Sunstech RPDS200 Manual

Sunstech Radio RPDS200

Læs gratis den danske manual til Sunstech RPDS200 (8 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Sunstech RPDS200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

RP-DS200

INSTRUCTION MANUAL

AM/FM Portable Radio

INSTRUCTION MANUAL

Carefully read and understand instructions contained in this manual before operating the unit. Please refer to

this manual in case of doubts about functions of the product. Keep instructions for future reference.

Safety instructions

To reduce risk of fire and electric shock do not expose this unit to rain or moisture. To inform end user of

possible dangers on the apparatus or on its components the following symbols can be applied.

Power cord protection

To avoid any malfunctions of the unit and to protect against electric shock, fire or personal injury please

observe following instructions.

- Hold the plug firmly when connecting or disconnecting the AC power cord.

- Keep the AC cord away from heating appliances.

- Never put any heavy object on the AC power cord

- Do not attempt to repair or reconstruct the AC power cord in any way.

- Never make or change connections with the power switched on.

- Always make sure that power in your home can support power indicated in rating label of the unit or of its AC

adaptor.

- Do not overcharge multiple sockets or extension cables.

- During storm disconnect the unit from the mains.

- Do not use components or accessories different from the one supplied.

Placement

Do not expose the unit to direct sunlight, near radiators, in closed automobiles where it is possible to reach

high temperatures (over 35°), at high humidity levels (over 90%), in dusty areas as the internal parts may be

seriously damaged. Do not place the unit on sofa or carpet or near other objects but in a well-ventilated area.

Do not place the unit on an unstable surface to avoid falls and damage of the unit and of third party. Place the

unit in a horizontal and stable position, far from vibrations.

Non-use periods

When the unit is not being used, turn it off. When left unused for a long period of time the unit, the unit should

be unplugged from the household AC outlet and batteries should be taken out.

No finger or other objects inside

Touching internal parts of this unit is dangerous. Do not attempt to disassemble the unit. Do not put any

foreign object in the unit.

Keep away from water/magnet

Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilled into the unit, serious damage could

occur.

Never bring a magnet or magnetized object near the unit.

Stacking

Place the unit in horizontal position and do not place anything heavy on it.

Condensation

Moisture may form in the following conditions:

- Immediately after a heater has been turned on in a steamy or very humid room.

- When the unit is suddenly moved from a cold environment to a warm one.

If moisture forms inside the unit it may not operate properly. In this case turn on the power and wait about

one hour for the moisture to evaporate

DESCRIPTION

1. ANTENNA

2. LCD DISPLAY

3. MODE BUTTON

4. TUNING KNOB (TUNE+ / TUNE-)

5. SET BUTTON

6. RADIO ON / OFF BUTTON

7. PHONE JACK

8. VOLUME KNOB

9. ALARM 2 BUTTON

10. M- (MEMORY-) BUTTON

11. ALARM 1 BUTTON

12. M+ (MEMORY+) BUTTON

13. SNOOZE / SLEEP BUTTON

14. AM/FM BUTTON 19

15. BATTERY COMPARTMENT

16. SPEAKER

17. AC POWER SOCKET

18. HANDLE

19. RESET

THE NORMAL FUNCTION OF THE PRODUCT MAYBE DISTURBED BY STRONG ELECTRO

MAGNETIC INTERFERENCE. IF SO, SIMPLY RESET THE PRODUCT BY DISCONNECTING THE AC

PLUG TO RESUME NORMAL. IN CASE THE FUNCTION COULD NOT RESUME, PLEASE USE THE

PRODUCT IN OTHER LOCATION.

POWER OPERATION

THIS UNIT CAN BE OPERATION FOR BOTH AC 230V / 50HZ AND 4 X “AA” BATTERY (“AA” BATTERY

NOT INCLUDED). WHEN PLAYING THE UNIT BY BATTERIES, PLEASE DISCONNECT THE AC

POWER CORD FROM THE AC POWER SOCKET (17). PLEASE MAKE SURE THE POWER IS OFF,

WHEN YOU DISCONNECT THE POWER CORD. IF YOU FORGET THE TURN OFF THE POWER

WHEN YOU DISCONNECT THE POWER CORD, THE ELECTRICITY CURRENT WILL REMAIN IN LCD

DISPLAY. PLEASE PRESS RESET (19) AT THE BACK OF RADIO UNIT, THEN THE UNIT WILL RESET.

