Tamron 150-500mm F/5-6.7 Di III VC VXD Manual

Tamron Linse 150-500mm F/5-6.7 Di III VC VXD

Læs gratis den danske manual til Tamron 150-500mm F/5-6.7 Di III VC VXD (4 sider) i kategorien Linse. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Tamron 150-500mm F/5-6.7 Di III VC VXD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

TLM-A057X-T/T-2209-01

Model:

A 057

Owner’s manual

* The Marking is a directive conformity mark of the European Community (EC).

* Das -Zeichen entspricht der EC Norm.

* La marquage est un marquage de conformité .à la direcive CEE (CE)

* La marca es marca de conformidad segun directiva de la Comunidad Europea (CE).

* Il marchio attesta la conformita alla directtiva della Comunit .à Europea (CEE)

* 标志表示符合欧州共同体(EC)指标

The EEC Conformity Report applies to the Council

Directive 2014/30/EU, 2011/65/EU and is used by

Tamron Co., Ltd., manufacturer of this product.

150-500mm F/5-6.7

III

VC VXD

For Sony E

For FUJIFILM X (APS-C)

FUJIFILM

19 18

Sony

FUJIFILM

19 18

Focusing

Zooming

󱦯

󱦱

󱦷

󱦻󱦽󱦿

FUJIFILM

󱦻



󱦽



󱦿



󱧁

󱧃

󱧅

󱧇

󱧂

󱧄

󱧆

󱧈

󱦹

󱦳 󱦵

For FUJIFILM X Mount Lens

FreeRTOS Kernel V10.3.1

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation

ﬁles (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify,

merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT

NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT

OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

http://www.FreeRTOS.org

http://aws.amazon.com/freertos

ENGLISH

Thank you for purchasing this Tamron lens. Before using your new lens, please read the contents

of this Owner’s manual to properly use the lens. Also, it will be important to read the manual of the

camera to which you will attach the lens.

After reading, store this Owner’s manual in a safe place.

Please read also the document “Precautions for Safe Use of Tamron Lenses” supplied with the

lens for the detailed safety precautions to observe when using Tamron lenses.

•

Explains precautions that help to prevent problems.

•

Explains things you should know in addition to basic operations.

PART NAMES (Refer to Fig. )󱦯

①

Lens hood

②

Hood attaching alignment mark

③

Hood locking mark

④

Filter ring

⑤

Hood release mark

⑥

Zooming ring

⑦

Focal length scale

⑧

Focal length mark

⑨

Focus ring

⑩

Tripod mount

⑪

Tripod mount mark

⑫

Tripod mount locking screw

⑬

Screw hole for safety lock screw

⑭

Safety lock screw (×2)

⑮

Hexagonal wrench

⑯

Strap hole

⑰

Lens attachment mark

⑱

AF/MF switch (For Sony E) / MF SPEED switch (For FUJIFILM X)

⑲

VC (Vibration Compensation) switch

⑳

VC mode switch

㉑

Focus limiter switch

㉒

Lens-camera interface contacts

㉓

Wide-end zoom lock switch

•

Before using the lens, make sure to remove the tape on lens surface.

MAIN SPECIFICATIONS

Model A057

Focal Length 150-500 mm

Maximum Aperture F/5-6.7

Angle of View (diagonal) 16

- 4

' /

- 3

(APS-C)

Optical Construction 16/25

Minimum Object Distance (MOD) 0.6 m (23.6

) (Wide) / 1.8 m (70.9

) (Tele)

Maximum Magnication Ratio 1:3.1 (Wide MOD) / 1:3.7 (Tele MOD)

Filter Size

82 mm

Length 209.6 mm (8.3

) / Sony E, 209.9 mm (8.3

) / FUJIFILM X

Maximum Diameter

93 mm

Weight

1,725 g (60.8 oz) / Sony E, 1,710 g (60.3 oz) / FUJIFILM X (without tripod mount), Tripod mount 155 g (5.5 oz)

Lens Hood HA057

•

Length : From tip of front element to mount surface.

•

Specications, appearance, functionality, etc. are subject to change without prior notice.

