Sun Joe SWJ800E-RM Manual

Sun Joe Sav SWJ800E-RM

Læs gratis den danske manual til Sun Joe SWJ800E-RM (20 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Sun Joe SWJ800E-RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model SWJ800E-RM Form No. SJ-SWJ800E-RM-880E-MR9-V3

ELECTRIC POLE CHAIN SAW

8-INCH | 6.5-AMP

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

General Safety

mWARNING! When using electric yard tools, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury, including the following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Remove adjusting keys and wrenches – Check that

adjusting wrenches are removed from the saw before

turning it on.

3. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session. Cluttered

areas invite accidents.

4. Do not use in dangerous environments – Do not use the

pole chain saw in damp or wet locations.

5. Do not use the pole chain saw in the rain.

6. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

7. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

8. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which they were

not designed.

9. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Use of heavy-duty rubber gloves,

substantial non-skid footwear, and close-tting clothing is

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair.

11. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out microscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance

at all times.

14. Maintain tools with care – Keep tools sharp and clean

for best and safest performance. Follow instructions for

lubricating and changing accessories.

15. Disconnect tool – Disconnect the pole chain saw from

the power supply when not in use, before servicing,

when transporting, or when changing the chain or other

accessories.

16. Reduce the risk of unintentional starting – Make sure

the switch is in the OFF position before plugging the tool

into a power source.

17. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

18. Check for damaged parts – Before each use, repair or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts, and any other conditions that

may aect the tool's operation.

19. Never leave tool unattended while it is running –

Turn the power OFF by removing the power cord directly

from its socket. Do not leave the saw until the cutting

chain comes to a complete stop.

20. Avoid unintentional starting – Do not carry the pole

chain saw with your nger on the switch.

21. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure to

encase the cutting bar in its protective sheath when not

in use.

22. Stay alert – Watch what you are doing. Use common

sense. Do not operate the pole chain saw when you are

tired.

23. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model SWJ800E-RM Form No. SJ-SWJ800E-RM-880E-MR9-V3

ELECTRIC POLE CHAIN SAW

8-INCH | 6.5-AMP

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Sav
Model:	SWJ800E-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe SWJ800E-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Sun Joe Manualer

Sun Joe 24V-HCSWP-6-LTE Manual

29 Juli 2025

Sun Joe SWJ802E-PRP Manual

14 November 2024

Sun Joe 24V-CSSHRP-CT-RM Manual

1 Januar 2024

Sun Joe SWJ599E-RM Manual

24 December 2023

Sun Joe 24V-PS10-CT Manual

24 December 2023

Sun Joe SWJ800E-RM Manual

16 December 2023

Sun Joe 24V-CSSHRP-LTE-RM Manual

22 November 2023

Sun Joe ION16CS-RM Manual

26 August 2023

Sun Joe 20VION-CS10-RM Manual

22 August 2023

Sun Joe 24V-PS10-LTE-RM Manual

5 August 2023

Sav Manualer

Nyeste Sav Manualer

Scheppach KS1200 Manual

1 August 2025

RYOBI CS-1835 Manual

31 Juli 2025

Guede KS 450-55 Manual

31 Juli 2025

RYOBI CS-4016 Manual

31 Juli 2025

RYOBI RRS1801M Manual

31 Juli 2025

Skil 3540 CA Manual

31 Juli 2025

RYOBI One+ RPLS18X Manual

31 Juli 2025

RYOBI One+ RMS18254X Manual

31 Juli 2025

RYOBI RTBS18X Manual

31 Juli 2025

RYOBI CS-2240 Manual

31 Juli 2025