Sun Joe 24V-X2-CS16-CT-RM Manual

Sun Joe Sav 24V-X2-CS16-CT-RM

Læs gratis den danske manual til Sun Joe 24V-X2-CS16-CT-RM (28 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Sun Joe 24V-X2-CS16-CT-RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-X2-CS16-CT-RM Form No. SJ-24V-X2-CS16-CT-RM-880E-M-V1

RCORDLESS CHAIN SAW – TOOL ONLY

48-VOLT MAX* | 16-INCH

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-X2-CS16-CT-RM Form No. SJ-24V-X2-CS16-CT-RM-880E-M-V1

RCORDLESS CHAIN SAW – TOOL ONLY

48-VOLT MAX* | 16-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all safety warnings and all instructions. Failure to follow

the warnings and instructions may result in electric shock, re

and/or serious injury. Save all warnings and instructions for

future reference.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

Intended Use

This cordless chain saw was designed and manufactured for

trimming and pruning tree limbs and branches and for cutting

smaller logs up to recommended 14.5 inch (36.8 cm), not to

exceed a max. cut of 15.5 in. (39.4 cm) in diameter depending

on type of wood. All of the wooden objects intended to be cut

with this chain saw should be no thicker than the guide bar's

maximum cutting capabilities.

Improper Use

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Examples of improper use

include, but are not limited to:

• Trimming hedges;

• Carving;

• Sectioning pallets, crates, and various packing materials;

• Sectioning furniture or other materials with nails, screws, or

other metal components;

• Butchering meat;

• Using the machine to lift, move, or split objects;

• Using the machine while fastened to xed supports.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities. The user will

consequently be liable for all and any damage or injury to

himself/herself or others.

General Safety

mWARNING! When using cordless yard tools, basic

safety precautions should always be followed to reduce the

risk of re, electric shock, and personal injury, including

the following:

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust – Power tools create sparks which may ignite the

dust or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electric Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions

– Water entering a power tool will increase the risk of

electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Sav
Model:	24V-X2-CS16-CT-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-X2-CS16-CT-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Sun Joe Manualer

Sun Joe SWJ802E-PRP Manual

14 November 2024

Sun Joe 24V-CSSHRP-CT-RM Manual

1 Januar 2024

Sun Joe SWJ599E-RM Manual

24 December 2023

Sun Joe 24V-PS10-CT Manual

24 December 2023

Sun Joe SWJ800E-RM Manual

16 December 2023

Sun Joe 24V-CSSHRP-LTE-RM Manual

22 November 2023

Sun Joe ION16CS-RM Manual

26 August 2023

Sun Joe 20VION-CS10-RM Manual

22 August 2023

Sun Joe 24V-PS10-LTE-RM Manual

5 August 2023

Sun Joe ION8PS2-CT-RM Manual

1 August 2023

Sav Manualer

Nyeste Sav Manualer

Dremel CS12V Manual

13 Juni 2025

Metabo BAS 505 Precision WNB Manual

9 Juni 2025

Mega 64000 Manual

9 Juni 2025

Metabo ST 18 LT 130 Manual

8 Juni 2025

Metabo STB 18 LT 130 Manual

8 Juni 2025

Metabo BAS 505 Precision DNB Manual

7 Juni 2025

Draper 70833 Manual

7 Juni 2025

Draper 83677 Manual

6 Juni 2025

Draper Storm Force 98445 Manual

6 Juni 2025

Draper Expert 57489 Manual

6 Juni 2025