Synco P2T Manual

Synco Ikke kategoriseret P2T

Læs gratis den danske manual til Synco P2T (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Synco P2T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Thank you for choosing SYNCO product.

Please read this manual carefully before use and follow all instructions mentioned herein.

Microphone P2T

User Manual

Caring For Your SYNCO Product

Package List

Product Instruction

Please keep the product in a dry, clean, dust-free environment.

Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.

Use only a soft and dry cloth for cleaning the product.

Malfunction may be caused by dropping, impact of external force.

Do not attempt to disassemble the product. Doing so voids warranty.

Please have the product checked or repaired by authorized technicians if any malfunctions happened.

Failure to follow all the instructions may result in mechanics damage.

Warranty does not apply to human errors.

TX Transmitter x2

RX Receiver (Type-C

Connector) x1

Wireless Charging Case x1

Charging Cable x1

Type-C to 3.5mm Adapter x1

TX Transmitter RX Receiver Wireless Charging Case

① Power

② Working Indicators

③ Built-in Mic

④ Contacts

⑤ Pocket Clip

① Vocal E󽗈ects/ Mono/Stereo

② Type-C Port

③ Working Indicators

④ Connector

⑤ Contacts

① Pairing/ Power Prompt

② Type-C Port

③ Working Indicators

④ Contacts

Indicator — Transmitter (Double press the Power button to turn o󽗈 light e󽗈ect)

System unpaired

Charging, and then turns o󽗈 when fully charge

System paired, normal working

Low battery

Flash concurrently

Single light keeps on (light e󽗈ect o󽗈)

Single light keeps on (in the case)

Illuminate sequentially(light e󽗈ect on)

Single light 󽗊ashes

Working

Indicators(White

Light)

Working

Indicators(Red Light)

TX Transmitter RX Receiver Wireless Charging Case

Indicator — Receiver

Indicator — Wireless Charging Case

Pairing

System unpaired

Stereo mode (Only original is supported)

System paired

Mono mode-Original sound

Mono mode-Vocal e󽗈ects on

Illuminate sequentially

Flash concurrently

Single light keeps on & Illuminate sequentially

two-way

Illuminate sequentially

Single light 󽗊ashes twice & Illuminate sequentially

Working

Indicators(White Light)

Working

Indicators

(White

Light)

Operations

1. Usage

2. Pairing

3. Charging

① Tap on the right side of charging case to pop out the drawer

② Take the TX and RX out

③ TX should boot automatically as it leaved the case, and switch itself o󽗈 automatically

when returning to the case.

(Forcible switch: Long press the Power button on TX for 3 seconds)

④ RX should boot automatically as it is plugged into smartphone

① Place the TX and RX in the case with their contacts are connected with the case’s

② Long press the Pairing button on the case for 3 seconds with the drawer open

③ The indicators on the TX and RX should light up and illuminate sequentially when

pairing is successful

Note: The transmitter will automatically switch o󽗈 if it is unpaired or disconnected for 5

minutes.

Charge the TX: Place the TX in the case with contacts connected with the case’s.

Charge the case: Connect the case with power supply via the charging cable.

Long press for 3 seconds

4. Check the power

5. Use vocal e󽗈ects

TX: Short press the Power button, the indicators will light up according to remain power

for 5 seconds

Charging Case: Short press the Power Prompt button, the indicators will light up

according to remain power for 5 seconds

Short press the Vocal E󽗈ects button on the receiver to switch sound e󽗈ects: Original >> Studio FX >> KTV FX >> Voice

Ampli󽗉cation >> EDM (Electronic Dance Music) >> Baby FX >> Male to Female >> Female to Male >> Monster FX.

Default e󽗈ect: Original.

Note: The vocal e󽗈ect will apply to both transmitters. In Stereo mode, only original is supported. Other vocal e󽗈ects are

unavailable.

6. Mono/ Stereo

Mono-Original

Mono-Other vocal e󽗈ects

Mono-Original

Long press the Mono/Stereo button on the RX once

Stereo

Produkt Specifikationer

Mærke:	Synco
Kategori:	Ikke kategoriseret
Model:	P2T

Har du brug for hjælp?

Hvis du har brug for hjælp til Synco P2T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Synco Manualer

Synco XVIEW M4 Manual

28 September 2025

Synco X-Talk X2 Manual

11 September 2025

Synco XTalk XPro Manual

25 Februar 2025

Synco X-Talk X9 Manual

25 Februar 2025

Synco X-Talk X1 Manual

25 Februar 2025

Synco X-Talk X5 Manual

3 September 2024

Synco CMic-V2 Manual

20 August 2024

Synco P2L Manual

19 August 2024

Synco P2T Manual

19 August 2024

Synco WAir-G1T Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Siemens WQ32G28IL Manual

6 December 2025

MDT BE-TA550606.02 Manual

6 December 2025

Opticis USC-CC32 Manual

6 December 2025

Audio-Technica AT33xMONO Manual

6 December 2025

Bosch SPI4EMS24E Manual

6 December 2025

Fostex P1000K Manual

6 December 2025

Advantech UTC-124I1 Manual

6 December 2025

Anton/Bauer Titon Micro Kit Manual

6 December 2025

Philips Zoom! DayWhite DIS130 Manual

6 December 2025

Opticis USB-FC30AA Manual

6 December 2025