Sun Joe ION8PS2-CT-RM Manual

Sun Joe Sav ION8PS2-CT-RM

Læs gratis den danske manual til Sun Joe ION8PS2-CT-RM (28 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Sun Joe ION8PS2-CT-RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

A Division of Snow Joe

®, LLC Model iON8PS2-CT-RM Form No. SJ-iON8PS2-CT-RM-880E-V1

OPERATOR’S MANUAL

CORDLESS POLE CHAIN SAW

8-INCH | 40-VOLT MAX*

THANKS FOR YOUR PURCHASE

OF A REMANUFACTURED PRODUCT.

snowjoe.com

To make sure you get the most out of

your

product, be sure to register online at

to enjoy full product support.

PASTE UPC LABEL HERE

®, LLC

A Division of Snow Joe

®, LLC Model iON8PS2-CT-RM Form No. SJ-iON8PS2-CT-RM-880E-V1

OPERATOR’S MANUAL

CORDLESS POLE CHAIN SAW

8-INCH | 40-VOLT MAX*

SAVE THESE INSTRUCTIONS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

General Safety

mWARNING! When using cordless yard tools, basic

safety precautions should always be followed to reduce the

risk of re, electric shock and personal injury, including the

following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session. Cluttered

areas invite accidents.

3. Do not use in dangerous environments – Do not use

power tools in damp or wet locations.

4. Do not use the pole chain saw in the rain.

5. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

6. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

7. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which they were

not designed.

8. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Use of heavy-duty rubber gloves,

substantial non-skid footware and close-tting clothing is

recommended when working outdoors with power tools.

9. Wear protective hair coverings to contain long hair.

10. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

11. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out miscoscopic particles is recommended.

12. Do not overreach – Keep proper footing and balance

at all times.

13. Maintain tools with care – Keep tools sharp and clean

for best and safest performance. Follow instructions for

lubricating and changing accessories.

14. Disconnect tool – Turn o the power switch and remove

the battery when it is not in use, before servicing, clearing

jammed material, when transporting or when changing the

chain or other accessories.

15. Reduce the risk of unintentional starting – Make sure

the safety switch and the trigger switch are in the OFF

position before inserting the battery in the unit. Do not

carry the pole chain saw with the safety switch and the

trigger switch engaged.

16. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

17. Check for damaged parts – Before each use, repair or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts and any other conditions that

may aect the tool's operation. A guard or other part that

is damaged should be properly repaired or replaced by an

authorized service center.

18. Never leave tool unattended while it is running –

Turn the power OFF by removing the battery from the

unit. Do not leave the saw until the cutting bar comes to a

complete stop.

19. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure to

encase the cutting bar in its protective sheath when not

in use.

20. Stay alert – Watch what you are doing. Use common

sense. Do not operate the pole chain saw when you

are tired.

21. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Sav
Model:	ION8PS2-CT-RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe ION8PS2-CT-RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Sun Joe Manualer

Sun Joe BDL-A0203 Manual

10 August 2025

Sun Joe 20VIONLTE-PS8-RM Manual

10 August 2025

Sun Joe 24V-HCSWP-6-LTE Manual

29 Juli 2025

Sun Joe SWJ802E-PRP Manual

14 November 2024

Sun Joe 24V-CSSHRP-CT-RM Manual

1 Januar 2024

Sun Joe SWJ599E-RM Manual

24 December 2023

Sun Joe 24V-PS10-CT Manual

24 December 2023

Sun Joe SWJ800E-RM Manual

16 December 2023

Sun Joe 24V-CSSHRP-LTE-RM Manual

22 November 2023

Sun Joe ION16CS-RM Manual

26 August 2023

Sav Manualer

Nyeste Sav Manualer

Draper CSP5250 Manual

10 August 2025

Stihl MSA 220 C Manual

9 August 2025

Black Decker 7552 Manual

9 August 2025

Draper CSP4546 Manual

9 August 2025

DeWalt DCS572 Manual

9 August 2025

DeWalt DCS576 Manual

9 August 2025

Stihl MSA 70 C Manual

9 August 2025

DeWalt DCMCS575 Manual

9 August 2025

Stihl MS 212 Manual

9 August 2025

Stihl MS 182 Manual

9 August 2025