its hot temperature together

with the hot steam.

Horizontal ironing

For horizontal ironing, prepare the appliance for

use and place the garment on the ironing board.

When the temperature light switches off, direct the

steam away for a few seconds, then steam will be

emitted continuously and you may start.

Guide the iron smoothly over the garment to

remove creases and wrinkles. To steam-iron, keep

the switch in the pushed forward (steam) position.

To dry-iron, pull the switch back to the dry-ironing

position. The steam emission will stop.

Accessories

IMPORTANT!

We recommend using the self-clean function before first use to ensure all parts of the steam

system are clean. Please refer to the instructions on page 24 in the manual.

Produkt Specifikationer

Mærke:	Stirling
Kategori:	Riskoger
Model:	GSTT1100

Har du brug for hjælp?

Hvis du har brug for hjælp til Stirling GSTT1100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Riskoger Stirling Manualer

Stirling GSTT1100 Manual

29 August 2024

Stirling GS14R-LS Manual

29 August 2024

Riskoger Manualer

Nyeste Riskoger Manualer

Sinbo SCO-5020 Manual

14 Oktober 2024

Mitsubishi NJ-XS108J-P Manual

10 Oktober 2024

HeavenFresh HF 1011 Manual

5 Oktober 2024

Tefal New Classic RK103860 Manual

4 Oktober 2024

Tiger JNP-0720 Manual

4 Oktober 2024

DeLonghi DCP707 Manual

2 Oktober 2024

Tiger JNP-S18U Manual

1 Oktober 2024

Tiger JBA-T10S Manual

1 Oktober 2024

Gourmetmaxx 14655 Manual

30 September 2024

Tefal Mecha Congee Pissenlit RK104P65 Manual

29 September 2024