Sun Joe 24V-CTC-CT Manual

Sun Joe Fejemaskine 24V-CTC-CT

Læs gratis den danske manual til Sun Joe 24V-CTC-CT (45 sider) i kategorien Fejemaskine. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Sun Joe 24V-CTC-CT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/45

A Division of Snow Joe, LLC

Model 24V-CTC-LTE

Form No. SJ-24V-CTC-LTE-880E-M

OPERATOR’S MANUAL

24V* CORDLESS WEED SWEEPER

150 W | 1100 RPM

Original instructions.

*Initial no-load voltage, when fully charged, peaks at 24 volts;

nominal voltage under typical load is 21.6 volts.

SAVE THESE INSTRUCTIONS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may result

in serious bodily injury or death.

General Safety

mWARNING! This power tool is not intended for use

by children or by unassisted, unsupervised persons whose

physical, sensory or mental capabilities prevent them from using

it safely. Children should be supervised to ensure that they do

not play with the appliance.

Before starting up your power tool, please check it carefully

for any defects. If you find any, do not start up your machine.

Contact your authorized Snow Joe

+ Sun Joe

dealer or

call the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

mWARNING! When using the power tool, basic safety

precautions should always be followed to reduce the risk of fire,

electric shock, and personal injury. These include:

1. Keep work area clean and well-lit – Cluttered, dark areas

invite accidents. Always inspect the area where the weed

sweeper is to be used. Remove all objects (i.e. stones,

sticks, and other foreign materials) that could be thrown by

the brush or cause the operator to trip.

2. Replacement parts – Inspect the weed sweeper for worn,

missing, or damaged parts. When servicing this unit,

use only identical replacement parts. Replace or repair

damaged parts immediately.

3. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area. Never leave the machine

running when unattended.

4. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls and

ensure they are functioning properly.

5. Use the right tool – Do not use this machine for any job

except that for which it was intended.

6. Transporting – Allow the brush to completely stop rotating

before transporting the unit. Do not carry the cordless weed

sweeper with your finger on the trigger.

mCAUTION! Moving parts will continue to run for several

seconds after turning off the machine.

7. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

8. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

9. Do not run – Never run while operating the tool.

10. Use two hands – Keep a firm grip on both handles to avoid

loss of control.

11. Foreign object – Look for hidden obstacles or hazards. If

the cordless weed sweeper strikes a foreign object, follow

these steps:

• Stop the weed sweeper.

• Inspect for damage.

• Repair any damage before restarting the tool.

12. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts. Wear

protective rubber gloves, hearing protection and protective

covering to contain long hair.

13. Avoid slipping – Maintain proper footing and balance at all

times to avoid slipping or falling. Wear protective non-slip

footwear that will protect your feet and improve your footing

on slippery surfaces. Exercise caution when changing

direction and operating the tool on slopes.

14. Use safety glasses – Thrown objects can cause serious

injury to the eyes. Always wear safety glasses or eye

shields during operation and while making any adjustments

or repairs.

15. Remove the battery – Stop the weed sweeper and remove

the battery when it is not in use, before servicing it, when

changing accessories, and when performing any other

maintenance. Wait until the brush has come to a complete

stop and the housing has cooled down.

16. Store indoors – When not in use, the cordless weed

sweeper should be stored indoors in a dry and high or

locked-up place out of the reach of children.

17. Maintain the cordless weed sweeper with care –

Keep the brushes clean for optimal performance and to

reduce the risk of injury. Keep the handles dry, clean,

and free from oil and grease. Follow the additional

recommendations described in the maintenance section of

this manual.

18. Avoid dangerous environments – Do not use the weed

sweeper in rain or in damp or wet locations. Do not operate

the weed sweeper in gaseous or explosive atmospheres

or use the weed sweeper near flammable or combustible

liquids. The motor or brushes may spark, and the sparks

might ignite fumes.

19. Stay alert – Watch what you are doing. Use common

sense. Do not operate the cordless weed sweeper when

you are tired or under the influence of drugs, alcohol, or

other medication.

20. Check for damaged parts – Before further use of the

appliance, a guard or other part that is damaged should be

carefully checked to determine that it will operate properly

and perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other condition that may affect its

operation. A guard or other part that is damaged should

be properly repaired or replaced. Contact the Snow Joe

Sun Joe

customer service center at 1-866-SNOWJOE (1-

866-766-9563) for assistance.

