Sun Joe PJ3600C Manual

Sun Joe Ikke kategoriseret PJ3600C

Læs gratis den danske manual til Sun Joe PJ3600C (44 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Sun Joe PJ3600C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/44

®, LLC

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model PJ3600C Form No. SJ-PJ3600C-880E-MR6

CORDLESS PRUNER

3.6V MAX* | 2.0 Ah | RECHARGEABLE

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

Notice the personal safety alert symbol used in this manual m

to draw your attention to a WARNING given along with the

particular operating instruction. This means that the operation

requires special ATTENTION CAUTION AWARENESS, , and .

When using this power tool, basic safety precautions,

including the following, should always be followed to reduce

the risk of re, electric shock, personal injury and material

damage.

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

mWARNING! The cutting blades can cut you. Keep hands

and feet away from the blades and the cutting area.

Retain this manual for future reference and reread it at the start

of each trimming season.

mWARNING! This battery-operated power tool must be

recharged only with the specic charging unit for the battery.

A charging unit that may be suitable for one type of battery

may create a risk of re when used with another battery type.

• Avoid accidental starting.

• When the tool is not in use, keep it away from other metal

objects.

• Before operating the tool, read the entire manual carefully

and make sure you know how to switch the tool OFF in an

emergency.

Work Area Safety

1. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust. Power tools create sparks which may ignite the

dust or fumes.

3. Keep bystanders and children away. All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

4. Avoid dangerous environment. Don't use the appliance

in wet or damp location.

Electrical Safety

1. If the battery charger cable is damaged, please call the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563).

2. If charging the power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected power supply. The using of an RCD reduces the

risk of electric shock.

3. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any earthed (grounded)

power tools or battery chargers. Unmodied plugs and

matching outlets will reduce risk of electric shock.

4. Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

5. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

6. Do not abuse the charging cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of

electric shock.

7. Battery charger is for indoor use only. Only charge this

battery-powered tool indoors.

Personal Safety

1. Stay alert. Watch what you are doing and use common

sense when operating a power tool. Do not use the

power tool while you are tired or under the inuence of

drugs, alcohol or medication. A moment of inattention

while operating power tool may result in serious personal

injury.

2. Use personal protective equipment. Always wear eye

protection. Protective equipment such as safety glasses,

a dusk mask, non-skid safety shoes, a hard hat,

and hearing protection, when used for appropriate

conditions, will reduce the possibility of personal injuries.

3. Avoid unintentional starting. Ensure the switch is in the

OFF position before connecting to the power source/

battery charger, or before picking up or carrying the tool.

Carrying power tools with your nger on the switch or

charging power tools with the switch ON can lead to

accidents.

4. Do not overreach. Keep proper footing and balance at

all times. This enables better control of the power tool in

unexpected situations.

5. Dress properly. Do not wear loose clothing or jewelry.

Dangling articles such as these can become caught in

moving parts. Using work gloves and substantial footwear

is recommended when working outdoors. Wear

a protective hair covering to contain long hair.

6. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of these devices can

reduce dust related hazards.

Power Tool Use and Care

1. Do not force the appliance. It will do the job better with

less likelihood of injury if it is used at the rate for which it

was designed.

2. Do not use the appliance for any Use the right appliance.

job except that for which it is intended.

3. Do not use the power tool if the switch does not turn

it on and o. Any power tool that cannot be controlled by

the switch is dangerous and must be repaired.

4. Disconnect the battery pack from the power tool

before making any adjustments, changing accessories

or storing the power tool. Such preventative safety

measures reduce the risk of starting the power tool

accidentally.

5. Store idle appliances indoors. When not in use,

appliances should be stored indoors in a dry and high or

locked-up place out of the reach of children.

6. Maintain appliance with care. Check for misalignment or

binding of moving parts, breakage of parts and any other

condition that may aect the power tool's operation.

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power

tools.

7. Properly Keep cutting blades sharp and clean.

maintained cutting blades with sharp edges are less likely

to bind and are easier to control.