CONNECTING THE RADIO

PLUG THE AC CORD INTO THE AC POWER SOCKET (17). THEN PLUG THE ANOTHER END INTO

THE AC OUTLET. WHEN ELECTRICAL POWER HAS BEEN INTERRUPTED AND RESTORED, THE

CLOCK DISPLA (2) WILL DEFAULT THE CALENDAR AS 1 JANUARY 2009 12:00AM. Y

LCD BACKLIGHT

LCD BACKLIGHT WILL TURN ON BY PRESSING ANY BUTTON OF THE UNIT, THE BACKLIGHT WILL

TURN OFF AUTOMATICALLY AFTER 10 SECONDS.

TIME SETTING

TURN THE TUNE+ / - KNOB (4) TO SELECT 12 / 24 CLOCK DISPLAY FORMAT. PRESS THE SET

BUTTON (5) ONCE, THEN TURN THE TUNE +/- KNOB TO SET THE CORRECT HOUR. ONCE THE

HOUR IS SET, PRESS THE SET BUTTON (5) ONCE AGAIN, TURN THE TUNE +/- KNOB TO SET THE

CORRECT MINUTE. KEEP TURNING THE TUNE+/- KNOB (4) THE TIME WILL ADVANCE FAST

TUNING. PRESS THE SET BUTTON (5) AGAIN TO CONFIRM ONCE THE TIME IS SET. THE UNIT

WILL RETURN TO THE CLOCK MODE AUTOMATICALLY IF NO BUTTON IS PRESSED WITHIN 15

SECONDS.

CALENDAR SETTING

WHEN LCD DISPLAY SHOWS THE TIME, PRESS MODE BUTTON (3) ONCE, IT WILL SHOW

CALENDAR MODE. PRESS SET BUTTON (5) ONCE TO SELECT THE YEAR, TURN THE TUNE+/-

KNOB (4) TO SET THE CORRECT YEAR. PRESS SET BUTTON (5) AGAIN TO SELECT THE MONTH,

TURN THE TUNE +/- KNOB (4) TO SET THE MONTH. THEN PRESS SET BUTTON (5) AGAIN TO

SELECT THE DATE, TURN THE TUNE +/- KNOB (4) TO SET THE DAY. PRESS THE SET BUTTON (5)

The lightning flash with arrowhead symbol within an equilateral triangle is intended to

alert the user to the presence of uninsulated dangerous voltage.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

AGAIN TO CONFIRM ONCE THE CALENDAR IS SET. THE UNIT WILL RETURN TO THE CLOCK MODE

AUTOMATICALLY IF NO BUTTON IS PRESSED WITHIN 15 SECONDS.

RADIO OPERATION

PRESS RADIO ON/OFF BUTTON (6) TO TURN ON THE UNIT, TURN THE VOLUME KNOB (8) TO

ADJUST LISTENING LEVEL. PRESS AM/FM BUTTON (14) TO SELECT AM OR FM BAND, TURN THE

TUNE +/- KNOB (4) FOR THE DESIRED FREQUENCY. PRESS RADIO ON/OFF BUTTON (6) TO TURN

OFF THE RADIO.

SLEEP TO MUSIC

PRESS RADIO ON/OFF BUTTON (6) TO TURN ON THE RADIO, PRESS SNOOZE/SLEEP BUTTON (13)

ONCE TO ENTER SLEEP MODE SETTING, TURN THE TUNE +/- KNOB (4) TO SET SLEEP TIME, YOU

CAN HAVE 5 TO 99 MINUTES PLAYING THE RADIO TO ACCOMPANY YOU TO SLEEP, PRESS THE

SET BUTTON (5) ONCE WHEN YOU FINISH YOUR SLEEP TIME SETTING. RADIO WILL BE TURNED

OFF WHEN YOUR SELECTED SLEEP TIME ARRIVES . IF YOU WANT TO TURN OFF THE RADIO

BEFORE SLEEP TIME HAS EXPIRED, PRESS SNOOZE/SLEEP BUTTON (13) ONCE.

ALARM TIME SETTING

AL1 OR AL2 SETTING: IN NORMAL TIME MODE, PRESS ALM 1 BUTTON (11) OR ALM 2 BUTTON (9)

TO ENTER THE MODE OF ALARM 1 OR ALARM 2. PRESS ALM 1 BUTTON (11) OR ALM 2 BUTTON

(9) AGAIN TO THE NORMAL CLOCK MODE. 2 ALARMS ARE DEFAULTED.