21. Noise and vibrations – Observe any noise-prevention

regulations. If the cordless weed sweeper should start

to vibrate abnormally, stop the machine and inspect it

thoroughly for damage.

Maintenance + Storage

mWARNING! Do not use detergents, acids, alkaline

solutions, bleaches or solvents such as acetone to clean your

weed sweeper. These substances may damage the plastic

housing of the machine.

Regularly check the following:

• Brushes are clear and can spin freely – Accumulation

of debris around the brush could impair performance or

damage the motor. Inspect and clean the area around the

brush before every use.

• Safety devices are operating properly –

Do not tamper with or adjust safety devices.

• Bolts and screws are properly tightened –

Visually inspect the machine for any damage and ensure

that the cordless weed sweeper is in safe working

condition.

• Use only identical replacement parts –

Always replace damaged parts with original equipment

manufacturer’s (OEM) parts only. Replacement parts that

do not meet the original equipment specifications may lead

to improper performance and compromise safety.

Battery & Charger

Safety Instructions

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only be

guaranteed if undamaged cells are used. Incorrect handling of

the battery pack can cause cell damage.

IMPORTANT! Analyses conﬁrm that incorrect use and poor care

of high-performance batteries are the main factors responsible

for product damage and/or personal injury.

mWARNING! Use only approved replacement batteries;

other batteries may damage the power tool and cause it to

malfunction, which can lead to serious personal injury.

mWARNING! Do not use a battery pack or appliance that

is damaged or modified. Damaged or modified batteries may

exhibit unpredictable behavior resulting in fire, explosion or risk

of injury.

Do not modify or attempt to repair the appliance or the battery

pack except as indicated in the instructions for use and care.

Have your battery pack serviced by a qualiﬁed repair person

using only identical replacement parts. This will ensure that the

safety of the battery pack is maintained.

mCAUTION! To reduce the risk of injury, use only official

iON+ 24V designated chargers with the iON+ 24V battery pack.

The use of other batteries or chargers poses a risk of fire,

personal injury and damage. Do not wire a battery pack to a

power supply plug or car cigarette lighter, as such misuse will

permanently disable or damage the battery pack.

mWARNING! To reduce the risk of electric shock,

always unplug the charger before performing any cleaning or

maintenance. Do not allow water to flow into the charger. Use a

Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards.

1. Prevent unintentional starting – Ensure the trigger is not

pressed before connecting the battery pack, picking up or

carrying the power tool. Carrying the weed sweeper with

your finger on the trigger may result in an accident.

2. Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or flammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a fire.

3. Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open flames near a

charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the battery is

41°F (5°C) to 105°F (40.5°C). Do not charge the battery

outside in freezing weather; charge it at room temperature.

4. Maintain charger cord – When unplugging the charger,

pull the plug, not the cord from the receptacle to reduce the

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Fejemaskine
Model:	24V-CTC-CT

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-CTC-CT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fejemaskine Sun Joe Manualer

Sun Joe 24V-CTC-CT Manual

30 December 2025

Sun Joe SJSW26M-RM Manual

30 Juli 2024

Sun Joe 20VIONLTE-BLW-RM Manual

29 Juli 2024

Sun Joe SWP27M Manual

15 April 2024

Sun Joe 24V-CTC-LTE Manual

8 November 2023

Sun Joe 20ViONLT-BLW-RM Manual

19 Oktober 2023

Fejemaskine Manualer

Nyeste Fejemaskine Manualer

Lavor COMFORT XS-R1 ESSENTIAL Manual

12 August 2025

Lavor READY 32B Li Manual

12 August 2025

Pyle PMCSR24 Manual

9 August 2025

Lavor SWL R 950 Manual

30 Juli 2025

Guede GKM 18-0 Manual

24 Juli 2025

Numatic TBL4045 Manual

23 Juli 2025

Numatic TBL4055T Manual

23 Juli 2025

Numatic TVL850 Manual

23 Juli 2025

Lavor COMFORT M 102 Manual

22 Juli 2025

Lavor BSW 950 MF Manual

22 Juli 2025