Sun Joe 24V-LT12-LTE Manual

Sun Joe Ikke kategoriseret 24V-LT12-LTE

Læs gratis den danske manual til Sun Joe 24V-LT12-LTE (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Sun Joe 24V-LT12-LTE, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
Model 24V-LT12-LTE
Form No. SJ-24V-LT12-LTE-800E-FTY-M
CORDLESS TRIMMER + EDGER
24V* IONMAX
TM
| 2.0 Ah | 12 INCH | 2-IN-1
R
OPERATOR’S MANUAL
Original instructions.
*Initial no-load voltage, when fully charged, peaks at 24V;
nominal voltage under typical load is 21.6V.
SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe, LLC
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
mCAUTION!
Before using this cordless tool, carefully read and observe the
safety rules and instructions listed below. Before starting work,
make sure that you know how to stop the machine in case of
an emergency. The incorrect use of this machine could cause
serious injury. Keep these instructions in a safe place and on
hand so that they can be consulted when required.
mCAUTION!
The cordless grass trimmer + edger should only be used for
cutting lawns and for trimming along the borders of flower beds.
Other uses of the trimmer + edger that are not indicated in these
instructions could damage the trimmer + edger or seriously
injure the operator.
GENERAL Safety Rules
mWARNING! When using the cordless grass trimmer
+ edger basic safety precautions should always be followed
to reduce the risk of fire, electric shock, and personal injury,
including the following:
1. Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to battery pack, picking up
or carrying the appliance. Carrying the appliance with your
finger on the switch or energizing appliance that have the
switch on invites accidents.
2. Disconnect the battery pack from the appliance before
making any adjustments, changing accessories, or storing
appliance. Such preventive safety measures reduce the risk
of starting the appliance accidentally.
3. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
4. Use appliances only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
5. When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
6. Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
7. Do not use a battery pack or appliance that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.
8. Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
9. Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature range
specified in the instructions. Charging improperly or at
temperatures outside of the specified range may damage
the battery and increase the risk of fire.
10. Have servicing performed by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
11. Do not modify or attempt to repair the appliance or the
battery pack (as applicable) except as indicated in the
instructions for use and care.
12. Replacement parts – When servicing, use only identical
replacement parts.
13. Avoid dangerous environments – Do not use appliances in
damp or wet locations. Do not use in rain.
14. Keep children and bystanders away – Children and other
spectators, including pets, should be kept at least 50 feet
(15 meters) away from the work area. When the grass is cut,
stones and debris contained in the grass can be picked up
by the trimmer + edger and dispersed into the air. These
flying projectiles can cause blindness or other bodily injury.
15. Dress properly – Always wear suitable clothing when using
the trimmer + edger to prevent head, hand, or feet injuries.
Do not wear loose clothing or jewelry. They can get caught
in moving parts.
16. Use safety glasses – Also use safety footwear,
snug-fitting clothing, protective gloves, hearing and
head protection.
2
17. Use the right tools – Do not use tools for any job except
that for which they are intended.
18. Do not force the tool – It will do the job better and with
less likelihood of injury if it is used at the rate for which it
was designed.
19. Do not overreach – Keep proper footing and balance at all
times.
20. Stay alert – Watch what you are doing. Use common sense.
Do not operate the trimmer + edger when you are tired, or
under the influence of alcohol or drugs.
21. Store idle tools indoors – When not in use, tools should
be stored indoors in a dry and high or locked-up place out
of the reach of children.
22. Maintain tools with care – Keep cutting edges sharp
and clean for best performance and to reduce the risk
of injury. Follow instructions for lubricating and changing
accessories. Inspect the trimmer + edger periodically and
replace if damaged. Repair the trimmer + edger only at an
authorized service facility. Keep handles dry, clean, and free
from oil and grease.
23. Checked for damaged parts – Before continuing to use
the trimmer + edger, a guard or other part that is damaged
should be carefully checked to determine that it will operate
properly and perform its intended function.
Check for the alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other condition
that may affect the trimmer + edger’s operation. A guard or
other part that is damaged should be properly repaired or
replaced by an authorized service center unless indicated
elsewhere in this manual.
ADDITIONAL SAFETY INSTRUCTIONS FOR
GRASS TRIMMER + EDGER
1. Keep guards in place and in working order.
2. Keep hands and feet away from the cutting area.
mWARNING! Never use steel blades or other devices.
Use of any other accessories or attachments will increase the
risk of injury.
mCAUTION! The safety guard is critical to the safety
of the operator and the safety of people standing within a safe
distance of the trimmer + edger. The safety guard keeps the
trimmer + edger in good working order and must always be in
place during operation.
• Do not try to stop the cutting device (line spool)
with your hands. Always let it come to a stop by itself.
mWARNING! After switching off the tool, the cutting
device (line spool) continues to rotate for a few seconds.
• Only use the original type of line spool. Do not
under any circumstances use metal line or nylon line
instead of line spool.
• Do not use the tool to cut grass which is not on the ground.
For example, do not cut grass growing on walls or rocks.
• Do not switch on the tool in an enclosed or poorly ventilated
space or in the presence of flammable and/or explosive
substances such as liquids, gases and powders.
• Only cut during broad daylight or with adequate
artificial light.
• Check that all grass cuttings and dirt have been removed
from the ventilation vents.
• Do not cross roads or gravel paths while the tool is
still running.
• When the tool is not in use, store it in a dry place and out of
reach of children.
• After use, remove the battery and check for damage. If you
have any doubt about the condition of the tool, contact an
authorized service center or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
• Only use the tool according to the instructions given
in this manual.
• Check regularly that the screws are tight.
• Do not try to repair the tool or access internal parts.
Contact an authorized service center or call the Snow Joe
®
+
Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
Battery + Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only be
guaranteed if undamaged cells are used. Incorrect handling of
the battery pack can cause cell damage.
IMPORTANT! Analyses confirm that incorrect use and poor care
of high-performance batteries are the main factors responsible
for personal and/or product damage.

