Tado Wireless Temperature Sensor Manual

Tado Termostat Wireless Temperature Sensor

Læs gratis den danske manual til Tado Wireless Temperature Sensor (8 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Tado Wireless Temperature Sensor, eller vil du spørge andre brugere om produktet?

Side 1/8
Manual for Professional
Installers
DIY Installation
If you are a professional installer, please not download the tado˚ app. There you will find specific installation instructions.
This manual is meant exclusively for professional installers. It includes generic instructions to install the Wireless
Receiver (Programmer) and the Wireless Temperature Sensor.
For the Starter Kit - Wireless Smart Thermostat V3+
(Incl. Programmer with Hot Water Control)
Manual version 3.2
A. Remove the battery
protection strip.
B. Press the button for
3 sec to start pairing.
C. Pairing may take up
to 2 min.
D. The static icon below
indicates successful pairing.
If pairing fails (E0), make sure the distance between the devices is approximately 3 meters. Pair again by pressing the
button for 3 sec.
2. Pair the Wireless Temp. Sensor
1. Install the Internet Bridge
A. Connect the Internet Bridge to the router.
If no free USB port is available on the router, use the
included 5V power adapter.
B. Press and hold the pairing button until the pairing LED
starts blinking.
2
min
3
sec
Solid on
Blinking


Produkt Specifikationer

Mærke: Tado
Kategori: Termostat
Model: Wireless Temperature Sensor

Har du brug for hjælp?

Hvis du har brug for hjælp til Tado Wireless Temperature Sensor stil et spørgsmål nedenfor, og andre brugere vil svare dig