ATTACHING AND REMOVING THE LENS

Remove the rear cap of the lens. Align the lens attachment mark

⑰

and mounting mark on the

camera, and then insert the lens.

Turn the lens clockwise until it locks.

To remove the lens, turn the lens in the opposite direction while pressing the lens release button

on the camera.

•

Turn off the power of the camera before attaching or removing the lens.

•

For details, please read the instruction manual of your camera.

SWITCHING FOCUS MODE (Ref. Figs. )󱦯, 󱦱

■

For Sony E: AF/MF Switching (Ref. Figs.

󱦯

󱦱

)

To shoot using autofocus (AF), set both the camera and the AF/MF switch

⑱

on the lens to

“AF”. (Ref. Fig.

󱦱

) (If the lens is set at “MF”, it will not autofocus.)

To shoot using manual focus (MF), set the camera and/or the lens AF/MF switch

⑱

to “MF”.

For manual focus, turn the focus ring

⑨

to acquire the focus. (Ref. Figs.

󱦯

󱦱

)

■

For FUJIFILM X: MF SPEED Switching (Ref. Figs.

󱦯

󱦱

)

When you choose “MANUAL FOCUS” on the camera body, you may select the focus response

speed by the selector switch

⑱

on the lens.

MODE 1 For normal focusing, average response speed

MODE 2 For precise focusing, slower response speed

•

Under AF mode, there may be difculty for autofocus to work depending on the subject.

•

For Sony E mount lens, if your camera features an AF/MF control button, it is possible to

temporarily switch to MF from AF by pressing the AF/MF control button. When the lens set to “AF”

and the camera set to “MF”, by pressing the AF/MF control button you may temporarily switch the

focus to AF.

•

For details, please read the instruction manual of your camera.

VIBRATION COMPENSATION MECHANISM (Ref. Figs. )󱦯, 󱦷, 󱦹

To compensate for the vibrations, set the VC (Vibration Compensation) switch

⑲

to ON.

(Ref. Fig.

󱦷

)

■

Switching the modes (Ref. Fig.

󱦹

)

You can switch the modes by using the VC mode switch

⑳

MODE 1 Basic vibration compensation mode

MODE 2 Panning mode

MODE 3 Mode that prioritizes framing. Makes it easier to maintain subjects moving quickly

within the frame.

MODE 1 and MODE 3 do not support panning.

●

Vibration compensation is effective under the following conditions

•

Dimly lit locations

•

Locations where ash photography is prohibited

•

Locations where tripod cannot be used

●

Vibrations may not be compensated sufciently under the following conditions

•

When a photograph is taken from a vehicle that is shaking greatly

•

Shooting during excessive movement of the camera

•

When shooting while using a tripod

•

Set the VC switch

⑲

to OFF when taking pictures with bulb photography (long exposures).

Otherwise, vibration compensation may cause a malfunction.

•

When MODE 1 or MODE 2 is set, the viewnder image may become blurred immediately after the

shutter button is pressed halfway. This is due to the principles of the vibration compensation

mechanism and not a malfunction.

•

When MODE 3 is set, the viewnder image may become blurred even without touching the shutter

button in the case the camera is turned on with the VC switch

⑲

set to ON. This is due to the

principles of the vibration compensation mechanism and not a malfunction.

•

Set the VC switch

⑲

to OFF when you are shooting while the camera is secured by something

other than your hand (such as a tripod).

•

You may feel the lens rattle when the camera is turned off or when the lens is removed from the

camera. This is not a malfunction.

•

For details, please read the instruction manual of your camera.

USING THE FOCUS LIMITER (Ref. Figs.

󱦯

󱦻

󱦿

for Sony E /

󱦻



󱦿

for FUJIFILM X)

When autofocus is set, switching the focus limiter switch

㉑

can speed up focusing by limiting the

focus range.

For Sony E mount lens

■

To limit the autofocus range to subjects from innity to 3 m (Ref. Fig.

󱦻

)

Set the focus limiter switch

㉑

to “

∞

-3m”.

■

To limit the autofocus range to subjects from innity to 15 m (Ref. Fig.

󱦽

)

Set the focus limiter switch

㉑

to “

∞

-15m”.

■

When not using the focus limiter (Ref. Fig.