Produkt Specifikationer

Mærke: Sun Joe
Kategori: Ikke kategoriseret
Model: 24V-LT12-LTE

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe 24V-LT12-LTE stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Sun Joe Manualer

Sun Joe

Sun Joe 24V-LT12-LTE Manual

19 Juli 2025
Sun Joe

Sun Joe 24VCHRG-HS-DPC Manual

18 Juni 2025
Sun Joe

Sun Joe 24V-HCS-4-LTE Manual

7 Januar 2025
Sun Joe

Sun Joe SPX-PWB1 Manual

7 Januar 2025
Sun Joe

Sun Joe 24VBAT-XR8 Manual

6 Januar 2025
Sun Joe

Sun Joe SJFP30 Manual

6 Januar 2025
Sun Joe

Sun Joe SBJ6-GA Manual

6 Januar 2025
Sun Joe

Sun Joe GGNP-S3 Manual

6 Januar 2025
Sun Joe

Sun Joe SJ-APS-022 Manual

6 Januar 2025
Sun Joe

Sun Joe 24VBAT-XR12 Manual

6 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Deity

Deity SPD-1 Manual

19 Juli 2025
ART

ART BT-DI Manual

19 Juli 2025
Hotone

Hotone Captain Sunset Manual

19 Juli 2025
Behringer

Behringer SM2001 Manual

19 Juli 2025
Abac

Abac G-201 Manual

19 Juli 2025
Klipsch

Klipsch KI-362-SMA-II Manual

19 Juli 2025
DeWalt

DeWalt DCMWSP660 Manual

19 Juli 2025
SWIT

SWIT BIVO-98 Manual

19 Juli 2025
Hotone

Hotone Blues Manual

19 Juli 2025
CTA Digital

CTA Digital ADD-USBPOSW Manual

19 Juli 2025