TO SET THE ALARM 1 TIME, THERE ARE 2 WAYS:

- PRESS ALM 1 BUTTON (11) ONCE, THEN PRESS SET BUTTON (5) ONCE THEN TURN THE TUNE

+/- KNOB (4) TO SET THE HOUR OF ALARM 1, PRESS SET BUTTON (5) AGAIN, THEN TURN THE

TUNE +/- KNOB (4) TO SET THE MINUTE OF ALARM 1. PRESS ALM 1 BUTTON (11) ONCE WHEN

YOU FINISH YOU SETTING. LCD DISPLAY WILL BACK TO NORMAL TIME MODE.

- IN CLOCK MODE, PRESS TWICE MODE (3) AND SET (5) TO SET HOUR AND MINUTES OF ALARM1.

EVERYTIME YOU PRESS SET THE ITEM TO BE MODIFIED WILL BLINK. AGAIN YOU WILL USE KNOB

+/- TO ADJUST THEM.

ALARM 2 HAS 2 MODE: BUZZER AND RADIO. TO SELECT ONE OR THE OTHER:

- IN CLOCK MODE, PRESS THREE TIMES MODE (3) AND THEN TURN THE TUNE +/- KNOB (4) TO

SELECT BETWEEN BUZZER AND RADIO AND THEN MODE (3) TO RETURN TO CLOCK MODE.

THERE YOU CAN SET HOUR AND MINUTES OF ALARM 2. EVERYTIME YOU PRESS SET THE ITEM

TO BE MODIFIED WILL BLINK. AGAIN YOU WILL USE KNOB +/- TO ADJUST THEM.

ANOTHER WAY TO DO IT:

TO SET THE ALARM 2 TIME, PRESS ALM 2 BUTTON (9) ONCE, THEN PRESS SET BUTTON (5) ONCE

THEN TURN THE TUNE +/- KNOB (4) TO SET THE HOUR OF ALARM 2, PRESS SET BUTTON (5)

AGAIN THEN TURN THE TUNE +/- KNOB (4) TO SET THE MINUTE OF ALARM 2. PRESS ALM 2

BUTTON (9) ONCE WHEN YOU FINISH YOU SETTING. LCD DISPLAY WILL BACK TO NORMAL (**)

TIME MODE.

WAKE TO MUSIC

1. REPEAT THE STEPS OF ALARM TIME SETTING, ONLY ALM 2 HAVE WAKE TO MUSIC

FUNCTION

2. FOLLOW ABOVE ALARM TIME SETTING TO SET THE DESIRED ALARM TIME.

3. TURN THE TUNE +/- KNOB ONCE TO ACTIVATE WAKE TO RADIO FUNCTION.

4. AFTER FINISHING THE ALARM 2 TIME SETTING , PRESS THE SET BUTTON (5) ONCE TO (**)

CONFIRM TIMER SETTING, AND THE RADIO MEMORY ICON WILL BE SHOWN LCD DISPLAY,

DURING THAT TIME, TURN THE TUNE +/- KNOB (4) TO DESIRED RADIO STATION WHICH YOU

HAVE PRESET BEFORE (MEMORY OPERATION). THEN PRESS THE SET BUTTON (5) TO

CONFIRM.

5. PRESS THE RADIO ON/OFF (6) BUTTON ONCE TO TURN ON THE UNIT, ADJUST THE VOLUME

KNOB (8) TO A DESIRED LISTENING LEVEL. PRESS THE RADIO ON/OFF (6) BUTTON ONCE TO

TURN OFF THE UNIT AND THE RADIO WILL PLAY AUTOMATICALLY AT THE PRESET ALARM TIME.

WAKE TO BUZZER ALARM

1. ALM 1 AND ALM 2 BOTH HAVE “WAKE TO BUZZER ALARM FUNCTION” .

2. SET THE ALARM TIME AS SHOWN ABOVE.

3. TURN THE TUNING KNOB TO SET ALARM 2 TO WAKE UP TO BUZZER ALARM.

SNOOZE OPERATION

WHEN THE ALARM IS ON, PRESS SNOOZE BUTTON (13) ONCE, THE “Zz” ICON WILL SHOWN LCD

DISPLAY, AND THE ALARM WILL BE ON AGAIN AFTER 5 MINUTES.