󱦿

)

Set the focus limiter switch

㉑

to “FULL”.

For FUJIFILM X mount lens

■

To limit the autofocus range to subjects from MOD

to 10 m (Ref. Fig.

󱦻

)

Set the focus limiter switch

㉑

to “MOD-10m”.

■

To limit the autofocus range to subjects from 10 m to innity (Ref. Fig.

󱦽

)

Set the focus limiter switch

㉑

to “10m-

∞

”.

■

When not using the focus limiter (Ref. Fig.

󱦿

)

Set the focus limiter switch

㉑

to “FULL”.

MOD: Minimum Object Distance

ZOOMING (Ref. Fig. )󱦯

Turn the zooming ring

⑥

to adjust the focal length (Zoom position) to a desired position.

WIDE-END ZOOM LOCK MECHANISM (Ref. Figs. )󱦯, 󱦳, 󱦵

You can lock the zooming ring

⑥

at a focal length of 150 mm to keep it from rotating.

■

Setting the zoom lock (Ref. Fig.

󱦳

)

Align 150 mm on the focal length scale

⑦

with the focal length mark

⑧

Set the wide-end zoom lock switch

㉓

to the zooming ring side.

■

Releasing the zoom lock (Ref. Fig.

󱦵

)

Set the wide-end zoom lock switch

㉓

to the camera side.

•

To zoom, release the lock, and then rotate the zooming ring

⑥

FLEX-ZOOM LOCK MECHANISM (Ref. Figs. )󱦯, 󱧁, 󱧂

This mechanism is intended to stop the lens from zooming inadvertently at any position.

Rotate the zooming ring

⑥

to the desired zoom position, and then apply the lock after you have

determined the position.

■

Setting the zoom lock (Ref. Fig.

󱧁

)

Move the zooming ring

⑥

to the subject side until the white mark is visible.

■

Releasing the zoom lock (Ref. Fig.

󱧂

)

Move the zooming ring

⑥

to the camera side.

•

During activities such as carrying the product, use the wide-end zoom lock to prevent zooming

due to its own weight. (Ref. Figs.

󱦯

󱦳

)

•

To zoom, release the ex-zoom lock, and then rotate the zooming ring

⑥

•

Take care not to get your ngers caught while you switch the ex-zoom lock.

•

If the camera will not be used for an extended period, release the ex-zoom lock before storage.

LENS HOOD (Ref. Figs. )󱦯, 󱧃, 󱧄

A bayonet-type lens hood

①

is provided as standard equipment.

We recommend shooting with the hood properly attached because the lens hood eliminates stray

light that may affect the picture.

■

Using the lens hood (Ref. Fig.

󱧃

)

Align the hood attaching alignment mark

②

of the hood with the hood release mark

⑤

of the

lens.

Rotate the hood

①

in the direction of the arrow until the hood locking mark

③

meets the hood

release mark

⑤

■

Stowing the lens hood (Ref. Fig.

󱧄

)

You can stow the lens hood

①

by attaching it in reverse.

Align the hood locking mark

③

of the hood with the hood release mark

⑤

of the lens.

Rotate the hood

①

in the direction of the arrow until the hood attaching alignment mark

②

meets the hood release mark

⑤

•

Be aware that the periphery of the photographed image may be darkened if the hood

①

is not

attached properly.

Produkt Specifikationer

Mærke:	Tamron
Kategori:	Linse
Model:	150-500mm F/5-6.7 Di III VC VXD
Vægt:	1710 g
Produktfarve:	Sort
Diameter:	93 mm
Manuel fokus:	Ja
Grænseflade til montering af objektiv:	Fujifilm X
Autofokus:	Ja
Længde:	209.6 mm
Nærmeste fokuseringsafstand:	0.6 m
Maksimale blænderåbning tal:	5
Komponent til:	MILC
Brændviddeområde:	150 - 500 mm
Kameramærker kompatibilitet:	Fujifilm
Objektivstruktur (elementer/grupper):	25/16
Objektivtype:	Teleobjektiv
Filterstørrelse:	82 mm
Antal membranblade:	7
Mindste blænderåbnimg tal:	32
Blændeområde (F-F):	5 - 32
Betragtningsvinkel:	16.25 °