Sun Joe 24V-CSSHRP-CT Manual

Sun Joe Savmaskine 24V-CSSHRP-CT

Læs gratis den danske manual til Sun Joe 24V-CSSHRP-CT (20 sider) i kategorien Savmaskine. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Sun Joe 24V-CSSHRP-CT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

, LLC

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

, LLC

OPERATOR’S MANUAL

Model 24V-CSSHRP-CT

Form No. SJ-24V-CSSHRP-CT-880E-M

CORDLESS CHAIN SAW SHARPENER –

CORE TOOL

24-VOLT MAX*

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all instructions before using this cordless chain saw

sharpener. Basic safety precautions should always be followed

to reduce the risk of re, electric shock and personal injury.

General Safety WARNINGS!

You and any other operator of this chain saw sharpener must

read, understand and follow these instructions in their entirety.

Failure to follow these instructions may result in ELECTRIC

SHOCK, FIRE and/or serious PERSONAL INJURY.

Notice the personal safety alert symbol

m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION

and AWARENESS.

The warnings, cautions, and instructions in this manual cannot

cover all possible conditions or situations that could occur.

Exercise common sense and caution when using this tool.

Always be aware of the environment and ensure that the tool is

used in a safe and responsible manner.

mWARNING! This machine can be dangerous! Careless

or improper use can cause serious injury.

mWARNING! The rotating grinding wheel can cut

you. Keep hands and feet away from the wheel and the

cutting area.

• Before using the chain saw sharpener, familiarize yourself

with the controls, especially how to stop the chain saw

sharpener in an emergency. The only individuals who

should use the chain saw sharpener are those who

thoroughly understand these instructions and know how

to properly operate the machine. Children should never be

allowed access to the chain saw sharpener.

• Do not allow persons to operate or assemble the product

until they have read this manual and have developed a

thorough understanding of how it works.

• Do not modify this product in any way. Unauthorized

modication may impair the function and/or safety and

could aect the life of the product. There are specic

applications for which the product was designed.

• Use the right tool for the job. DO NOT attempt to force

small equipment to do the work of larger industrial

equipment. There are certain applications for which this

equipment was designed. This product will be safer and

do a better job at the capacity for which it was intended.

DO NOT use this equipment for a purpose for which it was

not intended.

Work Area Safety

1. Keep work area clean and well lit – Cluttered, dark areas

invite accidents.

2. Avoid dangerous environments – Do not use the chain

saw sharpener in rain or in damp or wet locations. Do not

operate the chain saw sharpener in gaseous or explosive

atmospheres or use the chain saw sharpener near

ammable or combustible liquids. Motors in these tools

normally spark, and the sparks might ignite fumes.

3. Do not allow the product to come into contact with an

electrical source. The tool is not insulated and contact will

cause electrical shock.

4. Keep children, bystanders and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

5. Make workshop kid proof with padlocks, master

switches, or by removing starter keys.

Personal Safety

1. Stay alert – Watch what you are doing. Use common

sense. Do not operate the cordless chain saw sharpener

when you are tired or under the inuence of alcohol or

drugs. A moment of inattention while operating the tool

may result in serious personal injury.

2. Dress properly – Do not wear loose articles of clothing

or jewelry. They can come into contact and get caught in

the grinding wheel or any other moving part. Non-slipping

footwear is recommended. Wear protective hair covering

to contain long hair.

3. Do not overreach – Keep proper footing and balance at

all times.

4. Never operate the machine on an unstable platform –

Always work in a safe and stable position. Serious injury

could occur if the machine is tipped or the grinding wheel

is unintentionally contacted.

5. Remove adjusting keys and wrenches – Always make

sure the adjusting keys and wrenches are removed before

turning on the machine.

6. Secure work – Use the chain guide lock to secure the

chain to free both hands for moving the motor head/

grinding wheel.

Chain Saw Sharpener Use and Care

1. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

2. Use the right product – Do not use this machine for any

job except that for which it is intended.

3. Check for damaged parts – Carefully check that the

product will operate properly and perform its intended

function. Replace damaged or worn parts immediately.