TURN THE ALARM OFF

DURING THE ALARM ON, PRESS THE SET BUTTON (5) ONCE OR ON/OFF RADIO BUTTON (6) TO

STOP THE ALARM AND ALARM WILL RESUME IN 24 HOURS (THE OTHER DAY).

TO GO TO SLEEP AND WAKE TO MUSIC

REPEAT THE STEPS OF " " AND “ ” AND MADE SURE THAT SLEEP TO MUSIC ALARM TIME SETTING

THE WAKE TO MUSIC/RADIO ICON SHOWN ALARM 2 , PRESS THE RADIO ON/OFF (6) BUTTON

ONCE TO TURN ON THE RADIO, PRESS THE SNOOZE/SLEEP (13) BUTTON ONCE THEN TURN THE

TUNE +/- KNOB (4) TO SET THE MINUTE OF SLEEP TIME FOR A DESIRED PERIOD OF RADIO

PLAYING BEFORE SLEEP AND THE SLEEP ICON WILL BE SHOWN ON LCD DISPLAY. THE RADIO

WILL STOP AUTOMATICALLY AND WILL START AGAIN AT THE PRESET WAKE UP TIME.

MEMORY OPERATION

IT CAN STORE 8AM AND 8FM PRESETS.

-ON RADIO PLAYING MODE, PRESS AM/FM BUTTON (14) TO SELECT AM OR FM BAND. TURN THE

TUNE+/- KNOB (4)TO CHOOSE THE DESIRED FREQUENCY.

-THEN PRESS AND HOLD THE SET BUTTON (5) FOR AROUND 3 SECONDS TO ENTER INTO

PRESET MODE. THE ICON OF ‘CH’ WILL BE APPEARED ON THE RIGHT OF LCD DISPLAY (2). TURN

THE TUNE+/- KNOB (4) TO CHOOSE THE PRESET NUMBER FROM 1 TO 8.

-PRESS SET BUTTON (5) TO COMFIRM THE MEMORY SETTING.

CALL OUT THE PRESET

-DURING RADIO ON, PRESS THE SET BUTTON (5) TO ENTER INTO PRESET MODE. TURN THE

TUNE+/- KNOB (4) TO SELECT THE PRESET CHANNEL OR PRESS M- BUTTON (10)/ M+ BUTTON

(12) TO SELECT THE PRESET CHANNEL.

BATTERY OPERATION

OPEN BATTERY DOOR OF BATTERY COMPARTMENT (15).

INSERT 4PCS 1.5V UM-3 BATTERIES AS INDICATED ON THE CASE. ALKALINE CELLS ARE

RECOMMENDED.

CLOSE THE BATTERY DOOR.

NOTE: CHECK YOUR BATTERIES REGULARLY. OLD OR DISCHARGED BATTERIES MUST BE

REPLACED TO AVOID ACID LEAKING THAT MY DAMAGE YOUR UNIT. IF THE UNIT IS NOT TO BE

USED FOR A LONG TIME, REMOVE THE BATTERIES FROM THE COMPARTMENT.

Disposal of Used Electrical & Electronic Equipment

The meaning of the symbol on the product, its accessory or packaging indicates

that this product shall not be treated as household waste. Please, dispose of this

equipment at your applicable collection point for the recycling of electrical &

electronic equipments waste. In the European Union and Other European

countries which there are separate collection systems for used electrical and

electronic product. By ensuring the correct disposal of this product, you will help

prevent potentially hazardous to the environment and to human health, which

could otherwise be caused by unsuitable waste handling of this product. The

recycling of materials will help conserve natural resources. Please do not

therefore dispose of your old electrical and electronic equipment with your

household waste. For more detailed information about recycling of this product,

please contact your local city office, your household waste disposal service or the

shop where you purchased the product.

Produkt Specifikationer

Mærke:	Sunstech
Kategori:	Radio
Model:	RPDS200
Produktfarve:	Black, Grey
Indbygget skærm:	Ja
Indbyggede højttaler(e):	Ja
Tuner type:	Digital
Udgangseffekt (RMS):	- W
Udgange til hovedtelefoner:	1
Slumretimer:	Ja
Integreret ur:	Ja
Batteritype:	AA
Vækkeur:	Ja
Antal understøttede batterier:	4
Understøttede radiobånd:	AM, FM
MP3-afspilning:	Ingen
Kampatibilitet med Apple-docking:	Ikke understøttet
Radiotype:	Personligt