Sun Joe SJ-EWB Manual

Sun Joe Ikke kategoriseret SJ-EWB

Læs gratis den danske manual til Sun Joe SJ-EWB (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Sun Joe SJ-EWB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

, LLC

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

, LLC Model SJ-EWB Form No. SJ-SJ-EWB-880E-M

OPERATOR’S MANUAL

ELECTRIC WEED

BURNER + BBQ LIGHTER

1500W | 550°C MAX. TEMP

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in electric shock, fire and/or serious injury.

Product Description

This electric weed burner + BBQ lighter is intended for

household use only. It is not intended for commercial use.

It is designed for removing of weeds between paving slabs,

paved surfaces, walls, and in lawns and ower beds.

In addition, the device may also be used to light charcoal

for barbecues. Always follow the instructions and warnings

stipulated by the barbecue manufacturer.

General Safety

mWARNING! This tool is not intended for use by children

or by unassisted, unsupervised persons whose physical,

sensory or mental capabilities prevent them from using it

safely. Children should be supervised to ensure that they do

not play with the tool.

Before starting up your tool, please check it carefully for any

defects. If you find any, do not start up your tool. Contact your

authorized Snow Joe

+ Sun Joe

dealer or call the Snow Joe

+ Sun Joe

customer service center at 1-866-SNOWJOE

(1-866-766-9563).

mWARNING! When using the power tool, basic safety

precautions should always be followed to reduce the risk of

fire, electric shock, and personal injury. These include:

• Know your product – Know how to start and stop the

tool. Be thoroughly familiar with the controls and ensure

they are functioning properly.

• Use the right tool – Do not use this tool for any job

except that for which it was intended.

• Hot surfaces – Wear gloves and avoid contact with

any hot surfaces. Do not allow hot surfaces to touch

ammable materials. Always set it down on the kick stand.

• Avoid unintentional starting – Do not carry a plugged-in

tool with your hand on the switch. Make sure the switch is

off before plugging in the tool.

• Burning hazard – Ensure that the nozzle of the burner

+ lighter is not blocked, and is pointed down and away

from yourself before turning it on. Never point the tool at

yourself, others, the power cord or flammable materials.

• Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

• Do not run – Never run while operating the tool.

• Avoid slipping – Maintain proper footing and balance

at all times to avoid slipping or falling. Wear non-slip

footwear to improve your footing on slippery surfaces.

• Avoid water - Do not expose the burner + lighter to rain,

damp or wet conditions. Do not immerse in water. Water

entering the unit will increase the risk of electric shock.

• Stay alert – Watch what you are doing. Use common

sense. Do not operate the burner + lighter when you are

tired or under the influence of drugs, alcohol, or other

medication.

• Unplug the tool – Unplug the burner + lighter when it is

not in use, before servicing, and when performing any

other maintenance task. Never leave the tool unattended

while switched on. In the event of an accident or

breakdown, switch off the tool immediately.

• Noise and vibrations – If the burner + lighter should

start to vibrate abnormally, stop the tool and inspect it

thoroughly for damage.

• Inspect the tool – Visually inspect the tool for any loose

fasteners or blocked vents.

• Use with care – A fire may arise if the tool is not used

with care. Avoid dropping or subjecting it to strong

impacts or sharp objects. Take the tool away from burning

charcoal once lit.

• Overheating – Do not apply heat on one area for more

than 3

5 minutes at a time. Allow the burner + lighter to

cool for 15 minutes after 15 minutes of continuous use.

• Storage – Do not store or leave the tool outdoors.

• Lighting charcoal – Maintain a distance of around 1 in.

(2.5 cm) between the tool and the charcoal.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Ikke kategoriseret
Model:	SJ-EWB

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe SJ-EWB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Sun Joe Manualer

Sun Joe SPX-SC17 Manual

8 Oktober 2025

Sun Joe SPX-SC14 Manual

8 Oktober 2025

Sun Joe SJ-EWB Manual

10 August 2025

Sun Joe 24V-LT12-LTE Manual

19 Juli 2025

Sun Joe 24VCHRG-HS-DPC Manual

18 Juni 2025

Sun Joe 24V-HCS-4-LTE Manual

7 Januar 2025

Sun Joe SPX-PWB1 Manual

7 Januar 2025

Sun Joe 24VBAT-XR8 Manual

6 Januar 2025

Sun Joe SJFP30 Manual

6 Januar 2025

Sun Joe SBJ6-GA Manual

6 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Dahua Technology DHL32-F600 Manual

28 Oktober 2025

Dahua Technology VTS5240B Manual

28 Oktober 2025

Dahua Technology HAC-HFW1230S-POC Manual

28 Oktober 2025

Dahua Technology HAC-HDW1400TLMQ-A Manual

28 Oktober 2025

Dahua Technology EVS7124D Manual

27 Oktober 2025

Dahua Technology XVR7816S-4KL-X-LP Manual

27 Oktober 2025

Dahua Technology HAC-HDW1220EM Manual

27 Oktober 2025

Dahua Technology ISC-M6550 Manual

27 Oktober 2025

Dahua Technology EVS7148D Manual

27 Oktober 2025

Dahua Technology HAC-HFW2249E-A Manual

27 Oktober 2025