Tach-It KL-150 Manual

Tach-It Etiketprinter KL-150

Læs gratis den danske manual til Tach-It KL-150 (4 sider) i kategorien Etiketprinter. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Tach-It KL-150, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

INSTRUCTION

MANUAL FOR

TACH-IT MODEL KL-100 and KL-150

PRESSURE SENSITIVE

LABEL DISPENSER

Ben Clements and Sons, Inc. / Clements Industries, Inc.

50 Ruta Court, South Hackensack, New Jersey 07606 USA

Tel: 201-440-5500 or 800-222-5540 Fax: 201-440-1455

Email: sales@tach-it.com Web: www.tach-it.com

Tach-It is a registered trademark of Ben Clements and Sons, Inc. Clements Industries, Inc. May 2012

SECTION 1 – CAUTIONS

1) BEFORE OPERATING THE MACHINE, READ THE COMPLETE OPERATOR’S MANUAL.

2) NEVER HAVE THE POWER ON THIS MACHINE PLUGGED INTO THE POWER SOURCE

WHEN ANY OF THE COVERS OF THIS MACHINE HAVE BEEN REMOVED. THIS

MACHINE HAS A HIGH VOLTAGE INPUT, AND ELECTRICAL SHOCKS ARE

POSSIBLE IF PLUGGED IN AND THE COVERS ARE REMOVED.

3) NEVER ATTEMPT TO MOVE THIS MACHINE BY THE ARM THAT HOLDS THE ROLL OF

LABELS OR THE REWIND ARM.

4) INSTALL AND OPERATE THIS MACHINE ONLY ON A FLAT, LEVEL, AND DRY SUR

FACE.

5) USE ONLY THE SPECIFIED ELECTRICAL POWER INPUT WITH THIS MACHINE.

6) ALWAYS KEEP HANDS, CLOTHING, JEWELRY, AND HAIR AWAY FROM ALL MOVING

PARTS OF THIS MACHINE.

7) DO NOT OPERATE THIS MACHINE WITHOUT THE COVERS PROPERLY INSTALLED, OR

IF ANY OF THE GUARDS HAVE BEEN REMOVED.

8) KEEP THIS MACHINE CLEAN AND DRY AT ALL TIMES.

9) SERVICE ON THIS MACHINE SHOULD ONLY BE PERFORMED BY FACTORY TRAINED

AUTHORIZED SERVICE PERSONNEL.

10) NEVER USE THIS MACHINE FOR OTHER THAN ITS INTENDED APPLICATION. USE

OF THE MACHINE ON UNINTENDED APPLICATIONS CAN CAUSE HARM TO THE

OPERATOR AND THE MACHINE. PLEASE CONTACT THE MANUFACTURER IF

THERE IS ANY QUESTION AS TO WHETHER THIS MACHINE CAN BE USED FOR A

PARTICULAR APPLICATION

SECTION 2 – SPECIFICATIONS

KL-100 KL-150

LABEL SIZE MAXIMUM 4.25” WIDE X 12” LONG 6” WIDE X 12” LONG

MINIMUM 3/8” WIDE X 5/8” LONG 3/8” WIDE X 5/8” LONG

LABEL ROLL MAXIMUM 10” O.D. 10” O.D.

SPEED 25 FT PER MINUTE 25 FT PER MINUTE

POWER 110 VOLT A.C. 110 VOLT A.C.

DIMENSIONS LENGTH = 10” LENGTH = 10”

WIDTH = 11” WIDTH = 13”

HEIGHT = 8” HEIGHT = 8”

WEIGHT = 12 LBS WEIGHT = 13 LBS

Produkt Specifikationer

Mærke:	Tach-It
Kategori:	Etiketprinter
Model:	KL-150

Har du brug for hjælp?

Hvis du har brug for hjælp til Tach-It KL-150 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Etiketprinter Tach-It Manualer

Tach-It SH-400 Manual

23 August 2024

Tach-It KL-100 Manual

23 August 2024

Tach-It 6500-TL Manual

23 August 2024

Tach-It SH-408 Manual

23 August 2024

Tach-It LB-7 Manual

23 August 2024

Tach-It SH-402TR Manual

23 August 2024

Tach-It SH-455 Manual

23 August 2024

Tach-It KL-150 Manual

23 August 2024

Tach-It 6510-TL Manual

23 August 2024

Tach-It BL-1 Manual

23 August 2024

Etiketprinter Manualer

Nyeste Etiketprinter Manualer

SATO M10e Manual

2 Oktober 2025

JADENS JD-268BT Manual

2 Oktober 2025

SparkGO SP-H55 Manual

1 Oktober 2025

1 Oktober 2025

1 Oktober 2025

1 Oktober 2025

1 Oktober 2025

1 Oktober 2025

1 Oktober 2025

SATO CL4NX Plus Manual

30 September 2025