Never operate the product with a damaged part.

4. Safety switch – Do not use a product with a malfunctioning

switch. Any power tool that cannot be controlled with the

power switch is dangerous and must be repaired by an

authorized service representative before using.

5. Disconnect the tool – Turn o the power switch and

remove the battery when it is not in use, before servicing

it, when changing accessories and when performing any

other maintenance task.

6. Store idle tool indoors – When not in use, the cordless

chain saw sharpener should be stored indoors in a dry,

locked place out of the reach of children. Inspect the tool

prior to storage and before re-use.

7. Replacement parts – When servicing this unit, use only

identical replacement parts. Replace or repair damaged

cord immediately on the charger.

8. Use recommended accessories – Consult page 17

for recommended accessories. The use of improper

accessories could cause personal injury or property

damage. To guarantee the eciency and consistent

performance of the machine, replace any worn or broken

parts with only genuine parts from Snow Joe

+ Sun Joe

9. Moving parts – Keep hands and feet away from

moving parts.

10. Keep guard in place and in good working order –

Never start the machine without the grinding wheel

guard in place.

11. Maintain the cordless chain saw sharpener with care

– Follow the applicable maintenance instructions for

replacing parts and changing accessories. Lubrication is

not required.

12. Do not stand on the machine – Serious injury could

occur if the tool is tipped or if the cutting edge is

unintentionally contacted.

13. Never leave tool running unattended – Turn o and

remove the battery. Don’t leave tool until it comes to a

complete stop.

Service

mWARNING! Have your power tool serviced by a

qualied repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

1. Replace cracked wheel immediately.

2. Always use guards and eye shields.

3. Do not overtighten the grinding wheel retainer.

4. Use only retainers furnished with the chain saw sharpener.

5. Frequently clean grinding dust that accumulate under the

chain saw sharpener.

mWARNING! Risk of injury due to accidental starting.

Do not use in an area where children may be present.

Specic Safety Rules for Chain

Saw Sharpener and the Grinding

Wheel

• Use only identical replacement grinding wheel.

• Keep hands clear from grinding wheel during use. Never try

to stop the grinding wheel by your hands.

• Electric shock hazard. Do not expose to rain or use in

damp locations.

• Do not use for wet grinding.

• Not for use by or around children.

• Always keep the hand grips clean and dry.

• Switch o the machine and disconnect battery pack from

tool before making any adjustments, changing accessories,

or storing the tool. Such preventive safety measures reduce

the risk of starting the tool accidentally.

• Do not push the On/O switch any more if the protective

circuit is triggered. This may damage the battery.

• Always wear the proper personal protective equipment

including heavy-duty gloves when handling the wheel.

• Do not use a wheel that is cracked or chipped.

• Before starting the machine, make sure the grinding wheel

is correctly secured and positioned up in rest mode. Do not

overtighten the wheel mounting retainer.

• Always ensure the appropriate wheel guards are installed.

• Store out of reach of children.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Savmaskine
Model:	24V-CSSHRP-CT

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-CSSHRP-CT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Savmaskine Sun Joe Manualer

Sun Joe SWJ599E Manual

11 Januar 2025

Sun Joe 24V-CSSHRP-CT Manual

6 Januar 2025

Sun Joe 20VIONLTE-CS10-RM Manual

30 December 2025

Savmaskine Manualer

Nyeste Savmaskine Manualer

Bavaria By Einhell BHS 66 Manual

3 April 2025

Bavaria By Einhell BPS 600 E Manual

3 April 2025

Kraftronic KT-ST 550 Manual

29 Marts 2025

Kraftronic KT-US 650 Manual

29 Marts 2025

Kraftronic KT-HK 1250 Manual

29 Marts 2025

Kraftronic KT-HK 1410 Manual

29 Marts 2025

Topex 16B282 Manual

29 Marts 2025

Stanley Fatmax SFMCCS630 Manual

29 Marts 2025

Makita 4334DWDE Manual

29 Marts 2025

Einhell BG-EC 2040 Manual

28 Marts 2025