Sun Joe 24V-HCSWP-6-LTE Manual

Sun Joe Sav 24V-HCSWP-6-LTE

Læs gratis den danske manual til Sun Joe 24V-HCSWP-6-LTE (20 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Sun Joe 24V-HCSWP-6-LTE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

Model 24V-HCSWP-6-LTE Form No. SJ-24V-HCSWP-6-LTE-880E-M

OPERATOR’S MANUAL

CORDLESS TELESCOPING

POLE + PRUNING SAW

24V* IONMAX | 2.0 Ah | 6-INCH

Original instructions.

A Division of Snow Joe, LLC

*DISCLAIMER: Initial no-load voltage, when fully charged,

peaks at 24V; nominal voltage under typical load is 21.6V.

SAVE THESE INSTRUCTIONS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may result

in serious bodily injury or death.

General Safety

mWARNING! This appliance is not intended for use

by children or by unassisted, unsupervised persons whose

physical, sensory or mental capabilities prevent them from using

it safely. Children should be supervised to ensure that they do

not play with the appliance.

Before starting up your machine, please check it carefully

for any defects. If you ﬁnd any, do not start up your machine.

Contact your authorized Snow Joe

+ Sun Joe

dealer or

call the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

mWARNING! When using the power tool, basic safety

precautions should always be followed to reduce the risk of ﬁre,

electric shock, and personal injury. These include:

1. Keep work area clean and well-lit – Cluttered, dark areas

invite accidents. Always inspect the area where the pole +

pruning saw is to be used.

2. Avoid dangerous environments – Do not use the power

tool in rain, in damp or wet locations, or in bad weather,

especially when there is a risk of lighting. This decreases the

risk of being struck by lighting. Do not operate the power tool

in gaseous or explosive atmospheres or use the power tool

near flammable or combustible liquids. Motors in these tools

may spark, and the sparks might ignite fumes.

3. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls.

4. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe distance

away from the work area.

5. Dress properly – Do not wear loose clothing or jewelry. They

can get caught in moving parts. Protective rubber gloves and

non-slip footwear are recommended when working outdoors.

6. Avoid Slipping – Exercise caution to avoid slipping or falling.

Wear protective footwear that will protect your feet and

improve your footing on slippery surfaces.

7. Stay alert – Watch what you are doing. Use common sense.

Do not operate the power tool when you are tired,

or under the influence of alcohol or drugs.

8. Do not overreach – Keep proper footing and balance at

all times.

9. Prevent unintentional starting – Do not pull the trigger

before connecting to battery pack, picking up or

carrying the appliance. Do not carry the pole + pruning

saw with your finger on the trigger.

10. Use the right appliance – Do not use the power tool for any

applications other than those for which it was intended.

11. The chain is sharp – Don't grasp the exposed chain or

cutting edges when picking up or holding the power tool.

12. Use two hands – Hold the telescoping pole and handle with

both hands to avoid loss of control.

13. Remove the battery – Remove the battery from the power

tool when it is not in use, before servicing it, when changing

accessories, and when performing any other maintenance

task.

14. Use safety glasses – Also use safety footwear, snug-fitting

clothing, protective gloves, hearing and head protection.

15. Use head protection – Always use head protection when

operating the power tool overhead. Falling debris can result

in serious personal injury.

16. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at the

rate for which it was designed.

17. Check for damaged parts – Before further use of the

appliance, all guards and parts should be carefully checked

to determine that it will operate properly and perform its

intended function. Check for alignment of moving parts,

binding of moving parts, breakage of parts, mounting, and

any other condition that may affect its operation. A guard

or other part that is damaged should be properly repaired

or replaced. Contact the Snow Joe

+ Sun Joe

customer

service center at 1-866-SNOWJOE (1-866-766-9563) for

assistance.

18. Maintain the power tool with care – Keep the cutting edges

sharp and clean for optimal performance and to reduce the

risk of injury. Keep the handles dry, clean, and free from

oil and grease. Follow the additional recommendations

described in the maintenance section

of this manual.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Sav
Model:	24V-HCSWP-6-LTE

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-HCSWP-6-LTE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Sun Joe Manualer

Sun Joe BDL-A0203 Manual

10 August 2025

Sun Joe 20VIONLTE-PS8-RM Manual

10 August 2025

Sun Joe 24V-HCSWP-6-LTE Manual

29 Juli 2025

Sun Joe SWJ802E-PRP Manual

14 November 2024

Sun Joe 24V-CSSHRP-CT-RM Manual

1 Januar 2024

Sun Joe SWJ599E-RM Manual

24 December 2023

Sun Joe 24V-PS10-CT Manual

24 December 2023

Sun Joe SWJ800E-RM Manual

16 December 2023

Sun Joe 24V-CSSHRP-LTE-RM Manual

22 November 2023

Sun Joe ION16CS-RM Manual

26 August 2023

Sav Manualer

Nyeste Sav Manualer

RIKON 10-1414 Manual

1 November 2025

RIKON 10-3062 Manual

31 Oktober 2025

Dedra DED7338 Manual

31 Oktober 2025

SereneLife PSLTLL1516 Manual

19 Oktober 2025

Proviel HFS 518 Manual

16 Oktober 2025

Proviel TK 600 Manual

16 Oktober 2025

Hurricane ES 2040/1 S Manual

16 Oktober 2025

Hurricane MKS 38/41 Manual

16 Oktober 2025

Alpha Tools TK 1500 E Manual

13 Oktober 2025

Alpha Tools KS 250 Manual

13 Oktober 2025