8. Use the power tool and accessories in accordance

with these instructions and in the manner intended

for the particular use of the power tool, taking into

account the working conditions and the work to be

performed. Using the power tool for operations dierent

from those intended could result in a hazardous situation.

9. Keep all parts of the body away from the cutting blade.

Do not remove cut material or hold material to be cut

when blades are moving. Make sure the switch is o when

clearing jammed material. A moment of inattention while

operating the product may result in serious personal injury.

10. Carry the product by the handle with the cutting blade

stopped. When transporting or storing the product always

t the cutting device cover. Proper handling of the product

will reduce possible personal injury from the cutter blades.

Service

1. If your power tool requires service, contact an

authorized Snow Joe® + Sun Joe® dealer or call the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563). Only identical

replacement parts should be utilized for repairs. This will

ensure that the safety of the power tool is maintained.

2. If the battery charger cable is damaged, it must be

immediately replaced to avoid a hazard.

Contact the Snow Joe® + Sun Joe® customer service

center at 1-866-SNOWJOE (1-866-766-9563) for

assistance.

Battery Safety Warnings

This manual contains important safety and operating

instructions for your battery and charger.

1. Before using, always check the charger, cable and

plug. If defects are detected, do not use the charger;

never open the charger. Thoroughly read all instructions

and cautionary markings on the manual, the charger,

and the cordless pruner.

mWARNING! If the cordless pruner housing is cracked or

damaged, do not insert the charging adapter into the power

tool or plug the power tool into the mains outlet. There is a

danger of electric shock or electrocution.

2. Protect the battery charger from rain and moisture.

Water penetration in a battery charger increases the risk

of electric shock.

3. Only use the included battery for this unit.

4. Do not open or modify the battery. Release electrolyte is

corrosive and may cause damage to eyes and skin.

It may be toxic if swallowed.

5. Keep the battery charger clean. Contamination may

increase the risk of electric shock.

6. Do not short circuit. A battery pack will short circuit if a

metal object makes a connection between the positive

and negative contacts on the battery pack. Do not place a

battery pack near anything that may cause a short circuit,

such as paper clips, coins, keys, screws, nails and other

metallic objects. A short-circuited battery pack poses a

risk of re and severe personal injury.

7. This charger is ONLY intended to charge the rechargeable

battery inside of the cordless pruner. Any other use poses

a risk of re, electric shock or electrocution.

8. Do not place any object on top of the charger or place

the charger on a soft surface that may result in excessive

internal heat. Keep the charger away from any heat

source.

9. To reduce the risk of damaging the electric plug and

cord, pull the plug, not the cord, when disconnecting the

charger from the electric outlet.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Ikke kategoriseret
Model:	PJ3600C

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe PJ3600C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Sun Joe Manualer

Sun Joe SJ-EWB Manual

10 August 2025

Sun Joe 24V-LT12-LTE Manual

19 Juli 2025

Sun Joe 24VCHRG-HS-DPC Manual

18 Juni 2025

Sun Joe 24V-HCS-4-LTE Manual

7 Januar 2025

Sun Joe SPX-PWB1 Manual

7 Januar 2025

Sun Joe 24VBAT-XR8 Manual

6 Januar 2025

Sun Joe SJFP30 Manual

6 Januar 2025

Sun Joe SBJ6-GA Manual

6 Januar 2025

Sun Joe GGNP-S3 Manual

6 Januar 2025

Sun Joe SJ-APS-022 Manual

6 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM SU9030 Manual

13 September 2025

IFM O2U554 Manual

13 September 2025

Speco Technologies HTi70TM Manual

13 September 2025

QSC RMXa Manual

13 September 2025

Tineco Floor One S2 Series Manual

13 September 2025

Tineco Floor One S3 Breeze Manual

13 September 2025

Tineco Floor One S5 Steam Manual

13 September 2025

Osram VX500-CB Manual

13 September 2025

Zelmer ZTS7990 Manual

13 September 2025

Osram VX250-SP Manual

13 September 2025